Compare Equipment Go Back
 A11 Auger |
|
|
|
| Drive Shaft Torque at Maximum Pressure | 815 lb/ft | - | - |
|---|---|---|---|
| Drive Method | Gerotor Motor - Direct Drive | - | - |
| Mounting Bracket Design | 2 Ton Mini Excavator Pin On | - | - |
| Required Hydraulics | Standard Flow | - | - |
| Optimal Hydraulic Flow | 75-90 L/min (20-24 gpm) | - | - |
| Optimal Hydraulic Pressure | 105-150 bar (1523-2176 psi) | - | - |
| Overall Width - With Bracket | 11 in | - | - |
| Overall Length - With Bracket | 11 in | - | - |
| Overall Height | 35.4 in | - | - |
| Housing Diameter | 11 in | - | - |
| Swing Range (fore/aft) | 36 degrees | - | - |
| Swing Range (L/R) | 76 degrees | - | - |
| Weight | 178.6 lb | - | - |
| Motor Displacement | 24 in³ | - | - |
| Bit Speed at Maximum Flow | 191 rpm | - | - |
| Hex Output Shaft Size | 2 in | - | - |
