Compare Equipment Go Back

826 Landfill Compactor
CS12 GC Vibratory Soil Compactor
CP44B Vibratory Soil Compactor
CS11 GC Vibratory Soil Compactor
CC2.7 GC Utility Compactor
CB2.9 Utility Compactor

Engine

Gross Power - SAE J1995:2014 435 hp - - - - -
Net Power - SAE J1349:2011 405 hp 111.2 hp - 111.2 hp - -
Net Power - ISO 9249:2007 405 hp - - - - -
Engine Power - ISO 14396:2002 426 hp - - - - -
Engine Model C15 Cat® Cat C3.6 Cat C3.4B Cat® C3.6 C1.7T C1.7T
Emissions U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA - - U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, Japan 2014 - -
Rated Speed 1800 - - - - -
Torque Rise 33% - - - - -
Bore 5.4 in 3.9 in - 3.9 in - -
Stroke 6.7 in 4.7 in - 4.7 in - -
Displacement 927.6 in³ - - - - -
High Idle Speed 2300 r/min - - - - -
Low Idle Speed 800 r/min - - - - -
Maximum Altitude – Without Derating (Tier 4 Final/Stage V) 9298 ft - - - - -
Maximum Altitude - Without Derating (Tier 3/Stage IIIA) 9098 ft - - - - -
Note Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. - - - - -
Gross Power - 120.7 hp 100.6 hp 122.9 hp - -
Net Power - ISO 9249 - 112.2 hp - 112.2 hp - -
Engine Power - ISO 14396 - - - 120.7 hp - -
Note (1) - - - Net power advertised is the power available at the engine flywheel when equipped with a fan at maximum speed, air cleaner, clean emissions module, and alternator. - -
Engine Power (1) - - - - 24.7 hp 48.2 hp

Operating Specifications

Operating Weight (Tier 4 Final/Stage V) 90207 lb - - - - -
Operating Weight (Tier 3/Stage IIIA equivalent) 89186 lb - - - - -
Maximum Operating Weight (Tier 4 Final/Stage V) 92568 lb - - - - -
Maximum Operating Weight (Tier 3/Stage IIIA equivalent) 91549 lb - - - - -
Compaction Width - 84 in 66 in - - -
Curb Clearance - 19.4 in - 19.4 in 17.8 in 17.8 in
Ground Clearance - 20.4 in 16.1 in 20.4 in 11.2 in 11.2 in
Turning Radius - Inside Drum Edge - 12.7 ft 10 ft 12.7 ft 100 in 98 in
Travel Speed - Maximum - 6.8 mile/h 7 mile/h 6.8 mile/h 5.3 mile/h 7.5 mile/h
Static Linear Load - With ROPS/FOPS - 202.9 lb/in - - - -
Drum Width - - - 84 in - -
Drum Offset - - - - 2 in 2 in
Static Linear Load - - - - 61 lb/in 59.8 lb/in
Turning Radius - Outside Drum Edge - - - - 147.2 in 149.2 in
Speed Range - - - - - 12 km/hr 7.5 mph

Transmission

Transmission Type Planetary - Powershift - ECPC - - - - -
Direct Drive - Forward 1 4.2 mile/h - - - - -
Direct Drive - Forward 2 7.5 mile/h - - - - -
Direct Drive - Reverse 1 4.3 mile/h - - - - -
Direct Drive - Reverse 2 8.6 mile/h - - - - -

Hydraulic System

Pump Flow at 1800 rpm 30.9 gal/min - - - - -
Main Relief Pressure 3771 psi - - - - -
Maximum Supply Pressure 3495 psi - - - - -
Lift System Double Acting Cylinder - - - - -
Bore 4.7 in - - - - -
Stroke 42.1 in - - - - -

Service Refill Capacities

Cooling System 30.6 gal (US) - - 4.9 gal (US) - -
Engine Crankcase 9 gal (US) - - - - -
Transmission 17.4 gal (US) - - - - -
Fuel Tank 206.6 gal (US) - - - - -
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V) 8.5 gal (US) - - - - -
Differential - Final Drives - Front 26.4 gal (US) - - - - -
Differential - Final Drives - Rear 29.1 gal (US) - - - - -
Hydraulic Tank Only 35.4 gal (US) - - - - -
Note Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, H - - - - -
Fuel Tank Capacity - 56.3 gal (US) 37 gal (US) 56.3 gal (US) 14.37 gal (US) 14.37 gal (US)
DEF Tank - - - 5 gal (US) - -
Engine Oil - With Filter - - - 3.1 gal (US) - -
Eccentric Weight Housings (combined) - - - 6.9 gal (US) - -
Axle and Final Drives - - - 2.6 gal (US) - -
Hydraulic Tank - - - 6.1 gal (US) - -
Water Spray Tank Capacity - - - - 42.24 gal (US) 52.8 gal (US)

Axles

Front Planetary - Fixed - - - - -
Rear Planetary - Oscillating - - - - -
Oscillation Angle ±5° - - - - -

Braking System

Service Brakes Multi Disc Wet (Enclosed) 2 WHL - - - - -
Parking Brake Drum and Shoe, Spring Applied, Hydraulic Released - - - - -

Sound Performance - Tier 4 Final / Stage V

Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - - - - -
Machine Sound Power Level (ISO 6395:2008) 113 dB(A) - - - - -
Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - - - -
Machine Sound Power Level (ISO 6395:2008)* 110 dB(A) - - - - -
Note (1) * Sound suppression equipped - - - - -
Note (2) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - - - - -
Note (3) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - - - - -
Note (4) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - - - -

Sound Performance - Tier 3 / Stage IIIA

Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - - - - -
Machine Sound Power Level (ISO 6395:2008) 113 dB(A) - - - - -
Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - - - -
Machine Sound Power Level (ISO 6395:2008)* 110 dB(A) - - - - -
Note (1) * Sound suppression equipped - - - - -
Note (2) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - - - - -
Note (3) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - - - - -
Note (4) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - - - -

Hydraulic System - Steering

Steering System - Circuit Pilot operated, load sensing - - - - -
Bore 4.5 in - - - - -
Stroke 22.7 in - - - - -
Steering System - Pump Piston - Variable Displacement - - - - -
Maximum System Flow 170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm) - - - - -
Steering Pressure Limited 3481 psi - - - - -
Vehicle Articulation Angle 86 ° - - - - -

Dimensions (Approximate)

Height to Top of Air Conditioning Condenser 14.99 ft - - - - -
Height - Cab Roof 13.75 ft - - - - -
Height - Top of Beacon 15.63 ft - - - - -
Height - Top of Exhaust Pipe 14.56 ft - - - - -
Height - Top of Hood 10.87 ft - - - - -
Ground Clearance - Bumper 3.15 ft - - - - -
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard 9.38 ft - - - - -
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard 10.16 ft - - - - -
Hitch to Centerline of Front Axle 6.07 ft - - - - -
Wheel Base 12.14 ft - - - - -
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard 28.59 ft - - - - -
Ground Clearance 2.11 ft - - - - -
Width - Over Wheels 12.47 ft - - - - -
Turning Radius - Inside of Wheels 9.18 ft - - - - -

Straight Blade

Width – Moldboard Length 14.16 ft - - - - -
Width - Over End Bits 14.75 ft - - - - -
Height with Cutting Edge and Screen 6.23 ft - - - - -
Maximum Depth of Cut 1.5 ft - - - - -
Maximum Lift above Ground 4.19 ft - - - - -
Capacity, Rated 16.1 yd³ - - - - -
Overall Machine Length (includes rear radiator guard, measured to cutting edge) 28.59 ft - - - - -

Semi U-Blade

Width – Moldboard Length 14.66 ft - - - - -
Width - Over End Bits 14.83 ft - - - - -
Height with Cutting Edge and Screen 6.63 ft - - - - -
Maximum Depth of Cut 2.03 ft - - - - -
Maximum Lift above Ground 3.825 ft - - - - -
Capacity, Rated 20.9 yd³ - - - - -
Overall Machine Length (includes rear radiator guard, measured to cutting edge) 29.54 ft - - - - -

U-Blade

Width – Moldboard Length 14.25 ft - - - - -
Width - Over End Bits 14.41 ft - - - - -
Height with Cutting Edge and Screen 6.62 ft - - - - -
Maximum Depth of Cut 2.03 mm - - - - -
Maximum Lift above Ground 3.79 ft - - - - -
Capacity, Rated 22.9 yd³ - - - - -
Overall Machine Length (includes rear radiator guard, measured to cutting edge) 30.7 ft - - - - -

Wheels

Combination Tips (Weight Group) 21125 lb - - - - -
Plus Tips - Weight (Group) 22002 lb - - - - -
Paddle Tips - Weight (Group) 20540 lb - - - - -
Diamond Tips Weight (Group) 23997 lb - - - - -
Outside Diameter 77.6 in - - - - -
Outside Diameter - Diamond 78.1 in - - - - -
Drum Diameter 63.4 in - - - - -
Drum Width 47.2 in - - - - -
Feet Per Row 6 - - - - -
Feet Per Wheel 30 - - - - -
Replaceable Weld On - - - - -
Width Over Drums 3800 mm - - - - -
Tip Height 179 mm - - - - -
Tip Height - Diamond 7.25 in - - - - -

Weights

Operating Weight - With Cab - 27900 lb 16471 lb 24775 lb - -
Operating Weight - With ROPS/FOPS Canopy - 27560 lb - 24435 lb - -
Weight - Drum with ROPS/FOPS Canopy - 16955 lb - 13453 lb - -
Weight - Drum with Cab - 17051 lb 8181 lb 13549 lb - -
Operating Weight - With ROPS/FOPS - - 15935 lb - - -
Weight - Drum with ROPS/FOPS - - 7939 lb - - -
Note (1) - - - Operating weights are approximate and consider full fluids and 75 kg (165 lb) operator. Cab weights include heat and air conditioning. - -
Standard Operating Weight with ROPS - - - - 5718 lb 6415 lb
Maximum Weight at Front Drum - - - - 2882 lb 3060 lb
Maximum Weight at Rear Wheels - - - - 2836 lb -
Maximum Operating Weight - - - - 3114 lb -
Maximum Operating Weight with ROPS - - - - - 6415 lb
Maximum Operating Weight with Cab - - - - - 6415 lb
Maximum Weight at Rear Drum - - - - - 3355 lb
Static Linear Load - - - - - 59.8 lb/in

Dimensions

Overall Length - 18.7 ft 16.7 ft 18.7 ft 100.2 in 99.2 kg/cm
Overall Width - 7.5 ft 5.91 ft 7.5 ft 51.7 in 55.6 in
Drum Width - 84 in 66 in - 47.2 in 51.2 in
Height - With ROPS/FOPS or Cab - 9.8 ft 9.35 ft - - -
Drum Diameter - 60.4 in - 60.4 in 28.3 in 28.3 in
Optional Blade Height - 27.1 in 22.6 in - - -
Wheel Base - 9.8 ft 8.5 ft 9.8 ft 70.9 in 70.9 in
Overall Width - With Blade Option - - 6.95 ft - - -
Overall Length - With Blade Option - - 18.41 ft - - -
Drum Diameter - Over Pads - - 48.2 in - - -
Compaction Width - - - 84 in 51.7 in 51.2 in
Maximum Height - - - 9.9 ft - -
Height - ROPS - - - - 102.2 in 70.8 in

Vibratory System

Nominal Amplitude - High - 0.079 in 0.063 in 0.079 in 0.02 in 0.02 in
Nominal Amplitude - Low - 0.039 in 0.031 in 0.039 in - -
Centrifugal Force - Maximum - 56202 lbf 29900 lb 56200 lb 6968.8 lb 8109 lb/ft
Centrifugal Force - Minimum - 33497 lbf 15000 lb 33500 lb - -
Vibratory Frequency - Ecomode - 1716-1890 vpm - - - -
Vibratory Frequency - Standard - 1800-1980 vpm 1914 V/m - - -
Variable Frequency Option Range - - 23.3-31.9 Hz (1400-1914 vpm) - - -
Static Linear Load - With Cab - - - 161.3 lb/in - -
Static Linear Load - With ROPS/FOPS Canopy - - - 160.1 lb/in - -
Frequency - - - - 62 Hz 3840 VPM

Tires

Tires - 23.1 x 26 14.9 × 24 8-ply traction - - -

Sustainability

Recyclability - 96 - 94% - -
Add a Similar Product:
  • CP56B Vibratory Soil Compactor Add
  • CS44B Vibratory Soil Compactor Add
  • CP11 GC Vibratory Soil Compactor Add
  • CS10 GC Vibratory Soil Compactor Add
  • CB13 Tandem Vibratory Roller Add
  • CB15 Tandem Vibratory Roller Add
  • CB16 Tandem Vibratory Roller Add
  • CB4.4 Utility Compactor Add
  • CB4.4 Utility Compactor Add
  • CB4.0 Utility Compactor Add