Compare Equipment Go Back
 988 Wheel Loader |
 990 Wheel Loader |
 930M Aggregate Handler Small Wheel Loader |
 988 GC Wheel Loader |
|
Engine |
||||
|---|---|---|---|---|
| Engine Power - ISO 14396:2002 | 580 hp | 752 hp | - | - |
| Engine Model | Cat® C18 | Cat® C27 | Cat® C7.1 | Cat® C15 |
| Rated Speed | 1700/rpm | 1800 r/min | - | 2000 |
| Peak Power Speed | 1500/rpm | - | - | 1600 |
| Gross Power - SAE J1995:2014 | 588 hp | 766 hp | - | 456 hp |
| Net Power - SAE J1349:2011 | 538 hp | - | - | 373 hp |
| Bore | 5.7 in | 5.4 in | 4 in | 5.4 in |
| Stroke | 7.2 in | 6 in | 5 in | 6.75 in |
| Displacement | 1105 in³ | 1649.5 in³ | 427 in³ | 927 in³ |
| Peak Torque - 1,200 rpm | 2104 lbf·ft | 2624 lb/ft | - | - |
| Torque Rise | 58 % | 18 % | - | 16% |
| Note (1) | Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio | - | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. | - |
| Note (2) | Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. | - | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. | - |
| Emissions | - | Option 2 - Emits equivalent to U.S. EPA Tier 2 | The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards. | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 |
| Net Power - SAE J1349:2011 - Standard Ambient | - | 699 hp | - | - |
| Net Power - SAE J1349:2011 - High Ambient | - | 648 hp | - | - |
| Note | - | Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator. | - | - |
| Maximum Gross Power | - | - | 168 hp | - |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | - | - | 601 ft·lbf | - |
| Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) | - | - | 160 hp | - |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | - | - | 586 ft·lbf | - |
| Note (3) | - | - | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. | - |
| Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) | - | - | 168 hp | - |
| Maximum Rated Gross Power - ISO 14396 | - | - | 168 hp | - |
| Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | - | - | 588 ft·lbf | - |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | - | - | 573 ft·lbf | - |
| Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | - | - | 1600 r/min | - |
| Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | - | - | 1800 r/min | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | - | 164 hp | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | - | 163 hp | - |
| Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) | - | - | 170 hp | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | - | 166 hp | - |
| Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) | - | - | 587 ft·lbf | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | - | 156 hp | - |
| Maximum Rated Gross Power - ISO 14396 (metric) | - | - | 170 hp | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | - | 158 hp | - |
| Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*) | - | - | 572 ft·lbf | - |
| Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) | - | - | 162 hp | - |
| Net Power (Performance Power Mode: Range 1-4) | - | - | 1800 r/min | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | - | 156 hp | - |
| Net Power (Standard Power Mode: Range 1-3*) | - | - | 1600 r/min | - |
| Engine Power - ISO 14396: 2002 | - | - | - | 449 hp |
| Peak Torque - 1,200 rpm - SAE J1995 | - | - | - | 1778 ft·lbf |
Operating Specifications |
||||
| Operating Weight | 112574 lb | - | - | 116858 lb |
| Bucket Capacity Range | 4.7-13 m3 (6.2-17 yd3) | 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) | - | 6.4-7.6 m3 (8.3-10 yd3) |
| Rated Payload - Quarry Face | 12.5 t | - | - | 12.5 ton (US) |
| Rated Payload - Loose Material | 16 t | - | - | - |
| Cat Truck Match - Standard | 770 - 772 | 773-775 | - | - |
| Cat Truck Match - High Lift | 773 - 775 | 775-777 | - | 772/773/775 |
| Operating Weight - Standard | - | 178517 lb | - | - |
| Rated Payload - Standard | - | 17.5 ton (US) | - | - |
| Rated Payload - High Lift | - | 17.5 ton (US) | - | - |
| Note (2) | - | - | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. | - |
| Note (1) | - | - | **Aggregate Handler machine equipped with full counterweight and optional guards. | - |
| Full Turn Tip Load (2) | - | - | 9302 kg (20,507 lb)~ | - |
| Full Turn Tip Load (1) | - | - | 9203 kg (20,289 lb)** | - |
Transmission |
||||
| Transmission Type | Cat planetary powershift | Cat planetary power shift | - | Cat planetary power shift |
| Forward - 1 | 4 mile/h | 4.6 mile/h | - | 5 mile/h |
| Forward - 2 | 7.2 mile/h | 8.2 mile/h | - | 8 mile/h |
| Forward - 3 | 12.7 mile/h | 14.5 mile/h | - | - |
| Forward - 4 | 21.6 mile/h | - | - | - |
| Reverse - 1 | 4.7 mile/h | 5.1 mile/h | - | 5 mile/h |
| Reverse - 2 | 8.3 mile/h | 9.1 mile/h | - | 8 mile/h |
| Reverse - 3 | 14.4 mile/h | 16 mile/h | - | - |
| Direct Drive - Forward 1 | Lock-up disabled | Lock-up disabled | - | Lock-up disabled |
| Direct Drive - Forward 2 | 7.8 mile/h | 8.2 mile/h | - | 8 mile/h |
| Direct Drive - Forward 3 | 13.9 mile/h | 14.5 mile/h | - | 14 mile/h |
| Direct Drive - Forward 4 | 24.4 mile/h | - | - | 24 mile/h |
| Direct Drive - Reverse 1 | 5 mile/h | 5.1 mile/h | - | Lock-up disabled |
| Direct Drive - Reverse 2 | 8.9 mile/h | 9.1 mile/h | - | 9 mile/h |
| Direct Drive - Reverse 3 | 15.8 mile/h | 16 mile/h | - | 16 mile/h |
| Note | - | Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. | * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). | - |
| Forward and Reverse - Range 3 | - | - | 17 mile/h | - |
| Forward and Reverse - Range 1* | - | - | 1-13 km/h (0.6-8 mph) | - |
| Forward and Reverse - Range 2 | - | - | 8 mile/h | - |
| Forward and Reverse - Range 4 | - | - | 25 mile/h | - |
| Direct Drive - Reverse 4 | - | - | - | 25.4 mile/h |
Hydraulic System - Lift/Tilt |
||||
| Lift/Tilt System - Circuit | EH- Positive Flow Control, Flow Sharing | Positive flow control | - | EH - Load Sense |
| Lift/Tilt System - Pump | Variable displacement piston | - | - | - |
| Maximum Flow at 1,400-1,860 rpm | 153 gal/min | - | - | - |
| Relief Valve Setting - Lift/Tilt | 4757 psi | 4786 psi | - | 4598 psi |
| Cylinders, Double Acting - Lift, Bore and Stroke | 210 mm × 1050 mm (8.7 in × 41.3 in) | 235 mm × 1287 mm (9.3 in × 50.7 in) | - | 190 mm x 1216 mm (7.5 in x 48 in) |
| Cylinders, Double Acting - Tilt, Bore and Stroke | 266 mm × 685 mm (8.7 in × 27 in) | 292.1 mm × 820 mm (11.5 in × 32.3 in) | - | 170 mm x 722 mm (6.7 in x 28.4 in) |
| Pilot System | Variable displacement piston | Open loop and pressure reducing | - | Variable displacement piston |
| Relief Valve Setting - Main | 551 psi | - | - | - |
| Lift/Tilt System | - | Variable displacement piston | - | 2X x 145 cc Variable displacement piston |
| Maximum Flow at 1,800 rpm | - | 240 gal/min | - | - |
| Pilot Relief Setting | - | 507 psi | - | - |
| Maximum Flow at 2,165 rpm | - | - | - | 159 gal/min |
| Tilt Cylinder - Stroke | - | - | - | 27 in |
Hydraulic Cycle Time (1,400-1,860 rpm) |
||||
| Rack Back | 4.5 s | - | - | - |
| Raise | 8 s | - | - | - |
| Dump | 2.2 s | - | - | - |
| Lower Float Down | 3.5 s | - | - | - |
| Total Hydraulic Cycle Time - Empty Bucket | 18.2 s | - | - | - |
Hydraulic System - Steering |
||||
| Steering System - Circuit | Pilot, load sensing | Pilot, load sensing | - | Pilot, load sensing |
| Steering System - Pump | Piston, variable displacement | Piston, variable displacement | - | Piston, variable displacement |
| Maximum Flow at 1,400-1,600 rpm | 71.3 gal/min | - | - | - |
| Relief Valve Setting - Steering | 4351 psi | 5004 psi | - | 4000 psi |
| Total Steering Angle | 86 ° | 70° | - | 70° |
| Steering Cycle Times - High Idle | 3.4 s | - | - | 3 s |
| Steering Cycle Times - Low Idle | 5.6 s | - | - | 5.2 s |
| Maximum Flow at 1,400 rpm | - | 96.2 gal/min | - | - |
| Maximum Flow | - | - | - | 52 gal (US) |
Air Conditioning System |
||||
| Air Conditioning | • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system | • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co |
Axles |
||||
| Front | Fixed | Fixed | - | Fixed |
| Rear | Trunnion | Trunnion | - | Trunnion |
| Oscillation Angle | 13 ° | 8.5° | - | +/-12.5° |
Brakes |
||||
| Brakes | ISO 3450:2011 | ISO 3450: 2011 | - | ISO 3450:2011 |
Operator's Cab |
||||
| ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | - | - | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
Sound Performance - Tier 4 Final / Stage V |
||||
| Operator Sound Pressure Level (ISO 6396:2008) | 73 dB(A) | 72 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008) | 111 dB(A) | 116 dB(A) | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | 72 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008)** | 109 dB(A) | - | - | - |
| Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” | *Sound suppression equipped | - | - |
| Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - |
| Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - | - |
| Machine Sound Power Level (ISO 6395:2008)* | - | 114 dB(A) | - | - |
Sound Performance - Tier 3 / Stage IIIA |
||||
| Operator Sound Pressure Level (ISO 6396:2008) | 73 dB(A) | - | - | - |
| Machine Sound Power Level (ISO 6395:2008) | 112 dB(A) | - | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | - | - | - |
| Machine Sound Power Level (ISO 6395:2008)** | 110 dB(A) | - | - | - |
| Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” | - | - | - |
| Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. | - | - | - |
| Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - | - | - |
| Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - | - | - |
| Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - | - |
Service Refill Capacities |
||||
| Fuel Tank | 188 gal (US) | 281 gal (US) | 51.5 Gal | 141 gal (US) |
| Cooling System | 31.7 gal (US) | 54.9 gal (US) | 7.9 gal (US) | 27 gal (US) |
| Coolant (Validated by Test Cell Fill Quantities) | 33 gal (US) | - | - | - |
| Crankcase | 15.9 gal (US) | - | - | - |
| Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only) | 8.7 gal (US) | - | - | - |
| Transmission | 24.3 gal (US) | 29.1 gal (US) | - | 20 gal (US) |
| Transmission - Validated by Test Cell Fill Quantities | 29 gal (US) | - | - | - |
| Differential - Final Drives - Front | 49.1 gal (US) | 71.6 gal (US) | - | 49 gal (US) |
| Differential - Final Drives - Rear | 49.1 gal (US) | 68.9 gal (US) | - | 45 gal (US) |
| Hydraulic System Factory Fill | 125.5 gal (US) | 210 gal (US) | - | - |
| Hydraulic System - Tank Only | 63.4 gal (US) | - | - | - |
| Note | • All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester | Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este | - | Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a |
| Engine Crankcase | - | 20 gal (US) | 5.3 gal (US) | 9 gal (US) |
| Hydraulic Tank - Implement and Hydraulic Fan | - | 68.9 gal (US) | - | - |
| Hydraulic Tank - Steering and Braking | - | 34.9 gal (US) | - | - |
| Rear Axles | - | - | 6.6 gal (US) | - |
| Front Axles | - | - | 6.9 gal (US) | - |
| Hydraulic Tank | - | - | 23.8 gal (US) | - |
| Diesel Exhaust Fluid (DEF) Tank | - | - | 5 gal (US) | - |
| Transmission - Gear Box | - | - | 2.2 gal (US) | - |
| Hydraulic System - Including Tank | - | - | 43.6 gal (US) | - |
| Diesel Exhaust Fluid Tank | - | - | - | 5.5 gal (US) |
Dimensions (Approximate) - Standard Lift Linkage |
||||
| Ground to Top of ROPS | 13.8 ft | 17.2 ft | - | - |
| Ground to Top of Exhaust Stacks | 14.8 ft | 16.6 ft | - | - |
| Ground to Top of Hood | 10.9 ft | 12.7 ft | - | - |
| Rear Axle - Centerline to Bumper | 10.5 ft | 12.5 ft | - | - |
| Front Axle Centerline to Bucket Tip | 14 ft | 15.4 ft | - | - |
| Wheel Base | 14.9 ft | 15.1 ft | - | - |
| Maximum Overall Length | 39.3 ft | 42.9 ft | - | - |
| Ground to Lower Hitch Clearance | 1.9 ft | 2 ft | - | - |
| Clearance at Maximum Lift | 11.9 ft | 7.2 ft | - | - |
| B-Pin Height - Maximum Lift | 18 ft | 19.7 ft | - | - |
| Maximum Overall Height - Bucket Raised | 24.5 ft | 27.2 ft | - | - |
| Reach - Maximum Lift | 6.5 ft | 7.2 ft | - | - |
| Ground to Bumper Clearance | - | 3.5 ft | - | - |
| Ground to Center of Front Axle | - | 4.2 ft | - | - |
| Rack Back Angle at Ground Level | - | 40.4° | - | - |
| Rack Back Angle at Carry | - | 48.8° | - | - |
| Rack Angle at Maximum Lift | - | 63.7° | - | - |
| Dump Angle at Maximum Lift | - | 45° | - | - |
| Note | - | Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires. | - | - |
Dimensions (Approximate) - High Lift Linkage |
||||
| Ground to Top of ROPS | 13.8 ft | 17.2 ft | - | - |
| Ground to Top of Exhaust Stacks | 14.8 ft | 16.6 ft | - | - |
| Ground to Top of Hood | 10.9 ft | 12.7 ft | - | - |
| Rear Axle - Centerline to Bumper | 10.5 ft | 12.5 ft | - | - |
| Front Axle Centerline to Bucket Tip | 15.3 ft | 17.8 ft | - | - |
| Wheel Base | 14.9 ft | 15.1 ft | - | - |
| Maximum Overall Length | 40.7 ft | 45.3 ft | - | - |
| Ground to Lower Hitch Clearance | 1.9 ft | 2 ft | - | - |
| Clearance at Maximum Lift | 13.3 ft | 14.8 ft | - | - |
| B-Pin Height - Maximum Lift | 19.3 ft | 21.2 ft | - | - |
| Maximum Overall Height - Bucket Raised | 25.8 ft | 28.7 ft | - | - |
| Reach - Maximum Lift | 6.8 ft | 8.5 ft | - | - |
| Ground to Bumper Clearance | - | 3.5 ft | - | - |
| Ground to Center of Front Axle | - | 4.2 ft | - | - |
| Rack Back Angle at Ground Level | - | 39.9° | - | - |
| Rack Back Angle at Carry | - | 49.3° | - | - |
| Rack Angle at Maximum Lift | - | 60.6° | - | - |
| Dump Angle at Maximum Lift | - | 51° | - | - |
| Note | - | Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires. | - | - |
Hydraulic Cycle Times |
||||
| Rack Back | - | 4.3 s | - | 3.8 s |
| Raise | - | 8.6 s | - | 7.5 s |
| Dump | - | 2.9 s | - | 3 s |
| Lower | - | 3.7 s | - | - |
| Lower Float Down | - | 3.7 s | - | 4.6 s |
| Total Hydraulic Cycle Time - Empty Bucket | - | 13.8 s | - | 18.9 s |
Sound Performance - Tier 2 |
||||
| Operator Sound Pressure Level (ISO 6396:2008) | - | 72 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008) | - | 116 dB(A) | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | - | 72 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008)* | - | 114 dB(A) | - | - |
| Note (1) | - | *Sound suppression equipped | - | - |
| Note (2) | - | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (3) | - | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (4) | - | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - |
Weights |
||||
| Operating Weight | - | - | 31848 lb | - |
| Note (2) | - | - | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. | - |
| Note (1) | - | - | **Aggregate Handler machine equipped with full counterweight and optional guards. | - |
| Operating Weight (1) | - | - | 14 374 kg (31,689 lb)** | - |
| Operating Weight (2) | - | - | 14 446 kg (31,848 lb)~ | - |
Buckets |
||||
| Bucket Capacities | - | - | 2.5-5.0 m3 (3.3-6.5 yd3) | 6.4-7.6 m3 (8.3-10 yd3) |
Cab |
||||
| ROPS | - | - | ISO 3471:2008 | - |
| Declared Sound Levels | - | - | Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)* |
- |
| FOPS | - | - | ISO 3449:2005 LEVEL II | - |
| Note (1) | - | - | * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. | - |
Loader Hydraulic System |
||||
| Lift Cylinder, Double Acting - Rod Diameter | - | - | 2.6 in | - |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | - | - | 42 gal/min | - |
| Maximum Flow - Implement Pump | - | - | 50 gal/min | - |
| Relief Pressure - Tilt Cylinder | - | - | 4061 psi | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) | - | - | 5.1/5.7 seconds | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) | - | - | 1.5/1.7 seconds | - |
| Lift Cylinder, Double Acting - Stroke | - | - | 28.7 in | - |
| Tilt Cylinder, Double Acting - Rod Diameter | - | - | 3.5 in | - |
| Tilt Cylinder, Double Acting - Stroke | - | - | 21.9 in | - |
| Lift Cylinder, Double Acting - Bore Diameter | - | - | 4.7 in | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | - | - | 4061 psi | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | - | - | 3771 psi | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) | - | - | 2.7/2.7 seconds | - |
| Note (2) | - | - | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - |
| Tilt Cylinder, Double Acting - Bore Diameter | - | - | 5.9 in | - |
| Note (1) | - | - | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. | - |
| Maximum Working Pressure - Implement Pump | - | - | 3771 psi | - |
| Note (3) | - | - | * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time | - | - | 9.3/10.1 seconds | - |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | - | - | 50 gal/min | - |
Power Train |
||||
| Brakes - Parking | - | - | Spring applied hydraulically released | - |
| Rear Axle - Traction Aid - Optional | - | - | Limited slip differential | - |
| Front Axle | - | - | Fixed | - |
| Brakes - Service | - | - | Inboard wet disc | - |
| Note (2) | - | - | Offset rims available to meet European roading requirements. | - |
| Front Axle - Traction Aid* | - | - | Locking differential (standard) | - |
| Note (3) | - | - | *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M. | - |
| Note (1) | - | - | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. | - |
| Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 | - | - | ± 10.5 degrees | - |
| Rear Axle | - | - | Oscillating | - |
Steering |
||||
| Maximum Flow - Steering Pump | - | - | 34 gal/min | - |
| Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | - | - | 2.8 s | - |
| Maximum Working Pressure - Steering Pump | - | - | 3500 psi | - |
| Steering Cylinder, Double Acting - Bore Diameter | - | - | 2.8 in | - |
| Steering Cylinder, Double Acting - Rod Diameter | - | - | 1.6 in | - |
| Steering Cylinder, Double Acting - Stroke | - | - | 17.2 in | - |
| Note (1) | - | - | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. | - |
| Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | - | - | 2.4 s | - |
| Note (2) | - | - | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - |
Sustainability |
||||
| Recyclability | - | - | 94% | 96% |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
||||
| Operator Sound Level (ISO 6396) | - | - | - | 72 dB(A) |
| Machine Sound Level (ISO 6395) | - | - | - | 110 dB(A) |
| Note (1) | - | - | - | The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (2) | - | - | - | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Note (3) | - | - | - | The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
Dimensions (Approximate) - High Lift |
||||
| Ground to Top of ROPS | - | - | - | 13.5 ft |
| Ground to Top of Exhaust Stacks | - | - | - | 13.3 ft |
| Ground to Top of Hood | - | - | - | 10.7 ft |
| Rear Axle - Centerline to Bumper | - | - | - | 10.3 ft |
| Front Axle Centerline to Bucket Tip | - | - | - | 15.7 ft |
| Wheel Base | - | - | - | 12.5 ft |
| Maximum Overall Length | - | - | - | 39.5 ft |
| Ground to Lower Hitch Clearance | - | - | - | 1.5 ft |
| Clearance at Maximum Lift | - | - | - | 12 ft |
| B-Pin Height - Maximum Lift | - | - | - | 18.7 ft |
| Maximum Overall Height - Bucket Raised | - | - | - | 25 ft |
| Reach - Maximum Lift | - | - | - | 7.7 ft |
| Note | - | - | - | Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. |
Add a Similar Product:
-
992 Wheel Loader Add
-
995 Wheel Loader Add
-
988 XE Wheel Loader Add
-
986 Wheel Loader Add
-
938M Waste Handler Small Wheel Loader Add
-
950 GC Wheel Loader | Front Loader Add
-
938M Small Wheel Loader Add
-
938M Aggregate Handler Small Wheel Loader Add
-
930M Waste Handler Small Wheel Loader Add
-
930M Small Wheel Loader Add