Compare Equipment Go Back
 988 Wheel Loader |
 990 Wheel Loader |
 930M Aggregate Handler Small Wheel Loader |
 938M Small Wheel Loader |
 992 Wheel Loader |
 930M Ag Handler Small Wheel Loader |
|
Engine |
||||||
|---|---|---|---|---|---|---|
| Engine Power - ISO 14396:2002 | 580 hp | 752 hp | - | - | - | - |
| Engine Model | Cat® C18 | Cat® C27 | Cat® C7.1 | Cat C7.1 ACERT** | Cat® C32B | Cat® C7.1 |
| Rated Speed | 1700/rpm | 1800 r/min | - | - | 1750 rpm | - |
| Peak Power Speed | 1500/rpm | - | - | - | - | - |
| Gross Power - SAE J1995:2014 | 588 hp | 766 hp | - | - | - | - |
| Net Power - SAE J1349:2011 | 538 hp | - | - | - | - | - |
| Bore | 5.7 in | 5.4 in | 4 in | - | 5.7 in | - |
| Stroke | 7.2 in | 6 in | 5 in | - | 6.4 in | - |
| Displacement | 1105 in³ | 1649.5 in³ | 427 in³ | - | 1963.5 in³ | - |
| Peak Torque - 1,200 rpm | 2104 lbf·ft | 2624 lb/ft | - | - | - | - |
| Torque Rise | 58 % | 18 % | - | - | - | - |
| Note (1) | Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio | - | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. | - | *The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards. |
| Note (2) | Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. | - | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. | - | **Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
| Emissions | - | Option 2 - Emits equivalent to U.S. EPA Tier 2 | The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards. | - | U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent | Engine meets U.S. EPA Tier 4 Final emission standards. |
| Net Power - SAE J1349:2011 - Standard Ambient | - | 699 hp | - | - | - | - |
| Net Power - SAE J1349:2011 - High Ambient | - | 648 hp | - | - | - | - |
| Note | - | Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator. | - | - | - | - |
| Maximum Gross Power | - | - | 168 hp | 188 hp | - | 168 hp |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | - | - | 601 ft·lbf | 664 ft·lbf | - | 601 ft·lbf |
| Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) | - | - | 160 hp | - | - | - |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | - | - | 586 ft·lbf | 642 ft·lbf | - | - |
| Note (3) | - | - | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. | **The Cat C7.1 ACERT engine meets Tier 4 Final/Stage V off-highway emission standards. | - | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
| Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) | - | - | 168 hp | - | - | 168 hp |
| Maximum Rated Gross Power - ISO 14396 | - | - | 168 hp | - | - | 168 hp |
| Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | - | - | 588 ft·lbf | 649 ft·lbf | - | - |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | - | - | 573 ft·lbf | 627 ft·lbf | - | - |
| Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | - | - | 1600 r/min | - | - | - |
| Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | - | - | 1800 r/min | - | - | 1800 r/min |
| Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | - | 164 hp | - | - | 164 hp |
| Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | - | 163 hp | - | - | 163 hp |
| Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) | - | - | 170 hp | - | - | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | - | 166 hp | - | - | 166 hp |
| Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) | - | - | 587 ft·lbf | - | - | 587 ft·lbf |
| Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | - | 156 hp | - | - | - |
| Maximum Rated Gross Power - ISO 14396 (metric) | - | - | 170 hp | - | - | 170 mhp |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | - | 158 hp | - | - | - |
| Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*) | - | - | 572 ft·lbf | - | - | - |
| Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) | - | - | 162 hp | - | - | - |
| Net Power (Performance Power Mode: Range 1-4) | - | - | 1800 r/min | - | - | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | - | 156 hp | - | - | - |
| Net Power (Standard Power Mode: Range 1-3*) | - | - | 1600 r/min | - | - | - |
| Displacement (Standard Power Mode: Speed Range 1-3*) | - | - | - | 427 in³ | - | - |
| Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | - | - | - | 1600 r/min | - | - |
| Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | - | - | 183 hp | - | - |
| Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) | - | - | - | 176 mhp | - | - |
| Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4) | - | - | - | 188 hp | - | - |
| Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | - | - | 172 mhp | - | - |
| Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | - | - | 186 mhp | - | - |
| Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | - | - | - | 1800 r/min | - | - |
| Displacement (Performance Power Mode: Speed Range 1-4) | - | - | - | 427 in³ | - | 428 in³ |
| Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) | - | - | - | 190 mhp | - | - |
| Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | - | - | 170 hp | - | - |
| Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*) | - | - | - | 173 hp | - | - |
| Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | - | - | 170 hp | - | - |
| Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) | - | - | - | 628 ft·lbf | - | - |
| Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | - | - | 184 hp | - | - |
| Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) | - | - | - | 650 ft·lbf | - | - |
| Net Power | - | - | - | - | 814 hp | - |
| Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard | - | - | - | - | 900 hp | - |
| Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient | - | - | - | - | 937 hp | - |
| Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard | - | - | - | - | 907 hp | - |
| Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient | - | - | - | - | 944 hp | - |
| Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard | - | - | - | - | 884 hp | - |
| Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient | - | - | - | - | 921 hp | - |
| Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard | - | - | - | - | 893 hp | - |
| Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient | - | - | - | - | 931 hp | - |
| Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard | - | - | - | - | 814 hp | - |
| Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient | - | - | - | - | 814 hp | - |
| Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard | - | - | - | - | 823 hp | - |
| Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient | - | - | - | - | 823 hp | - |
| Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm | - | - | - | - | 3514 ft·lbf | - |
| Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm | - | - | - | - | 3555 ft·lbf | - |
| Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm | - | - | - | - | 3537 ft·lbf | - |
| Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm | - | - | - | - | 3570 ft·lbf | - |
| Stroke - Performance Power Mode: Range 1-4 | - | - | - | - | - | 5.3 in |
| Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) | - | - | - | - | - | 797 N·m |
| Note (4) | - | - | - | - | - | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
| Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) | - | - | - | - | - | 170 hp |
| Bore (Standard Power Mode: Range 1-4) | - | - | - | - | - | 4.1 in |
| Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**) | - | - | - | - | - | 156 hp |
| Stroke (Standard Power Mode: Range 1-3**) | - | - | - | - | - | 5.3 in |
| Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**) | - | - | - | - | - | 156 hp |
| Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**) | - | - | - | - | - | 1600 r/min |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**) | - | - | - | - | - | 158 hp |
| Bore (Standard Power Mode: Range 1-3**) | - | - | - | - | - | 4.1 in |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**) | - | - | - | - | - | 795 N·m |
| Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**) | - | - | - | - | - | 776 N·m |
| Displacement (Standard Power Mode: Range 1-3**) | - | - | - | - | - | 428 in³ |
| Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**) | - | - | - | - | - | 160 hp |
| Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**) | - | - | - | - | - | 162 hp |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**) | - | - | - | - | - | 573 ft·lbf |
Operating Specifications |
||||||
| Operating Weight | 112574 lb | - | - | - | 233430 lb | - |
| Bucket Capacity Range | 4.7-13 m3 (6.2-17 yd3) | 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) | - | - | 11.5-24.5 m³ (15-32 yd³) | - |
| Rated Payload - Quarry Face | 12.5 t | - | - | - | - | - |
| Rated Payload - Loose Material | 16 t | - | - | - | - | - |
| Cat Truck Match - Standard | 770 - 772 | 773-775 | - | - | 775/777 | - |
| Cat Truck Match - High Lift | 773 - 775 | 775-777 | - | - | 785 | - |
| Operating Weight - Standard | - | 178517 lb | - | - | - | - |
| Rated Payload - Standard | - | 17.5 ton (US) | - | - | 25.5 ton (US) | - |
| Rated Payload - High Lift | - | 17.5 ton (US) | - | - | 22.5 ton (US) | - |
| Note (2) | - | - | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. | - | - | - |
| Note (1) | - | - | **Aggregate Handler machine equipped with full counterweight and optional guards. | - | - | - |
| Full Turn Tip Load (2) | - | - | 9302 kg (20,507 lb)~ | - | - | - |
| Full Turn Tip Load (1) | - | - | 9203 kg (20,289 lb)** | - | - | - |
| Rated Payload - Standard (Material Handler) | - | - | - | - | 30 ton (US) | - |
| Rated Payload - High Lift (Material Handler) | - | - | - | - | 27 ton (US) | - |
| Full Turn Tip Load | - | - | - | - | - | 19424 lb |
Transmission |
||||||
| Transmission Type | Cat planetary powershift | Cat planetary power shift | - | - | Cat Planetary Powershift | - |
| Forward - 1 | 4 mile/h | 4.6 mile/h | - | - | 4.3 mile/h | - |
| Forward - 2 | 7.2 mile/h | 8.2 mile/h | - | - | 7.4 mile/h | - |
| Forward - 3 | 12.7 mile/h | 14.5 mile/h | - | - | 12.7 mile/h | - |
| Forward - 4 | 21.6 mile/h | - | - | - | - | - |
| Reverse - 1 | 4.7 mile/h | 5.1 mile/h | - | - | 4.7 mile/h | - |
| Reverse - 2 | 8.3 mile/h | 9.1 mile/h | - | - | 8.1 mile/h | - |
| Reverse - 3 | 14.4 mile/h | 16 mile/h | - | - | 13.9 mile/h | - |
| Direct Drive - Forward 1 | Lock-up disabled | Lock-up disabled | - | - | Disabled | - |
| Direct Drive - Forward 2 | 7.8 mile/h | 8.2 mile/h | - | - | 8 mile/h | - |
| Direct Drive - Forward 3 | 13.9 mile/h | 14.5 mile/h | - | - | 14 mile/h | - |
| Direct Drive - Forward 4 | 24.4 mile/h | - | - | - | - | - |
| Direct Drive - Reverse 1 | 5 mile/h | 5.1 mile/h | - | - | 5 mile/h | - |
| Direct Drive - Reverse 2 | 8.9 mile/h | 9.1 mile/h | - | - | 8.8 mile/h | - |
| Direct Drive - Reverse 3 | 15.8 mile/h | 16 mile/h | - | - | 15.3 mile/h | - |
| Note | - | Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. | * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). | *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph). | - | Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine |
| Forward and Reverse - Range 3 | - | - | 17 mile/h | 17 mile/h | - | - |
| Forward and Reverse - Range 1* | - | - | 1-13 km/h (0.6-8 mph) | 1-13 km/h (0.6-8 mph) | - | - |
| Forward and Reverse - Range 2 | - | - | 8 mile/h | 8 mile/h | - | - |
| Forward and Reverse - Range 4 | - | - | 25 mile/h | 25 mile/h | - | - |
| Reverse - Range 2 | - | - | - | - | - | 8 mile/h |
| Forward - Range 3 | - | - | - | - | - | 17 mile/h |
| Forward - Range 4 | - | - | - | - | - | 25 mile/h |
| Reverse - Range 3 | - | - | - | - | - | 17 mile/h |
| Reverse - Range 1* | - | - | - | - | - | 8 mile/h |
| Forward - Range 2 | - | - | - | - | - | 8 mile/h |
| Forward - Range 1* | - | - | - | - | - | 1-13 km/h (0.6-8 mph) |
| Reverse - Range 4 | - | - | - | - | - | 25 mile/h |
Hydraulic System - Lift/Tilt |
||||||
| Lift/Tilt System - Circuit | EH- Positive Flow Control, Flow Sharing | Positive flow control | - | - | Positive Flow Control | - |
| Lift/Tilt System - Pump | Variable displacement piston | - | - | - | Variable Displacement Piston | - |
| Maximum Flow at 1,400-1,860 rpm | 153 gal/min | - | - | - | - | - |
| Relief Valve Setting - Lift/Tilt | 4757 psi | 4786 psi | - | - | 5000 psi | - |
| Cylinders, Double Acting - Lift, Bore and Stroke | 210 mm × 1050 mm (8.7 in × 41.3 in) | 235 mm × 1287 mm (9.3 in × 50.7 in) | - | - | - | - |
| Cylinders, Double Acting - Tilt, Bore and Stroke | 266 mm × 685 mm (8.7 in × 27 in) | 292.1 mm × 820 mm (11.5 in × 32.3 in) | - | - | - | - |
| Pilot System | Variable displacement piston | Open loop and pressure reducing | - | - | - | - |
| Relief Valve Setting - Main | 551 psi | - | - | - | - | - |
| Lift/Tilt System | - | Variable displacement piston | - | - | - | - |
| Maximum Flow at 1,800 rpm | - | 240 gal/min | - | - | - | - |
| Pilot Relief Setting | - | 507 psi | - | - | - | - |
| Maximum Flow at 2,165 rpm | - | - | - | - | 250 gal/min | - |
| Lift Cylinder - Bore | - | - | - | - | 9.3 in | - |
| Lift Cylinder - Stroke | - | - | - | - | 63.5 in | - |
| Tilt Cylinder - Bore | - | - | - | - | 11.5 in | - |
| Tilt Cylinder - Stroke | - | - | - | - | 41.5 in | - |
Hydraulic Cycle Time (1,400-1,860 rpm) |
||||||
| Rack Back | 4.5 s | - | - | - | - | - |
| Raise | 8 s | - | - | - | - | - |
| Dump | 2.2 s | - | - | - | - | - |
| Lower Float Down | 3.5 s | - | - | - | - | - |
| Total Hydraulic Cycle Time - Empty Bucket | 18.2 s | - | - | - | - | - |
Hydraulic System - Steering |
||||||
| Steering System - Circuit | Pilot, load sensing | Pilot, load sensing | - | - | Pilot, Load Sensing | - |
| Steering System - Pump | Piston, variable displacement | Piston, variable displacement | - | - | Piston, Variable Displacement | - |
| Maximum Flow at 1,400-1,600 rpm | 71.3 gal/min | - | - | - | - | - |
| Relief Valve Setting - Steering | 4351 psi | 5004 psi | - | - | - | - |
| Total Steering Angle | 86 ° | 70° | - | - | 80° | - |
| Steering Cycle Times - High Idle | 3.4 s | - | - | - | 3.1 s | - |
| Steering Cycle Times - Low Idle | 5.6 s | - | - | - | 4.9 s | - |
| Maximum Flow at 1,400 rpm | - | 96.2 gal/min | - | - | - | - |
| Maximum Flow at 1,400-1,850 rpm | - | - | - | - | 70 gal/min | - |
| Steering Cut Off Pressure | - | - | - | - | 4500 psi | - |
Air Conditioning System |
||||||
| Air Conditioning | • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system | • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. |
Axles |
||||||
| Front | Fixed | Fixed | - | Fixed; Locking differential (standard) | Fixed | Fixed; Locking differential (standard) |
| Rear | Trunnion | Trunnion | - | Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional) | Trunnion | Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional) |
| Oscillation Angle | 13 ° | 8.5° | - | - | ±9° | - |
Brakes |
||||||
| Brakes | ISO 3450:2011 | ISO 3450: 2011 | - | - | ISO 3450:2011 | - |
Operator's Cab |
||||||
| ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | - | - | - | - | - |
Sound Performance - Tier 4 Final / Stage V |
||||||
| Operator Sound Pressure Level (ISO 6396:2008) | 73 dB(A) | 72 dB(A) | - | - | - | - |
| Machine Sound Power Level (ISO 6395:2008) | 111 dB(A) | 116 dB(A) | - | - | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | 72 dB(A) | - | - | - | - |
| Machine Sound Power Level (ISO 6395:2008)** | 109 dB(A) | - | - | - | - | - |
| Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” | *Sound suppression equipped | - | - | - | - |
| Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - | - | - |
| Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - | - | - |
| Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - | - | - |
| Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - | - | - | - |
| Machine Sound Power Level (ISO 6395:2008)* | - | 114 dB(A) | - | - | - | - |
Sound Performance - Tier 3 / Stage IIIA |
||||||
| Operator Sound Pressure Level (ISO 6396:2008) | 73 dB(A) | - | - | - | - | - |
| Machine Sound Power Level (ISO 6395:2008) | 112 dB(A) | - | - | - | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | - | - | - | - | - |
| Machine Sound Power Level (ISO 6395:2008)** | 110 dB(A) | - | - | - | - | - |
| Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” | - | - | - | - | - |
| Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. | - | - | - | - | - |
| Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - | - | - | - | - |
| Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - | - | - | - | - |
| Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - | - | - | - |
Service Refill Capacities |
||||||
| Fuel Tank | 188 gal (US) | 281 gal (US) | 51.5 Gal | 51.5 gal (US) | 385.7 gal (US) | 51.5 gal (US) |
| Cooling System | 31.7 gal (US) | 54.9 gal (US) | 7.9 gal (US) | 7.9 gal (US) | - | 7.9 gal (US) |
| Coolant (Validated by Test Cell Fill Quantities) | 33 gal (US) | - | - | - | - | - |
| Crankcase | 15.9 gal (US) | - | - | - | 31.7 gal (US) | - |
| Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only) | 8.7 gal (US) | - | - | - | - | - |
| Transmission | 24.3 gal (US) | 29.1 gal (US) | - | - | 51.5 gal (US) | - |
| Transmission - Validated by Test Cell Fill Quantities | 29 gal (US) | - | - | - | - | - |
| Differential - Final Drives - Front | 49.1 gal (US) | 71.6 gal (US) | - | - | 96.4 gal (US) | - |
| Differential - Final Drives - Rear | 49.1 gal (US) | 68.9 gal (US) | - | - | 96.4 gal (US) | - |
| Hydraulic System Factory Fill | 125.5 gal (US) | 210 gal (US) | - | - | - | - |
| Hydraulic System - Tank Only | 63.4 gal (US) | - | - | - | - | - |
| Note | • All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester | Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este | - | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. | - | - |
| Engine Crankcase | - | 20 gal (US) | 5.3 gal (US) | 5.3 gal (US) | - | 5.3 gal (US) |
| Hydraulic Tank - Implement and Hydraulic Fan | - | 68.9 gal (US) | - | - | - | - |
| Hydraulic Tank - Steering and Braking | - | 34.9 gal (US) | - | - | - | - |
| Rear Axles | - | - | 6.6 gal (US) | 9.2 gal (US) | - | - |
| Front Axles | - | - | 6.9 gal (US) | 9.2 gal (US) | - | - |
| Hydraulic Tank | - | - | 23.8 gal (US) | 23.8 gal (US) | - | 23.8 gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | - | - | 5 gal (US) | 5 gal (US) | - | 5 gal (US) |
| Transmission - Gear Box | - | - | 2.2 gal (US) | 2.9 gal (US) | - | 2.2 gal (US) |
| Hydraulic System - Including Tank | - | - | 43.6 gal (US) | 44.9 gal (US) | - | 43.6 gal (US) |
| Cooling Systems | - | - | - | - | 59.4 gal (US) | - |
| Hydraulic System Factory Fill (Implement) | - | - | - | - | 104.1 gal (US) | - |
| Hydraulic Tank - Implement | - | - | - | - | 60.2 gal (US) | - |
| Hydraulic Factory Fill (Steering) | - | - | - | - | 32.5 gal (US) | - |
| Hydraulic Tank (Steering Tank Only) | - | - | - | - | 26.3 gal (US) | - |
| Axles - Front | - | - | - | - | - | 6.9 gal (US) |
| Axles - Rear | - | - | - | - | - | 6.6 gal (US) |
Dimensions (Approximate) - Standard Lift Linkage |
||||||
| Ground to Top of ROPS | 13.8 ft | 17.2 ft | - | - | - | - |
| Ground to Top of Exhaust Stacks | 14.8 ft | 16.6 ft | - | - | - | - |
| Ground to Top of Hood | 10.9 ft | 12.7 ft | - | - | - | - |
| Rear Axle - Centerline to Bumper | 10.5 ft | 12.5 ft | - | - | - | - |
| Front Axle Centerline to Bucket Tip | 14 ft | 15.4 ft | - | - | - | - |
| Wheel Base | 14.9 ft | 15.1 ft | - | - | - | - |
| Maximum Overall Length | 39.3 ft | 42.9 ft | - | - | - | - |
| Ground to Lower Hitch Clearance | 1.9 ft | 2 ft | - | - | - | - |
| Clearance at Maximum Lift | 11.9 ft | 7.2 ft | - | - | - | - |
| B-Pin Height - Maximum Lift | 18 ft | 19.7 ft | - | - | - | - |
| Maximum Overall Height - Bucket Raised | 24.5 ft | 27.2 ft | - | - | - | - |
| Reach - Maximum Lift | 6.5 ft | 7.2 ft | - | - | - | - |
| Ground to Bumper Clearance | - | 3.5 ft | - | - | - | - |
| Ground to Center of Front Axle | - | 4.2 ft | - | - | - | - |
| Rack Back Angle at Ground Level | - | 40.4° | - | - | - | - |
| Rack Back Angle at Carry | - | 48.8° | - | - | - | - |
| Rack Angle at Maximum Lift | - | 63.7° | - | - | - | - |
| Dump Angle at Maximum Lift | - | 45° | - | - | - | - |
| Note | - | Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires. | - | - | - | - |
Dimensions (Approximate) - High Lift Linkage |
||||||
| Ground to Top of ROPS | 13.8 ft | 17.2 ft | - | - | - | - |
| Ground to Top of Exhaust Stacks | 14.8 ft | 16.6 ft | - | - | - | - |
| Ground to Top of Hood | 10.9 ft | 12.7 ft | - | - | - | - |
| Rear Axle - Centerline to Bumper | 10.5 ft | 12.5 ft | - | - | - | - |
| Front Axle Centerline to Bucket Tip | 15.3 ft | 17.8 ft | - | - | - | - |
| Wheel Base | 14.9 ft | 15.1 ft | - | - | - | - |
| Maximum Overall Length | 40.7 ft | 45.3 ft | - | - | - | - |
| Ground to Lower Hitch Clearance | 1.9 ft | 2 ft | - | - | - | - |
| Clearance at Maximum Lift | 13.3 ft | 14.8 ft | - | - | - | - |
| B-Pin Height - Maximum Lift | 19.3 ft | 21.2 ft | - | - | - | - |
| Maximum Overall Height - Bucket Raised | 25.8 ft | 28.7 ft | - | - | - | - |
| Reach - Maximum Lift | 6.8 ft | 8.5 ft | - | - | - | - |
| Ground to Bumper Clearance | - | 3.5 ft | - | - | - | - |
| Ground to Center of Front Axle | - | 4.2 ft | - | - | - | - |
| Rack Back Angle at Ground Level | - | 39.9° | - | - | - | - |
| Rack Back Angle at Carry | - | 49.3° | - | - | - | - |
| Rack Angle at Maximum Lift | - | 60.6° | - | - | - | - |
| Dump Angle at Maximum Lift | - | 51° | - | - | - | - |
| Note | - | Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires. | - | - | - | - |
Hydraulic Cycle Times |
||||||
| Rack Back | - | 4.3 s | - | - | 2.3 s | - |
| Raise | - | 8.6 s | - | - | 9 s | - |
| Dump | - | 2.9 s | - | - | 2.6 s | - |
| Lower | - | 3.7 s | - | - | - | - |
| Lower Float Down | - | 3.7 s | - | - | - | - |
| Total Hydraulic Cycle Time - Empty Bucket | - | 13.8 s | - | - | - | - |
| Rack Back - High Lift | - | - | - | - | 2.3 s | - |
| Raise - High Lift | - | - | - | - | 9 s | - |
| Dump - High Lift | - | - | - | - | 2.6 s | - |
| Float Down | - | - | - | - | 3.2 s | - |
| Float Down - High Lift | - | - | - | - | 3.2 s | - |
| Total Hydraulic Cycle Time | - | - | - | - | 17.1 s | - |
Sound Performance - Tier 2 |
||||||
| Operator Sound Pressure Level (ISO 6396:2008) | - | 72 dB(A) | - | - | - | - |
| Machine Sound Power Level (ISO 6395:2008) | - | 116 dB(A) | - | - | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | - | 72 dB(A) | - | - | - | - |
| Machine Sound Power Level (ISO 6395:2008)* | - | 114 dB(A) | - | - | - | - |
| Note (1) | - | *Sound suppression equipped | - | - | - | - |
| Note (2) | - | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - | - | - |
| Note (3) | - | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - | - | - |
| Note (4) | - | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - | - | - |
Weights |
||||||
| Operating Weight | - | - | 31848 lb | 35778 lb | - | 31382 lb |
| Note (2) | - | - | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. | - | - | - |
| Note (1) | - | - | **Aggregate Handler machine equipped with full counterweight and optional guards. | - | - | - |
| Operating Weight (1) | - | - | 14 374 kg (31,689 lb)** | - | - | - |
| Operating Weight (2) | - | - | 14 446 kg (31,848 lb)~ | - | - | - |
Buckets |
||||||
| Bucket Capacities | - | - | 2.5-5.0 m3 (3.3-6.5 yd3) | 2.5-5.0 m3 (3.2-6.5 yd3) | 11.5-24.5 m³ (15-32 yd³) | 2.1-5.0 m³ (2.7-6.5 yd³) |
| Bucket Capacities - Light Material | - | - | - | 3.1-5.0 m³ (4.0-6.5 yd³) | - | 3.1-5.0 m³ (4.0-6.5 yd³) |
| Bucket Capacities - General Purpose | - | - | - | 2.5-3.2 m³ (3.2-4.2 yd³) | - | - |
Cab |
||||||
| ROPS | - | - | ISO 3471:2008 | ISO 3471:2008 | - | ISO 3471:2008 |
| Declared Sound Levels | - | - | Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)* |
- | - | - |
| FOPS | - | - | ISO 3449:2005 LEVEL II | ISO 3449:2008 Level II | - | ISO 3449:2005 Level II |
| Note (1) | - | - | * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | - | *The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab |
| Note (3) | - | - | - | *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. | - | - |
| Note (2) | - | - | - | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A) |
- | - |
| Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* | - | - | - | - | - | 101 dB(A) |
| Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* | - | - | - | - | - | 68 dB(A) |
Loader Hydraulic System |
||||||
| Lift Cylinder, Double Acting - Rod Diameter | - | - | 2.6 in | - | - | - |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | - | - | 42 gal/min | 42 gal/min | - | 42 gal/min |
| Maximum Flow - Implement Pump | - | - | 50 gal/min | 50 gal/min | - | 50 gal/min |
| Relief Pressure - Tilt Cylinder | - | - | 4061 psi | 4351 psi | - | 4351 psi |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) | - | - | 5.1/5.7 seconds | - | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) | - | - | 1.5/1.7 seconds | - | - | - |
| Lift Cylinder, Double Acting - Stroke | - | - | 28.7 in | - | - | - |
| Tilt Cylinder, Double Acting - Rod Diameter | - | - | 3.5 in | - | - | - |
| Tilt Cylinder, Double Acting - Stroke | - | - | 21.9 in | - | - | - |
| Lift Cylinder, Double Acting - Bore Diameter | - | - | 4.7 in | - | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | - | - | 4061 psi | 4351 psi | - | 4351 psi |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | - | - | 3771 psi | 4061 psi | - | 4061 psi |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) | - | - | 2.7/2.7 seconds | - | - | - |
| Note (2) | - | - | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - | - | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
| Tilt Cylinder, Double Acting - Bore Diameter | - | - | 5.9 in | - | - | - |
| Note (1) | - | - | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. | *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped. | - | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. |
| Maximum Working Pressure - Implement Pump | - | - | 3771 psi | 4061 psi | - | 4061 psi |
| Note (3) | - | - | * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. | - | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time | - | - | 9.3/10.1 seconds | - | - | - |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | - | - | 50 gal/min | 50 gal/min | - | 50 gal/min |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift | - | - | - | 5.5 s | - | - |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time | - | - | - | 9.7 s | - | - |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time | - | - | - | 10.6 s | - | - |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height | - | - | - | 1.7 s | - | - |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height | - | - | - | 1.5 s | - | - |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift | - | - | - | 6.2 s | - | - |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level | - | - | - | 2.7 s | - | - |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level | - | - | - | 2.7 s | - | - |
| Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height) | - | - | - | - | - | 1.7 s |
| Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift) | - | - | - | - | - | 5.7 s |
| Lift Cylinder: Standard Lift Linkage - Bore Diameter | - | - | - | - | - | 4.3 in |
| Tilt Cylinder: Standard Lift Linkage - Stroke | - | - | - | - | - | 21.9 in |
| Tilt Cylinder: Standard Lift Linkage - Rod Diameter | - | - | - | - | - | 2.8 in |
| Lift Cylinder: Standard Lift Linkage - Rod Diameter | - | - | - | - | - | 2.4 in |
| Tilt Cylinder: Standard Lift Linkage - Bore Diameter | - | - | - | - | - | 5.1 in |
| Lift Cylinder: Standard Lift Linkage - Stroke | - | - | - | - | - | 28.7 in |
| Cycle Times - 1,600 rpm - Standard: Total Cycle Time | - | - | - | - | - | 10.1 s |
| Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height) | - | - | - | - | - | 1.5 s |
| Note | - | - | - | - | - | *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display. |
| Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time | - | - | - | - | - | 9.3 s |
| Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level) | - | - | - | - | - | 2.7 s |
| Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift) | - | - | - | - | - | 5.1 s |
| Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level) | - | - | - | - | - | 2.7 s |
Power Train |
||||||
| Brakes - Parking | - | - | Spring applied hydraulically released | - | - | Spring applied hydraulically released |
| Rear Axle - Traction Aid - Optional | - | - | Limited slip differential | - | - | - |
| Front Axle | - | - | Fixed | - | - | Fixed |
| Brakes - Service | - | - | Inboard wet disc | - | - | Inboard wet disc |
| Note (2) | - | - | Offset rims available to meet European roading requirements. | - | - | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. |
| Front Axle - Traction Aid* | - | - | Locking differential (standard) | - | - | Locking differential standard |
| Note (3) | - | - | *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M. | - | - | - |
| Note (1) | - | - | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. | - | - | - |
| Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 | - | - | ± 10.5 degrees | - | - | - |
| Rear Axle | - | - | Oscillating | - | - | Oscillating |
| Rear Axle - Oscillation Angle by Tire Size - 20.5 R25 | - | - | - | - | - | ± 10.5 degrees |
| Rear Axle - Traction Aid | - | - | - | - | - | Limited slip differential optional |
| Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65 | - | - | - | - | - | ± 7 degrees |
| Note | - | - | - | - | - | *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph). |
Steering |
||||||
| Maximum Flow - Steering Pump | - | - | 34 gal/min | 34 gal/min | - | 34 gal/min |
| Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | - | - | 2.8 s | - | - | 2.8 s |
| Maximum Working Pressure - Steering Pump | - | - | 3500 psi | 3500 psi | - | 3500 psi |
| Steering Cylinder, Double Acting - Bore Diameter | - | - | 2.8 in | - | - | 2.8 in |
| Steering Cylinder, Double Acting - Rod Diameter | - | - | 1.6 in | - | - | 1.6 in |
| Steering Cylinder, Double Acting - Stroke | - | - | 17.2 in | - | - | 17.2 in |
| Note (1) | - | - | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. | - | - | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. |
| Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | - | - | 2.4 s | - | - | 2.4 s |
| Note (2) | - | - | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - | - | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
| Steering Articulation Angle - Each Direction | - | - | - | 40° | - | 40° |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | - | - | - | 3.3 turns | - | 3.5 turns |
| Maximum Steering Torque - 0° (Straight Machine) | - | - | - | 42506 ft·lbf | - | - |
| Maximum Steering Torque - 40° (Full Turn) | - | - | - | 31398 ft·lbf | - | - |
| Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed | - | - | - | 2.3 s | - | - |
Sustainability |
||||||
| Recyclability | - | - | 94% | 94% | - | 94% |
Sound |
||||||
| Average Exterior Sound Pressure (ISO 6395:2008) | - | - | - | 101 dB(A) | - | - |
| Operator Sound Pressure (ISO 6396:2008) | - | - | - | 72 dB(A) | - | - |
| Note (1) | - | - | - | European Union Directive “2000/14/EC” | - | - |
Tires |
||||||
| Note (1) | - | - | - | Other tire choices are available. Contact your Cat dealer for details. | - | Other tire choices are available. Contact your Cat dealer for details. |
| Standard Size | - | - | - | 20.5 R25, radial (L-3) | - | 20.5 R25, radial (L-3) |
| Note (2) | - | - | - | In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. | - | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Other Choices Include | - | - | - | 20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 23.5 R25, radial (L-3); 650/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires | - | 20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX |
| Note (3) | - | - | - | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. | - | - |
Cooling System |
||||||
| Ambient Capability Hydraulically Driven Demand Fan - Standard | - | - | - | - | 109.4 °F | - |
| Ambient Capability, Hydraulically Driven Demand Fan - High | - | - | - | - | 131 °F | - |
Sound Performance - Standard |
||||||
| Note | - | - | - | - | Machine Sound Level (ISO 6396:2008) - 116 dB(A) | - |
Sound Performance - Suppression |
||||||
| Note | - | - | - | - | Machine Sound Level (ISO 6396:2008) - 113 dB(A) | - |
Dimensions - Standard Lift - Approximate |
||||||
| Ground to Top of Exhaust Stacks | - | - | - | - | 17 ft | - |
| Ground to Top of ROPS | - | - | - | - | 18.3 ft | - |
| Ground to Top of Hood | - | - | - | - | 13.1 ft | - |
| Ground to Center of Front Axle | - | - | - | - | 4.3 ft | - |
| Ground to Bumper Clearance | - | - | - | - | 3.8 ft | - |
| Ground to Lower Hitch Clearance | - | - | - | - | 2.2 ft | - |
| Reach - Maximum Lift | - | - | - | - | 8.2 ft | - |
| Clearance at Maximum Lift | - | - | - | - | 15.2 ft | - |
| B-Pin Height - Maximum Lift | - | - | - | - | 22.8 ft | - |
| Maximum Overall Height - Bucket Raised | - | - | - | - | 30.8 ft | - |
| Rear Axle - Centerline to Bumper | - | - | - | - | 13.5 ft | - |
| Tread Width | - | - | - | - | 10.83 ft | - |
| Rack Back Angle - Maximum Lift | - | - | - | - | 56.9 degrees | - |
| Dump Angle at Maximum Lift | - | - | - | - | -49.5 degrees | - |
| Rack Back Angle - Ground Level | - | - | - | - | 40.2 degrees | - |
| Width - Over Tires - With Bulge | - | - | - | - | 14.74 ft | - |
| Rack Back Angle - Carry | - | - | - | - | 48.9 degrees | - |
| Wheel Base | - | - | - | - | 19.3 ft | - |
| Maximum Overall Length | - | - | - | - | 50.8 ft | - |
| Front Axle Centerline to Bucket Tip | - | - | - | - | 18 ft | - |
Dimensions - High Lift - Approximate |
||||||
| Tread Width | - | - | - | - | 10.83 ft | - |
| Rack Back Angle - Ground Level | - | - | - | - | 42.5 degrees | - |
| Dump Angle at Maximum Lift | - | - | - | - | -48.1 degrees | - |
| Rack Back Angle - Maximum Lift | - | - | - | - | 56.2 degrees | - |
| Width - Over Tires - With Bulge | - | - | - | - | 14.75 ft | - |
| Rack Back Angle - Carry | - | - | - | - | 51.6 degrees | - |
| Ground to Top of Exhaust Stacks | - | - | - | - | 17 ft | - |
| Ground to Top of ROPS | - | - | - | - | 18.3 ft | - |
| Ground to Top of Hood | - | - | - | - | 13.1 ft | - |
| Ground to Center of Front Axle | - | - | - | - | 4.3 ft | - |
| Ground to Bumper Clearance | - | - | - | - | 3.8 ft | - |
| Ground to Lower Hitch Clearance | - | - | - | - | 2.2 ft | - |
| Reach - Maximum Lift | - | - | - | - | 7.6 ft | - |
| Clearance at Maximum Lift | - | - | - | - | 17.2 ft | - |
| B-Pin Height - Maximum Lift | - | - | - | - | 24.5 ft | - |
| Maximum Overall Height - Bucket Raised | - | - | - | - | 32 ft | - |
| Rear Axle - Centerline to Bumper | - | - | - | - | 13.5 ft | - |
| Wheel Base | - | - | - | - | 19.3 ft | - |
| Maximum Overall Length | - | - | - | - | 51.6 ft | - |
| Front Axle Centerline to Bucket Tip | - | - | - | - | 18.8 ft | - |
Dimensions with Bucket - Standard Lift |
||||||
| Height - Ground Clearance** | - | - | - | - | - | 1.3 ft |
| Rack Angle at Carry | - | - | - | - | - | 43 ° |
| Departure Angle | - | - | - | - | - | 33 ° |
| Length - Wheel Base | - | - | - | - | - | 9.8 ft |
| Length - Rear Axle to Bumper | - | - | - | - | - | 6.5 ft |
| Turning Radius - Over Bucket | - | - | - | - | - | 19.5 ft |
| Carry Height - Bucket Pin | - | - | - | - | - | 1.3 ft |
| Width - Over Tires | - | - | - | - | - | 8.3 ft |
| Note (2) | - | - | - | - | - | **Vary with tire. |
| Dig Depth** | - | - | - | - | - | 3.9 in |
| Turning Radius - Outside of Tires | - | - | - | - | - | 17.7 ft |
| Clearance - Level Bucket** | - | - | - | - | - | 11.75 ft |
| Clearance - Bucket at 45°* | - | - | - | - | - | 9.1 ft |
| Rack Angle at Full Lift | - | - | - | - | - | 54 ° |
| Height - Overall** | - | - | - | - | - | 17.1 ft |
| Width - Bucket | - | - | - | - | - | 8.4 ft |
| Height - Ground to Axle Center** | - | - | - | - | - | 2.25 ft |
| Height - Bucket Pin** | - | - | - | - | - | 12.8 ft |
| Operating Weight | - | - | - | - | - | 31125 lb |
| Width - Tread Center | - | - | - | - | - | 6.3 ft |
| Turning Radius - Inside of Tires | - | - | - | - | - | 9.4 ft |
| Reach - Bucket at 45°* | - | - | - | - | - | 3.6 ft |
| Length - Overall* | - | - | - | - | - | 24.9 ft |
| Clearance - Load over Height** | - | - | - | - | - | 10.9 ft |
| Length - Hitch to Front Axle | - | - | - | - | - | 4.9 ft |
| Height - Ground to Beacon** | - | - | - | - | - | 12.2 ft |
| Articulation Angle | - | - | - | - | - | 40 ° |
| Height - Ground to Cab** | - | - | - | - | - | 10.9 ft |
| Note (3) | - | - | - | - | - | Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires. |
| Note (1) | - | - | - | - | - | *Vary with bucket. |
| Dump Angle at Full Lift | - | - | - | - | - | 48 ° |
Dimensions with Bucket - High Lift |
||||||
| Length - Rear Axle to Bumper | - | - | - | - | - | 6.5 ft |
| Departure Angle | - | - | - | - | - | 33 ° |
| Height - Overall** | - | - | - | - | - | 18.7 ft |
| Reach - Bucket at 45°* | - | - | - | - | - | 4.4 ft |
| Dump Angle at Full Lift | - | - | - | - | - | 48 ° |
| Width - Bucket | - | - | - | - | - | 8.4 ft |
| Length - Wheel Base | - | - | - | - | - | 9.8 ft |
| Width - Tread Center | - | - | - | - | - | 6.3 ft |
| Length - Hitch to Front Axle | - | - | - | - | - | 4.9 ft |
| Height - Ground to Axle Center** | - | - | - | - | - | 2.25 ft |
| Note (1) | - | - | - | - | - | *Vary with bucket. |
| Clearance - Bucket at 45°* | - | - | - | - | - | 10.7 ft |
| Height - Bucket Pin** | - | - | - | - | - | 14.4 ft |
| Height - Ground to Beacon** | - | - | - | - | - | 12.2 ft |
| Carry Height - Bucket Pin | - | - | - | - | - | 1.9 ft |
| Clearance - Load over Height** | - | - | - | - | - | 11.6 ft |
| Turning Radius - Outside of Tires | - | - | - | - | - | 17.7 ft |
| Turning Radius - Over Bucket | - | - | - | - | - | 20.6 ft |
| Rack Angle at Full Lift | - | - | - | - | - | 51 ° |
| Rack Angle at Carry | - | - | - | - | - | 47 ° |
| Length - Overall* | - | - | - | - | - | 27 ft |
| Note (2) | - | - | - | - | - | **Vary with tire. |
| Height - Ground to Cab** | - | - | - | - | - | 10.9 ft |
| Turning Radius - Inside of Tires | - | - | - | - | - | 9.4 ft |
| Clearance - Level Bucket** | - | - | - | - | - | 13.4 ft |
| Width - Over Tires | - | - | - | - | - | 8.3 ft |
| Note (3) | - | - | - | - | - | Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires. |
| Dig Depth** | - | - | - | - | - | 5.3 in |
| Articulation Angle | - | - | - | - | - | 40 ° |
| Operating Weight | - | - | - | - | - | 31441 lb |
| Height - Ground Clearance** | - | - | - | - | - | 1.3 ft |
Add a Similar Product:
-
995 Wheel Loader Add
-
988 GC Wheel Loader Add
-
988 XE Wheel Loader Add
-
986 Wheel Loader Add
-
938M Waste Handler Small Wheel Loader Add
-
950 GC Wheel Loader | Front Loader Add
-
938M Aggregate Handler Small Wheel Loader Add
-
930M Waste Handler Small Wheel Loader Add
-
930M Small Wheel Loader Add
-
926M Small Wheel Loader Add