Compare Equipment Go Back
 988 Wheel Loader |
 990 Wheel Loader |
 930M Aggregate Handler Small Wheel Loader |
 930M Waste Handler Small Wheel Loader |
|
Engine |
||||
|---|---|---|---|---|
| Engine Power - ISO 14396:2002 | 580 hp | 752 hp | - | 168 hp |
| Engine Model | Cat® C18 | Cat® C27 | Cat® C7.1 | Cat® C7.1 |
| Rated Speed | 1700/rpm | 1800 r/min | - | - |
| Peak Power Speed | 1500/rpm | - | - | - |
| Gross Power - SAE J1995:2014 | 588 hp | 766 hp | - | - |
| Net Power - SAE J1349:2011 | 538 hp | - | - | - |
| Bore | 5.7 in | 5.4 in | 4 in | 4 in |
| Stroke | 7.2 in | 6 in | 5 in | 5 in |
| Displacement | 1105 in³ | 1649.5 in³ | 427 in³ | 427 in³ |
| Peak Torque - 1,200 rpm | 2104 lbf·ft | 2624 lb/ft | - | - |
| Torque Rise | 58 % | 18 % | - | - |
| Note (1) | Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio | - | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
| Note (2) | Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. | - | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
| Emissions | - | Option 2 - Emits equivalent to U.S. EPA Tier 2 | The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards. | The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards. |
| Net Power - SAE J1349:2011 - Standard Ambient | - | 699 hp | - | - |
| Net Power - SAE J1349:2011 - High Ambient | - | 648 hp | - | - |
| Note | - | Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator. | - | - |
| Maximum Gross Power | - | - | 168 hp | 168 hp |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | - | - | 601 ft·lbf | 601 ft·lbf |
| Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) | - | - | 160 hp | 160 hp |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | - | - | 586 ft·lbf | 586 ft·lbf |
| Note (3) | - | - | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
| Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) | - | - | 168 hp | 168 hp |
| Maximum Rated Gross Power - ISO 14396 | - | - | 168 hp | - |
| Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | - | - | 588 ft·lbf | - |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | - | - | 573 ft·lbf | 573 ft·lbf |
| Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | - | - | 1600 r/min | 1600 r/min |
| Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | - | - | 1800 r/min | 1800 r/min |
| Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | - | 164 hp | 164 hp |
| Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | - | 163 hp | 163 hp |
| Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) | - | - | 170 hp | 170 hp |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | - | 166 hp | 166 hp |
| Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) | - | - | 587 ft·lbf | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | - | 156 hp | 156 hp |
| Maximum Rated Gross Power - ISO 14396 (metric) | - | - | 170 hp | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | - | 158 hp | 158 hp |
| Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*) | - | - | 572 ft·lbf | - |
| Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) | - | - | 162 hp | 162 hp |
| Net Power (Performance Power Mode: Range 1-4) | - | - | 1800 r/min | 1800 r/min |
| Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | - | 156 hp | 156 hp |
| Net Power (Standard Power Mode: Range 1-3*) | - | - | 1600 r/min | 1600 r/min |
| Engine Power - ISO 14396 - Metric | - | - | - | 170 hp |
| Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) | - | - | - | 588 ft·lbf |
| Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) | - | - | - | 572 ft·lbf |
| Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) | - | - | - | 587 ft·lbf |
Operating Specifications |
||||
| Operating Weight | 112574 lb | - | - | - |
| Bucket Capacity Range | 4.7-13 m3 (6.2-17 yd3) | 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) | - | - |
| Rated Payload - Quarry Face | 12.5 t | - | - | - |
| Rated Payload - Loose Material | 16 t | - | - | - |
| Cat Truck Match - Standard | 770 - 772 | 773-775 | - | - |
| Cat Truck Match - High Lift | 773 - 775 | 775-777 | - | - |
| Operating Weight - Standard | - | 178517 lb | - | - |
| Rated Payload - Standard | - | 17.5 ton (US) | - | - |
| Rated Payload - High Lift | - | 17.5 ton (US) | - | - |
| Note (2) | - | - | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. | ^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires. |
| Note (1) | - | - | **Aggregate Handler machine equipped with full counterweight and optional guards. | **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires. |
| Full Turn Tip Load (2) | - | - | 9302 kg (20,507 lb)~ | 9525 kg (20,998 lb)^ |
| Full Turn Tip Load (1) | - | - | 9203 kg (20,289 lb)** | 8573 kg (18,900 lb)** |
Transmission |
||||
| Transmission Type | Cat planetary powershift | Cat planetary power shift | - | - |
| Forward - 1 | 4 mile/h | 4.6 mile/h | - | - |
| Forward - 2 | 7.2 mile/h | 8.2 mile/h | - | - |
| Forward - 3 | 12.7 mile/h | 14.5 mile/h | - | - |
| Forward - 4 | 21.6 mile/h | - | - | - |
| Reverse - 1 | 4.7 mile/h | 5.1 mile/h | - | - |
| Reverse - 2 | 8.3 mile/h | 9.1 mile/h | - | - |
| Reverse - 3 | 14.4 mile/h | 16 mile/h | - | - |
| Direct Drive - Forward 1 | Lock-up disabled | Lock-up disabled | - | - |
| Direct Drive - Forward 2 | 7.8 mile/h | 8.2 mile/h | - | - |
| Direct Drive - Forward 3 | 13.9 mile/h | 14.5 mile/h | - | - |
| Direct Drive - Forward 4 | 24.4 mile/h | - | - | - |
| Direct Drive - Reverse 1 | 5 mile/h | 5.1 mile/h | - | - |
| Direct Drive - Reverse 2 | 8.9 mile/h | 9.1 mile/h | - | - |
| Direct Drive - Reverse 3 | 15.8 mile/h | 16 mile/h | - | - |
| Note | - | Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. | * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). | *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph). |
| Forward and Reverse - Range 3 | - | - | 17 mile/h | 17 mile/h |
| Forward and Reverse - Range 1* | - | - | 1-13 km/h (0.6-8 mph) | 1-13 km/h (0.6-8 mph) |
| Forward and Reverse - Range 2 | - | - | 8 mile/h | 8 mile/h |
| Forward and Reverse - Range 4 | - | - | 25 mile/h | 25 mile/h |
Hydraulic System - Lift/Tilt |
||||
| Lift/Tilt System - Circuit | EH- Positive Flow Control, Flow Sharing | Positive flow control | - | - |
| Lift/Tilt System - Pump | Variable displacement piston | - | - | - |
| Maximum Flow at 1,400-1,860 rpm | 153 gal/min | - | - | - |
| Relief Valve Setting - Lift/Tilt | 4757 psi | 4786 psi | - | - |
| Cylinders, Double Acting - Lift, Bore and Stroke | 210 mm × 1050 mm (8.7 in × 41.3 in) | 235 mm × 1287 mm (9.3 in × 50.7 in) | - | - |
| Cylinders, Double Acting - Tilt, Bore and Stroke | 266 mm × 685 mm (8.7 in × 27 in) | 292.1 mm × 820 mm (11.5 in × 32.3 in) | - | - |
| Pilot System | Variable displacement piston | Open loop and pressure reducing | - | - |
| Relief Valve Setting - Main | 551 psi | - | - | - |
| Lift/Tilt System | - | Variable displacement piston | - | - |
| Maximum Flow at 1,800 rpm | - | 240 gal/min | - | - |
| Pilot Relief Setting | - | 507 psi | - | - |
Hydraulic Cycle Time (1,400-1,860 rpm) |
||||
| Rack Back | 4.5 s | - | - | - |
| Raise | 8 s | - | - | - |
| Dump | 2.2 s | - | - | - |
| Lower Float Down | 3.5 s | - | - | - |
| Total Hydraulic Cycle Time - Empty Bucket | 18.2 s | - | - | - |
Hydraulic System - Steering |
||||
| Steering System - Circuit | Pilot, load sensing | Pilot, load sensing | - | - |
| Steering System - Pump | Piston, variable displacement | Piston, variable displacement | - | - |
| Maximum Flow at 1,400-1,600 rpm | 71.3 gal/min | - | - | - |
| Relief Valve Setting - Steering | 4351 psi | 5004 psi | - | - |
| Total Steering Angle | 86 ° | 70° | - | - |
| Steering Cycle Times - High Idle | 3.4 s | - | - | - |
| Steering Cycle Times - Low Idle | 5.6 s | - | - | - |
| Maximum Flow at 1,400 rpm | - | 96.2 gal/min | - | - |
Air Conditioning System |
||||
| Air Conditioning | • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system | • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. | The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. |
Axles |
||||
| Front | Fixed | Fixed | - | - |
| Rear | Trunnion | Trunnion | - | - |
| Oscillation Angle | 13 ° | 8.5° | - | - |
Brakes |
||||
| Brakes | ISO 3450:2011 | ISO 3450: 2011 | - | - |
Operator's Cab |
||||
| ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | - | - | - |
Sound Performance - Tier 4 Final / Stage V |
||||
| Operator Sound Pressure Level (ISO 6396:2008) | 73 dB(A) | 72 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008) | 111 dB(A) | 116 dB(A) | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | 72 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008)** | 109 dB(A) | - | - | - |
| Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” | *Sound suppression equipped | - | - |
| Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - |
| Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - | - |
| Machine Sound Power Level (ISO 6395:2008)* | - | 114 dB(A) | - | - |
Sound Performance - Tier 3 / Stage IIIA |
||||
| Operator Sound Pressure Level (ISO 6396:2008) | 73 dB(A) | - | - | - |
| Machine Sound Power Level (ISO 6395:2008) | 112 dB(A) | - | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | - | - | - |
| Machine Sound Power Level (ISO 6395:2008)** | 110 dB(A) | - | - | - |
| Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” | - | - | - |
| Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. | - | - | - |
| Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - | - | - |
| Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - | - | - |
| Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - | - |
Service Refill Capacities |
||||
| Fuel Tank | 188 gal (US) | 281 gal (US) | 51.5 Gal | 51.5 gal (US) |
| Cooling System | 31.7 gal (US) | 54.9 gal (US) | 7.9 gal (US) | 7.9 gal (US) |
| Coolant (Validated by Test Cell Fill Quantities) | 33 gal (US) | - | - | - |
| Crankcase | 15.9 gal (US) | - | - | - |
| Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only) | 8.7 gal (US) | - | - | - |
| Transmission | 24.3 gal (US) | 29.1 gal (US) | - | - |
| Transmission - Validated by Test Cell Fill Quantities | 29 gal (US) | - | - | - |
| Differential - Final Drives - Front | 49.1 gal (US) | 71.6 gal (US) | - | - |
| Differential - Final Drives - Rear | 49.1 gal (US) | 68.9 gal (US) | - | - |
| Hydraulic System Factory Fill | 125.5 gal (US) | 210 gal (US) | - | - |
| Hydraulic System - Tank Only | 63.4 gal (US) | - | - | - |
| Note | • All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester | Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este | - | - |
| Engine Crankcase | - | 20 gal (US) | 5.3 gal (US) | 5.3 gal (US) |
| Hydraulic Tank - Implement and Hydraulic Fan | - | 68.9 gal (US) | - | - |
| Hydraulic Tank - Steering and Braking | - | 34.9 gal (US) | - | - |
| Rear Axles | - | - | 6.6 gal (US) | - |
| Front Axles | - | - | 6.9 gal (US) | - |
| Hydraulic Tank | - | - | 23.8 gal (US) | 23.8 gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | - | - | 5 gal (US) | 5 gal (US) |
| Transmission - Gear Box | - | - | 2.2 gal (US) | 2.2 gal (US) |
| Hydraulic System - Including Tank | - | - | 43.6 gal (US) | 43.6 gal (US) |
| Axles - Front | - | - | - | 6.9 gal (US) |
| Axles - Rear | - | - | - | 6.6 gal (US) |
Dimensions (Approximate) - Standard Lift Linkage |
||||
| Ground to Top of ROPS | 13.8 ft | 17.2 ft | - | - |
| Ground to Top of Exhaust Stacks | 14.8 ft | 16.6 ft | - | - |
| Ground to Top of Hood | 10.9 ft | 12.7 ft | - | - |
| Rear Axle - Centerline to Bumper | 10.5 ft | 12.5 ft | - | - |
| Front Axle Centerline to Bucket Tip | 14 ft | 15.4 ft | - | - |
| Wheel Base | 14.9 ft | 15.1 ft | - | - |
| Maximum Overall Length | 39.3 ft | 42.9 ft | - | - |
| Ground to Lower Hitch Clearance | 1.9 ft | 2 ft | - | - |
| Clearance at Maximum Lift | 11.9 ft | 7.2 ft | - | - |
| B-Pin Height - Maximum Lift | 18 ft | 19.7 ft | - | - |
| Maximum Overall Height - Bucket Raised | 24.5 ft | 27.2 ft | - | - |
| Reach - Maximum Lift | 6.5 ft | 7.2 ft | - | - |
| Ground to Bumper Clearance | - | 3.5 ft | - | - |
| Ground to Center of Front Axle | - | 4.2 ft | - | - |
| Rack Back Angle at Ground Level | - | 40.4° | - | - |
| Rack Back Angle at Carry | - | 48.8° | - | - |
| Rack Angle at Maximum Lift | - | 63.7° | - | - |
| Dump Angle at Maximum Lift | - | 45° | - | - |
| Note | - | Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires. | - | - |
Dimensions (Approximate) - High Lift Linkage |
||||
| Ground to Top of ROPS | 13.8 ft | 17.2 ft | - | - |
| Ground to Top of Exhaust Stacks | 14.8 ft | 16.6 ft | - | - |
| Ground to Top of Hood | 10.9 ft | 12.7 ft | - | - |
| Rear Axle - Centerline to Bumper | 10.5 ft | 12.5 ft | - | - |
| Front Axle Centerline to Bucket Tip | 15.3 ft | 17.8 ft | - | - |
| Wheel Base | 14.9 ft | 15.1 ft | - | - |
| Maximum Overall Length | 40.7 ft | 45.3 ft | - | - |
| Ground to Lower Hitch Clearance | 1.9 ft | 2 ft | - | - |
| Clearance at Maximum Lift | 13.3 ft | 14.8 ft | - | - |
| B-Pin Height - Maximum Lift | 19.3 ft | 21.2 ft | - | - |
| Maximum Overall Height - Bucket Raised | 25.8 ft | 28.7 ft | - | - |
| Reach - Maximum Lift | 6.8 ft | 8.5 ft | - | - |
| Ground to Bumper Clearance | - | 3.5 ft | - | - |
| Ground to Center of Front Axle | - | 4.2 ft | - | - |
| Rack Back Angle at Ground Level | - | 39.9° | - | - |
| Rack Back Angle at Carry | - | 49.3° | - | - |
| Rack Angle at Maximum Lift | - | 60.6° | - | - |
| Dump Angle at Maximum Lift | - | 51° | - | - |
| Note | - | Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires. | - | - |
Hydraulic Cycle Times |
||||
| Rack Back | - | 4.3 s | - | - |
| Raise | - | 8.6 s | - | - |
| Dump | - | 2.9 s | - | - |
| Lower | - | 3.7 s | - | - |
| Lower Float Down | - | 3.7 s | - | - |
| Total Hydraulic Cycle Time - Empty Bucket | - | 13.8 s | - | - |
Sound Performance - Tier 2 |
||||
| Operator Sound Pressure Level (ISO 6396:2008) | - | 72 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008) | - | 116 dB(A) | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | - | 72 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008)* | - | 114 dB(A) | - | - |
| Note (1) | - | *Sound suppression equipped | - | - |
| Note (2) | - | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (3) | - | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (4) | - | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - |
Weights |
||||
| Operating Weight | - | - | 31848 lb | 37713 lb |
| Note (2) | - | - | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. | ^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires. |
| Note (1) | - | - | **Aggregate Handler machine equipped with full counterweight and optional guards. | **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires. |
| Operating Weight (1) | - | - | 14 374 kg (31,689 lb)** | 15 381 kg (33,908 lb)** |
| Operating Weight (2) | - | - | 14 446 kg (31,848 lb)~ | 17 107 kg (37,713 lb)^ |
Buckets |
||||
| Bucket Capacities | - | - | 2.5-5.0 m3 (3.3-6.5 yd3) | 3.0-5.0 m3 (3.9-6.5 yd3) |
Cab |
||||
| ROPS | - | - | ISO 3471:2008 | ISO 3471:2008 |
| Declared Sound Levels | - | - | Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)* |
- |
| FOPS | - | - | ISO 3449:2005 LEVEL II | ISO 3449:2005 LEVEL II |
| Note (1) | - | - | * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. | * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows cl |
| Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* | - | - | - | 68 dB(A) |
| Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* | - | - | - | 101 dB(A) |
Loader Hydraulic System |
||||
| Lift Cylinder, Double Acting - Rod Diameter | - | - | 2.6 in | - |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | - | - | 42 gal/min | 42 gal/min |
| Maximum Flow - Implement Pump | - | - | 50 gal/min | 50 gal/min |
| Relief Pressure - Tilt Cylinder | - | - | 4061 psi | 4061 psi |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) | - | - | 5.1/5.7 seconds | 5.1/5.7 seconds |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) | - | - | 1.5/1.7 seconds | 1.5/1.7 seconds |
| Lift Cylinder, Double Acting - Stroke | - | - | 28.7 in | - |
| Tilt Cylinder, Double Acting - Rod Diameter | - | - | 3.5 in | - |
| Tilt Cylinder, Double Acting - Stroke | - | - | 21.9 in | - |
| Lift Cylinder, Double Acting - Bore Diameter | - | - | 4.7 in | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | - | - | 4061 psi | 4061 psi |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | - | - | 3771 psi | 4061 psi |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) | - | - | 2.7/2.7 seconds | 2.7/2.7 seconds |
| Note (2) | - | - | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
| Tilt Cylinder, Double Acting - Bore Diameter | - | - | 5.9 in | - |
| Note (1) | - | - | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. |
| Maximum Working Pressure - Implement Pump | - | - | 3771 psi | 3771 psi |
| Note (3) | - | - | * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. | * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped. |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time | - | - | 9.3/10.1 seconds | 9.3/10.1 seconds |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | - | - | 50 gal/min | 50 gal/min |
| Lift Cylinder: Standard Lift Linkage - Stroke | - | - | - | 28.7 in |
| Tilt Cylinder: Standard Lift Linkage - Bore Diameter | - | - | - | 5.9 in |
| Lift Cylinder: Standard Lift Linkage - Bore Diameter | - | - | - | 4.7 in |
| Lift Cylinder: Standard Lift Linkage - Rod Diameter | - | - | - | 2.6 in |
| Tilt Cylinder: Standard Lift Linkage - Rod Diameter | - | - | - | 3.5 in |
| Tilt Cylinder: Standard Lift Linkage - Stroke | - | - | - | 21.9 in |
Power Train |
||||
| Brakes - Parking | - | - | Spring applied hydraulically released | Spring applied hydraulically released |
| Rear Axle - Traction Aid - Optional | - | - | Limited slip differential | Limited slip differential |
| Front Axle | - | - | Fixed | Fixed |
| Brakes - Service | - | - | Inboard wet disc | Inboard wet disc |
| Note (2) | - | - | Offset rims available to meet European roading requirements. | Offset rims available to meet European roading requirements. |
| Front Axle - Traction Aid* | - | - | Locking differential (standard) | - |
| Note (3) | - | - | *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M. | Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M. |
| Note (1) | - | - | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. |
| Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 | - | - | ± 10.5 degrees | ± 10.5 degrees |
| Rear Axle | - | - | Oscillating | Oscillating |
| Front Axle - Traction Aid | - | - | - | Locking differential |
| Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder | - | - | - | ± 7 degrees |
Steering |
||||
| Maximum Flow - Steering Pump | - | - | 34 gal/min | 34 gal/min |
| Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | - | - | 2.8 s | 2.8 s |
| Maximum Working Pressure - Steering Pump | - | - | 3500 psi | 3500 psi |
| Steering Cylinder, Double Acting - Bore Diameter | - | - | 2.8 in | 2.8 in |
| Steering Cylinder, Double Acting - Rod Diameter | - | - | 1.6 in | 1.6 in |
| Steering Cylinder, Double Acting - Stroke | - | - | 17.2 in | 17.2 in |
| Note (1) | - | - | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. |
| Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | - | - | 2.4 s | 2.4 s |
| Note (2) | - | - | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
| Maximum Steering Torque - 0° (Straight Machine) | - | - | - | 37155 ft·lbf |
| Maximum Steering Torque - 40° (Full Turn) | - | - | - | 27747 ft·lbf |
Sustainability |
||||
| Recyclability | - | - | 94% | 94% |
Add a Similar Product:
