CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    988 Wheel Loader
    View Product
    986 Wheel Loader
    View Product Remove
    988 GC Wheel Loader
    View Product Remove
    938M Small Wheel Loader
    View Product Remove

    Engine
    Engine Power - ISO 14396:2002 580 hp - - -
    Engine Model Cat® C18 C15 Cat® Cat® C15 Cat C7.1 ACERT**
    Rated Speed 1700/rpm 2000 2000 -
    Peak Power Speed 1500/rpm 1600 1600 -
    Gross Power - SAE J1995:2014 588 hp - 456 hp -
    Net Power - SAE J1349:2011 538 hp 373 hp 373 hp -
    Bore 5.7 in 5.4 in 5.4 in -
    Stroke 7.2 in 6.75 in 6.75 in -
    Displacement 1105 in³ 927 in² 927 in³ -
    Peak Torque - 1,200 rpm 2104 lbf·ft - - -
    Torque Rise 58 % 16% 16% -
    Note (1) Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio - - Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
    Note (2) Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. - - *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
    Peak Power Speed - Gross - SAE J1995 - 456 hp - -
    Engine Power - ISO 14396: 2002 - 449 hp 449 hp -
    Rated Speed - 2,000 rpm - EEC 80/1269 - 373 hp - -
    Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) - 378 hp - -
    Rated Speed - 2,000 rpm - ISO 9249 - 373 hp - -
    Rated Speed - 2,000 rpm - ISO 9249 (DIN) - 378 hp - -
    Peak Torque - 1,200 rpm - SAE J1995 - 1778 lb/ft 1778 ft·lbf -
    Emissions - U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 -
    Maximum Gross Power - - - 188 hp
    Displacement (Standard Power Mode: Speed Range 1-3*) - - - 427 in³
    Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) - - - 1600 r/min
    Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) - - - 183 hp
    Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) - - - 642 ft·lbf
    Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) - - - 176 mhp
    Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) - - - 649 ft·lbf
    Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4) - - - 188 hp
    Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) - - - 172 mhp
    Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) - - - 627 ft·lbf
    Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4) - - - 186 mhp
    Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) - - - 1800 r/min
    Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) - - - 664 ft·lbf
    Displacement (Performance Power Mode: Speed Range 1-4) - - - 427 in³
    Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) - - - 190 mhp
    Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) - - - 170 hp
    Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*) - - - 173 hp
    Note (3) - - - **The Cat C7.1 ACERT engine meets Tier 4 Final/Stage V off-highway emission standards.
    Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) - - - 170 hp
    Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) - - - 628 ft·lbf
    Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) - - - 184 hp
    Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) - - - 650 ft·lbf

    Operating Specifications
    Operating Weight 112574 lb - 116858 lb -
    Bucket Capacity Range 4.7-13 m3 (6.2-17 yd3) 5-10,3 m³ (6,5-13,5 yd.³) 6.4-7.6 m3 (8.3-10 yd3) -
    Rated Payload - Quarry Face 12.5 t - 12.5 ton (US) -
    Rated Payload - Loose Material 16 t - - -
    Cat Truck Match - Standard 770 - 772 770/735/740/745 - -
    Cat Truck Match - High Lift 773 - 775 772/773 772/773/775 -
    Operating Weight - Standard - 97785 lb - -
    Operating Weight - High Lift - 104005 lb - -
    Rated Payload - Standard (Quarry Face) - 11 ton (US) - -
    Rated Payload - Loose Material (Standard) - 14 ton (US) - -
    Rated Payload - High Lift (Quarry Face) - 11 ton (US) - -
    Rated Payload - Loose Material (High Lift) - 12.1 ton (US) - -

    Transmission
    Transmission Type Cat planetary powershift Cat planetary power shift Cat planetary power shift -
    Forward - 1 4 mile/h 5 mile/h 5 mile/h -
    Forward - 2 7.2 mile/h 8 mile/h 8 mile/h -
    Forward - 3 12.7 mile/h - - -
    Forward - 4 21.6 mile/h - - -
    Reverse - 1 4.7 mile/h 5 mile/h 5 mile/h -
    Reverse - 2 8.3 mile/h 8 mile/h 8 mile/h -
    Reverse - 3 14.4 mile/h - - -
    Direct Drive - Forward 1 Lock-up disabled - Lock-up disabled -
    Direct Drive - Forward 2 7.8 mile/h 8 mile/h 8 mile/h -
    Direct Drive - Forward 3 13.9 mile/h 14 mile/h 14 mile/h -
    Direct Drive - Forward 4 24.4 mile/h 24 mile/h 24 mile/h -
    Direct Drive - Reverse 1 5 mile/h - Lock-up disabled -
    Direct Drive - Reverse 2 8.9 mile/h 9 mile/h 9 mile/h -
    Direct Drive - Reverse 3 15.8 mile/h 16 mile/h 16 mile/h -
    Direct Drive - Reverse 4 - 25.4 mile/h 25.4 mile/h -
    Forward and Reverse - Range 3 - - - 17 mile/h
    Forward and Reverse - Range 4 - - - 25 mile/h
    Note - - - *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
    Forward and Reverse - Range 1* - - - 1-13 km/h (0.6-8 mph)
    Forward and Reverse - Range 2 - - - 8 mile/h

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit EH- Positive Flow Control, Flow Sharing Load Sense EH - Load Sense -
    Lift/Tilt System - Pump Variable displacement piston 2 × 110 cc variable displacement - -
    Maximum Flow at 1,400-1,860 rpm 153 gal/min - - -
    Relief Valve Setting - Lift/Tilt 4757 psi 4050 psi 4598 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke 210 mm × 1050 mm (8.7 in × 41.3 in) - 190 mm x 1216 mm (7.5 in x 48 in) -
    Cylinders, Double Acting - Tilt, Bore and Stroke 266 mm × 685 mm (8.7 in × 27 in) - 170 mm x 722 mm (6.7 in x 28.4 in) -
    Pilot System Variable displacement piston - Variable displacement piston -
    Relief Valve Setting - Main 551 psi - - -
    Maximum Flow at 2,165 rpm - 123 gal/min 159 gal/min -
    Lift Cylinder - Bore - 7.5 in - -
    Lift Cylinder - Stroke - 45 in - -
    Tilt Cylinder - Bore - 6.7 in - -
    Tilt Cylinder - Stroke - 28.4 in 27 in -
    Lift/Tilt System - - 2X x 145 cc Variable displacement piston -

    Hydraulic Cycle Time (1,400-1,860 rpm)
    Rack Back 4.5 s - - -
    Raise 8 s - - -
    Dump 2.2 s - - -
    Lower Float Down 3.5 s - - -
    Total Hydraulic Cycle Time - Empty Bucket 18.2 s - - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing Load Sense Pilot, load sensing -
    Steering System - Pump Piston, variable displacement Piston, variable displacement Piston, variable displacement -
    Maximum Flow at 1,400-1,600 rpm 71.3 gal/min - - -
    Relief Valve Setting - Steering 4351 psi - 4000 psi -
    Total Steering Angle 86 ° 70° 70° -
    Steering Cycle Times - High Idle 3.4 s - 3 s -
    Steering Cycle Times - Low Idle 5.6 s - 5.2 s -
    Maximum Flow at 1,400 rpm - 52 gal/min - -
    Steering Cut Off Pressure - 4000 psi - -
    Maximum Flow - - 52 gal (US) -

    Air Conditioning System
    Air Conditioning • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

    Axles
    Front Fixed Fixed Fixed Fixed; Locking differential (standard)
    Rear Trunnion Trunnion Trunnion Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
    Oscillation Angle 13 ° ±12.5° +/-12.5° -
    Oscillation Angle - Chain Arrangement - ±8.5° - -

    Brakes
    Brakes ISO 3450:2011 ISO 3450:2011 ISO 3450:2011 -

    Operator's Cab
    ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards -

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008) 111 dB(A) - - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008)** 109 dB(A) - - -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” - - -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. - - -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -

    Sound Performance - Tier 3 / Stage IIIA
    Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008) 112 dB(A) - - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008)** 110 dB(A) - - -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” - - -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. - - -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -

    Service Refill Capacities
    Fuel Tank 188 gal (US) 141 gal (US) 141 gal (US) 51.5 gal (US)
    Cooling System 31.7 gal (US) - 27 gal (US) 7.9 gal (US)
    Coolant (Validated by Test Cell Fill Quantities) 33 gal (US) - - -
    Crankcase 15.9 gal (US) 9 gal (US) - -
    Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only) 8.7 gal (US) - - -
    Transmission 24.3 gal (US) 20 gal (US) 20 gal (US) -
    Transmission - Validated by Test Cell Fill Quantities 29 gal (US) - - -
    Differential - Final Drives - Front 49.1 gal (US) - 49 gal (US) -
    Differential - Final Drives - Rear 49.1 gal (US) - 45 gal (US) -
    Hydraulic System Factory Fill 125.5 gal (US) 87 gal (US) - -
    Hydraulic System - Tank Only 63.4 gal (US) 34 gal (US) - -
    Note • All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester - Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
    Fuel Tank - Short Lift - 127 gal (US) - -
    Cooling Systems - 26 gal (US) - -
    Diesel Exhaust Fluid Tank - 6 gal (US) 5.5 gal (US) -
    Axle Oil - Differentials and Final Drives - Front - 49 gal (US) - -
    Axle Oil - Differentials and Final Drives - Rear - 45 gal (US) - -
    Engine Crankcase - - 9 gal (US) 5.3 gal (US)
    Transmission - Gear Box - - - 2.9 gal (US)
    Hydraulic System - Including Tank - - - 44.9 gal (US)
    Rear Axles - - - 9.2 gal (US)
    Front Axles - - - 9.2 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - - 5 gal (US)
    Hydraulic Tank - - - 23.8 gal (US)

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS 13.8 ft 13.5 ft - -
    Ground to Top of Exhaust Stacks 14.8 ft 13.3 ft - -
    Ground to Top of Hood 10.9 ft 10.7 ft - -
    Rear Axle - Centerline to Bumper 10.5 ft 10.3 ft - -
    Front Axle Centerline to Bucket Tip 14 ft 13.8 ft - -
    Wheel Base 14.9 ft 12.5 ft - -
    Maximum Overall Length 39.3 ft 36.6 ft - -
    Ground to Lower Hitch Clearance 1.9 ft 1.5 ft - -
    Clearance at Maximum Lift 11.9 ft 10.1 ft - -
    B-Pin Height - Maximum Lift 18 ft 16.1 ft - -
    Maximum Overall Height - Bucket Raised 24.5 ft 22.4 ft - -
    Reach - Maximum Lift 6.5 ft 7.1 ft - -
    Ground to Center of Front Axle - 3.2 ft - -
    Ground to Fuel Tank Clearance - 2.3 ft - -
    Note -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 - -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS 13.8 ft 13.5 ft - -
    Ground to Top of Exhaust Stacks 14.8 ft 13.3 ft - -
    Ground to Top of Hood 10.9 ft 10.7 ft - -
    Rear Axle - Centerline to Bumper 10.5 ft 10.3 ft - -
    Front Axle Centerline to Bucket Tip 15.3 ft 15.3 ft - -
    Wheel Base 14.9 ft 12.5 ft - -
    Maximum Overall Length 40.7 ft 38 ft - -
    Ground to Lower Hitch Clearance 1.9 ft 1.5 ft - -
    Clearance at Maximum Lift 13.3 ft 11.6 ft - -
    B-Pin Height - Maximum Lift 19.3 ft 17.6 ft - -
    Maximum Overall Height - Bucket Raised 25.8 ft 23.9 ft - -
    Reach - Maximum Lift 6.8 ft 7.4 ft - -
    Ground to Center of Front Axle - 3.2 ft - -
    Ground to Fuel Tank Clearance - 2.3 ft - -
    Note -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 - -

    Hydraulic Cycle Times
    Rack Back - 4.5 s 3.8 s -
    Raise - 9 s 7.5 s -
    Dump - 3.5 s 3 s -
    Lower - 5.2 s - -
    Lower Float Down - 4.3 s 4.6 s -
    Total Hydraulic Cycle Time - 21.3 s - -
    Total Hydraulic Cycle Time - Empty Bucket - - 18.9 s -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396) - 72 dB(A) - -
    Machine Sound Level (ISO 6395) - 112 dB(A) - -
    Note -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		- -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396) - 72 dB(A) - -
    Machine Sound Level (ISO 6395) - 110 dB(A) - -
    Note -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		- -

    Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
    Ground to Top of ROPS - 13.5 ft - -
    Ground to Top of Exhaust Stacks - 13.3 ft - -
    Ground to Top of Hood - 10.7 ft - -
    Ground to Center of Rear Axle - 3.2 ft - -
    Ground to Fuel Tank Clearance - 2.3 ft - -
    Ground to Lower Hitch Clearance - 1.5 ft - -
    Reach at Maximum Lift - 8 ft - -
    Clearance at Maximum Lift - 10.7 ft - -
    B-Pin Height at Maximum Lift - 15 ft - -
    Maximum Overall Height, Bucket Raised - 20.9 ft - -
    Rear Axle Center Line to Bumper - 10.3 ft - -
    Wheel Base - 12.5 ft - -
    Maximum Overall Length - 35 ft - -
    Front Axle Centerline to Bucket Tip - 12.2 ft - -

    Dimensions (Approximate) - Quick Coupler and Fork
    Ground to Top of ROPS - 13.5 ft - -
    Ground to Top of Exhaust Stacks - 13.3 ft - -
    Ground to Top of Hood - 10.7 ft - -
    Ground to Center of Rear Axle - 3.2 ft - -
    Ground to Fuel Tank Clearance - 2.3 ft - -
    Ground to Lower Hitch Clearance - 1.5 ft - -
    B-Pin Height at Maximum Lift - 15 ft - -
    Rear Axle Center Line to Bumper - 10.3 ft - -
    Wheel Base - 12.5 ft - -
    Maximum Overall Length - 35.4 ft - -
    Front Axle Centerline to Bucket Tip - 12.6 ft - -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - - 72 dB(A) -
    Machine Sound Level (ISO 6395) - - 110 dB(A) -
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS - - 13.5 ft -
    Ground to Top of Exhaust Stacks - - 13.3 ft -
    Ground to Top of Hood - - 10.7 ft -
    Rear Axle - Centerline to Bumper - - 10.3 ft -
    Front Axle Centerline to Bucket Tip - - 15.7 ft -
    Wheel Base - - 12.5 ft -
    Maximum Overall Length - - 39.5 ft -
    Ground to Lower Hitch Clearance - - 1.5 ft -
    Clearance at Maximum Lift - - 12 ft -
    B-Pin Height - Maximum Lift - - 18.7 ft -
    Maximum Overall Height - Bucket Raised - - 25 ft -
    Reach - Maximum Lift - - 7.7 ft -
    Note - - Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. -

    Buckets
    Bucket Capacities - - 6.4-7.6 m3 (8.3-10 yd3) 2.5-5.0 m3 (3.2-6.5 yd3)
    Bucket Capacities - Light Material - - - 3.1-5.0 m³ (4.0-6.5 yd³)
    Bucket Capacities - General Purpose - - - 2.5-3.2 m³ (3.2-4.2 yd³)

    Sustainability
    Recyclability - - 96% 94%

    Weights
    Operating Weight - - - 35778 lb

    Cab
    ROPS - - - ISO 3471:2008
    FOPS - - - ISO 3449:2008 Level II
    Note (3) - - - *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
    Note (1) - - - Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
    Note (2) - - - The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are:
    – Standard cab: 68 ±3 dB(A)
    – Deluxe cab: 66 ±2 dB(A)

    Sound
    Average Exterior Sound Pressure (ISO 6395:2008) - - - 101 dB(A)
    Operator Sound Pressure (ISO 6396:2008) - - - 72 dB(A)
    Note (1) - - - European Union Directive “2000/14/EC”

    Loader Hydraulic System
    Note (1) - - - *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
    Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift - - - 5.5 s
    Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time - - - 9.7 s
    Relief Pressure - Tilt Cylinder - - - 4351 psi
    Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time - - - 10.6 s
    Maximum Working Pressure - Implement Pump - - - 4061 psi
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure - - - 4061 psi
    Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height - - - 1.7 s
    Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height - - - 1.5 s
    Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift - - - 6.2 s
    Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level - - - 2.7 s
    Maximum Flow - Implement Pump - 4th Function Maximum Flow* - - - 42 gal/min
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure - - - 4351 psi
    Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level - - - 2.7 s
    Maximum Flow - Implement Pump - - - 50 gal/min
    Maximum Flow - Implement Pump - 3rd Function Maximum Flow* - - - 50 gal/min

    Steering
    Maximum Working Pressure - Steering Pump - - - 3500 psi
    Steering Articulation Angle - Each Direction - - - 40°
    Maximum Flow - Steering Pump - - - 34 gal/min
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left - - - 3.3 turns
    Maximum Steering Torque - 0° (Straight Machine) - - - 42506 ft·lbf
    Maximum Steering Torque - 40° (Full Turn) - - - 31398 ft·lbf
    Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed - - - 2.3 s

    Tires
    Note (1) - - - Other tire choices are available. Contact your Cat dealer for details.
    Standard Size - - - 20.5 R25, radial (L-3)
    Note (2) - - - In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
    Other Choices Include - - - 20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 23.5 R25, radial (L-3); 650/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires
    Note (3) - - - Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    Add a Similar Product:
    • 992 Wheel Loader Add
    • 995 Wheel Loader Add
    • 990 Wheel Loader Add
    • 988 XE Wheel Loader Add
    • 938M Waste Handler Small Wheel Loader Add
    • 950 GC Wheel Loader | Front Loader Add
    • 938M Aggregate Handler Small Wheel Loader Add
    • 930M Aggregate Handler Small Wheel Loader Add
    • 930M Waste Handler Small Wheel Loader Add
    • 930M Small Wheel Loader Add