Compare Equipment Go Back
 988 Wheel Loader |
 986 Wheel Loader |
 988 GC Wheel Loader |
 995 Wheel Loader |
|
Engine |
||||
|---|---|---|---|---|
| Engine Power - ISO 14396:2002 | 580 hp | - | - | - |
| Engine Model | Cat® C18 | C15 Cat® | Cat® C15 | Cat® 3516E |
| Rated Speed | 1700/rpm | 2000 | 2000 | - |
| Peak Power Speed | 1500/rpm | 1600 | 1600 | - |
| Gross Power - SAE J1995:2014 | 588 hp | - | 456 hp | 1870 hp |
| Net Power - SAE J1349:2011 | 538 hp | 373 hp | 373 hp | - |
| Bore | 5.7 in | 5.4 in | 5.4 in | 6.7 in |
| Stroke | 7.2 in | 6.75 in | 6.75 in | 8.5 in |
| Displacement | 1105 in³ | 927 in² | 927 in³ | 4766 in³ |
| Peak Torque - 1,200 rpm | 2104 lbf·ft | - | - | - |
| Torque Rise | 58 % | 16% | 16% | 39% |
| Note (1) | Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio | - | - | The power ratings apply when tested under the reference conditions for the specified standard. |
| Note (2) | Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. | - | - | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. |
| Peak Power Speed - Gross - SAE J1995 | - | 456 hp | - | - |
| Engine Power - ISO 14396: 2002 | - | 449 hp | 449 hp | 1847 hp |
| Rated Speed - 2,000 rpm - EEC 80/1269 | - | 373 hp | - | - |
| Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) | - | 378 hp | - | - |
| Rated Speed - 2,000 rpm - ISO 9249 | - | 373 hp | - | - |
| Rated Speed - 2,000 rpm - ISO 9249 (DIN) | - | 378 hp | - | - |
| Peak Torque - 1,200 rpm - SAE J1995 | - | 1778 lb/ft | 1778 ft·lbf | 8549 lb/ft |
| Emissions | - | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 | U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent |
| Net Power - SAE J1349 - Standard Ambient | - | - | - | 1739 hp |
| Net Power - SAE J1349 - High Ambient | - | - | - | 1696 hp |
| Note (3) | - | - | - | The gross power advertised is with the fan at maximum speed. |
Operating Specifications |
||||
| Operating Weight | 112574 lb | - | 116858 lb | - |
| Bucket Capacity Range | 4.7-13 m3 (6.2-17 yd3) | 5-10,3 m³ (6,5-13,5 yd.³) | 6.4-7.6 m3 (8.3-10 yd3) | 17.2-43.6 m3 (22.3-57 yd3) |
| Rated Payload - Quarry Face | 12.5 t | - | 12.5 ton (US) | - |
| Rated Payload - Loose Material | 16 t | - | - | - |
| Cat Truck Match - Standard | 770 - 772 | 770/735/740/745 | - | 785/789 |
| Cat Truck Match - High Lift | 773 - 775 | 772/773 | 772/773/775 | 789/793/794 |
| Operating Weight - Standard | - | 97785 lb | - | 543772 lb |
| Operating Weight - High Lift | - | 104005 lb | - | 547675 lb |
| Rated Payload - Standard (Quarry Face) | - | 11 ton (US) | - | - |
| Rated Payload - Loose Material (Standard) | - | 14 ton (US) | - | - |
| Rated Payload - High Lift (Quarry Face) | - | 11 ton (US) | - | - |
| Rated Payload - Loose Material (High Lift) | - | 12.1 ton (US) | - | - |
| Rated Payload - Standard Lift (Low to Moderate Digging Resistance) | - | - | - | 60 ton (US) |
| Rated Payload - Standard Lift (Moderate to High Digging Resistance) | - | - | - | 50 ton (US) |
| Rated Payload - High Lift (Low to Moderate Digging Resistance) | - | - | - | 55 ton (US) |
| Rated Payload - High Lift (Moderate to High Digging Resistance) | - | - | - | 50 ton (US) |
| Note | - | - | - | *Please contact your local dealer to determine if your application is suitable for this increased rated payload. |
Transmission |
||||
| Transmission Type | Cat planetary powershift | Cat planetary power shift | Cat planetary power shift | Cat Planetary Power Shift |
| Forward - 1 | 4 mile/h | 5 mile/h | 5 mile/h | 4.6 mile/h |
| Forward - 2 | 7.2 mile/h | 8 mile/h | 8 mile/h | 8 mile/h |
| Forward - 3 | 12.7 mile/h | - | - | 13.6 mile/h |
| Forward - 4 | 21.6 mile/h | - | - | - |
| Reverse - 1 | 4.7 mile/h | 5 mile/h | 5 mile/h | 5 mile/h |
| Reverse - 2 | 8.3 mile/h | 8 mile/h | 8 mile/h | 8.8 mile/h |
| Reverse - 3 | 14.4 mile/h | - | - | 14.9 mile/h |
| Direct Drive - Forward 1 | Lock-up disabled | - | Lock-up disabled | Lock-up disables |
| Direct Drive - Forward 2 | 7.8 mile/h | 8 mile/h | 8 mile/h | 8.7 mile/h |
| Direct Drive - Forward 3 | 13.9 mile/h | 14 mile/h | 14 mile/h | 15.2 mile/h |
| Direct Drive - Forward 4 | 24.4 mile/h | 24 mile/h | 24 mile/h | - |
| Direct Drive - Reverse 1 | 5 mile/h | - | Lock-up disabled | Lock-up disables |
| Direct Drive - Reverse 2 | 8.9 mile/h | 9 mile/h | 9 mile/h | 9.6 mile/h |
| Direct Drive - Reverse 3 | 15.8 mile/h | 16 mile/h | 16 mile/h | 16.8 mile/h |
| Direct Drive - Reverse 4 | - | 25.4 mile/h | 25.4 mile/h | - |
| Note | - | - | - | Travel speeds based on 58/85-57 tires. |
Hydraulic System - Lift/Tilt |
||||
| Lift/Tilt System - Circuit | EH- Positive Flow Control, Flow Sharing | Load Sense | EH - Load Sense | Positive Flow Control |
| Lift/Tilt System - Pump | Variable displacement piston | 2 × 110 cc variable displacement | - | Variable Displacement Piston |
| Maximum Flow at 1,400-1,860 rpm | 153 gal/min | - | - | - |
| Relief Valve Setting - Lift/Tilt | 4757 psi | 4050 psi | 4598 psi | 5004 psi |
| Cylinders, Double Acting - Lift, Bore and Stroke | 210 mm × 1050 mm (8.7 in × 41.3 in) | - | 190 mm x 1216 mm (7.5 in x 48 in) | 370 × 1713 mm (14.6 × 67.4 in) |
| Cylinders, Double Acting - Tilt, Bore and Stroke | 266 mm × 685 mm (8.7 in × 27 in) | - | 170 mm x 722 mm (6.7 in x 28.4 in) | 310 × 1086 mm (12.2 × 42.8 in) |
| Pilot System | Variable displacement piston | - | Variable displacement piston | Open Loop and Pressure Reducing |
| Relief Valve Setting - Main | 551 psi | - | - | - |
| Maximum Flow at 2,165 rpm | - | 123 gal/min | 159 gal/min | - |
| Lift Cylinder - Bore | - | 7.5 in | - | - |
| Lift Cylinder - Stroke | - | 45 in | - | - |
| Tilt Cylinder - Bore | - | 6.7 in | - | - |
| Tilt Cylinder - Stroke | - | 28.4 in | 27 in | - |
| Lift/Tilt System | - | - | 2X x 145 cc Variable displacement piston | - |
| Maximum Flow at 1,700 rpm Engine Speed | - | - | - | 541 gal/min |
Hydraulic Cycle Time (1,400-1,860 rpm) |
||||
| Rack Back | 4.5 s | - | - | - |
| Raise | 8 s | - | - | - |
| Dump | 2.2 s | - | - | - |
| Lower Float Down | 3.5 s | - | - | - |
| Total Hydraulic Cycle Time - Empty Bucket | 18.2 s | - | - | - |
Hydraulic System - Steering |
||||
| Steering System - Circuit | Pilot, load sensing | Load Sense | Pilot, load sensing | Pilot, Load Sensing |
| Steering System - Pump | Piston, variable displacement | Piston, variable displacement | Piston, variable displacement | Piston, Variable Displacement |
| Maximum Flow at 1,400-1,600 rpm | 71.3 gal/min | - | - | - |
| Relief Valve Setting - Steering | 4351 psi | - | 4000 psi | - |
| Total Steering Angle | 86 ° | 70° | 70° | 80 degrees |
| Steering Cycle Times - High Idle | 3.4 s | - | 3 s | 4.3 s |
| Steering Cycle Times - Low Idle | 5.6 s | - | 5.2 s | 7.6 s |
| Maximum Flow at 1,400 rpm | - | 52 gal/min | - | - |
| Steering Cut Off Pressure | - | 4000 psi | - | - |
| Maximum Flow | - | - | 52 gal (US) | - |
Air Conditioning System |
||||
| Air Conditioning | • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co | - |
Axles |
||||
| Front | Fixed | Fixed | Fixed | Fixed |
| Rear | Trunnion | Trunnion | Trunnion | Trunnion |
| Oscillation Angle | 13 ° | ±12.5° | +/-12.5° | 9° |
| Oscillation Angle - Chain Arrangement | - | ±8.5° | - | - |
Brakes |
||||
| Brakes | ISO 3450:2011 | ISO 3450:2011 | ISO 3450:2011 | ISO 3450:2011 |
Operator's Cab |
||||
| ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | - |
Sound Performance - Tier 4 Final / Stage V |
||||
| Operator Sound Pressure Level (ISO 6396:2008) | 73 dB(A) | - | - | - |
| Machine Sound Power Level (ISO 6395:2008) | 111 dB(A) | - | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | - | - | - |
| Machine Sound Power Level (ISO 6395:2008)** | 109 dB(A) | - | - | - |
| Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” | - | - | - |
| Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. | - | - | - |
| Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - | - | - |
| Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - | - | - |
| Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - | - |
Sound Performance - Tier 3 / Stage IIIA |
||||
| Operator Sound Pressure Level (ISO 6396:2008) | 73 dB(A) | - | - | - |
| Machine Sound Power Level (ISO 6395:2008) | 112 dB(A) | - | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | - | - | - |
| Machine Sound Power Level (ISO 6395:2008)** | 110 dB(A) | - | - | - |
| Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” | - | - | - |
| Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. | - | - | - |
| Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - | - | - |
| Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - | - | - |
| Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - | - |
Service Refill Capacities |
||||
| Fuel Tank | 188 gal (US) | 141 gal (US) | 141 gal (US) | - |
| Cooling System | 31.7 gal (US) | - | 27 gal (US) | - |
| Coolant (Validated by Test Cell Fill Quantities) | 33 gal (US) | - | - | - |
| Crankcase | 15.9 gal (US) | 9 gal (US) | - | - |
| Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only) | 8.7 gal (US) | - | - | - |
| Transmission | 24.3 gal (US) | 20 gal (US) | 20 gal (US) | - |
| Transmission - Validated by Test Cell Fill Quantities | 29 gal (US) | - | - | - |
| Differential - Final Drives - Front | 49.1 gal (US) | - | 49 gal (US) | - |
| Differential - Final Drives - Rear | 49.1 gal (US) | - | 45 gal (US) | - |
| Hydraulic System Factory Fill | 125.5 gal (US) | 87 gal (US) | - | - |
| Hydraulic System - Tank Only | 63.4 gal (US) | 34 gal (US) | - | - |
| Note | • All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester | - | Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a | - |
| Fuel Tank - Short Lift | - | 127 gal (US) | - | - |
| Cooling Systems | - | 26 gal (US) | - | - |
| Diesel Exhaust Fluid Tank | - | 6 gal (US) | 5.5 gal (US) | - |
| Axle Oil - Differentials and Final Drives - Front | - | 49 gal (US) | - | - |
| Axle Oil - Differentials and Final Drives - Rear | - | 45 gal (US) | - | - |
| Engine Crankcase | - | - | 9 gal (US) | - |
Dimensions (Approximate) - Standard Lift Linkage |
||||
| Ground to Top of ROPS | 13.8 ft | 13.5 ft | - | - |
| Ground to Top of Exhaust Stacks | 14.8 ft | 13.3 ft | - | - |
| Ground to Top of Hood | 10.9 ft | 10.7 ft | - | - |
| Rear Axle - Centerline to Bumper | 10.5 ft | 10.3 ft | - | - |
| Front Axle Centerline to Bucket Tip | 14 ft | 13.8 ft | - | - |
| Wheel Base | 14.9 ft | 12.5 ft | - | - |
| Maximum Overall Length | 39.3 ft | 36.6 ft | - | - |
| Ground to Lower Hitch Clearance | 1.9 ft | 1.5 ft | - | - |
| Clearance at Maximum Lift | 11.9 ft | 10.1 ft | - | - |
| B-Pin Height - Maximum Lift | 18 ft | 16.1 ft | - | - |
| Maximum Overall Height - Bucket Raised | 24.5 ft | 22.4 ft | - | - |
| Reach - Maximum Lift | 6.5 ft | 7.1 ft | - | - |
| Ground to Center of Front Axle | - | 3.2 ft | - | - |
| Ground to Fuel Tank Clearance | - | 2.3 ft | - | - |
| Note | - |
|
- | - |
Dimensions (Approximate) - High Lift Linkage |
||||
| Ground to Top of ROPS | 13.8 ft | 13.5 ft | - | - |
| Ground to Top of Exhaust Stacks | 14.8 ft | 13.3 ft | - | - |
| Ground to Top of Hood | 10.9 ft | 10.7 ft | - | - |
| Rear Axle - Centerline to Bumper | 10.5 ft | 10.3 ft | - | - |
| Front Axle Centerline to Bucket Tip | 15.3 ft | 15.3 ft | - | - |
| Wheel Base | 14.9 ft | 12.5 ft | - | - |
| Maximum Overall Length | 40.7 ft | 38 ft | - | - |
| Ground to Lower Hitch Clearance | 1.9 ft | 1.5 ft | - | - |
| Clearance at Maximum Lift | 13.3 ft | 11.6 ft | - | - |
| B-Pin Height - Maximum Lift | 19.3 ft | 17.6 ft | - | - |
| Maximum Overall Height - Bucket Raised | 25.8 ft | 23.9 ft | - | - |
| Reach - Maximum Lift | 6.8 ft | 7.4 ft | - | - |
| Ground to Center of Front Axle | - | 3.2 ft | - | - |
| Ground to Fuel Tank Clearance | - | 2.3 ft | - | - |
| Note | - |
|
- | - |
Hydraulic Cycle Times |
||||
| Rack Back | - | 4.5 s | 3.8 s | 4.9 s |
| Raise | - | 9 s | 7.5 s | 12.6 s |
| Dump | - | 3.5 s | 3 s | 3.1 s |
| Lower | - | 5.2 s | - | - |
| Lower Float Down | - | 4.3 s | 4.6 s | 4.2 s |
| Total Hydraulic Cycle Time | - | 21.3 s | - | - |
| Total Hydraulic Cycle Time - Empty Bucket | - | - | 18.9 s | - |
Sound Performance - Standard |
||||
| Operator Sound Level (ISO 6396) | - | 72 dB(A) | - | - |
| Machine Sound Level (ISO 6395) | - | 112 dB(A) | - | - |
| Note | - |
|
- | The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c |
| Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | - | - | - | 74 dB(A) |
| Machine Sound Level (ISO 6395:2008) | - | - | - | 119 dB(A) |
Sound Performance - Suppression |
||||
| Operator Sound Level (ISO 6396) | - | 72 dB(A) | - | - |
| Machine Sound Level (ISO 6395) | - | 110 dB(A) | - | - |
| Note | - |
|
- | The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c |
| Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | - | - | - | 73 dB(A) |
| Machine Sound Level (ISO 6395:2008) | - | - | - | 117 dB(A) |
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket |
||||
| Ground to Top of ROPS | - | 13.5 ft | - | - |
| Ground to Top of Exhaust Stacks | - | 13.3 ft | - | - |
| Ground to Top of Hood | - | 10.7 ft | - | - |
| Ground to Center of Rear Axle | - | 3.2 ft | - | - |
| Ground to Fuel Tank Clearance | - | 2.3 ft | - | - |
| Ground to Lower Hitch Clearance | - | 1.5 ft | - | - |
| Reach at Maximum Lift | - | 8 ft | - | - |
| Clearance at Maximum Lift | - | 10.7 ft | - | - |
| B-Pin Height at Maximum Lift | - | 15 ft | - | - |
| Maximum Overall Height, Bucket Raised | - | 20.9 ft | - | - |
| Rear Axle Center Line to Bumper | - | 10.3 ft | - | - |
| Wheel Base | - | 12.5 ft | - | - |
| Maximum Overall Length | - | 35 ft | - | - |
| Front Axle Centerline to Bucket Tip | - | 12.2 ft | - | - |
Dimensions (Approximate) - Quick Coupler and Fork |
||||
| Ground to Top of ROPS | - | 13.5 ft | - | - |
| Ground to Top of Exhaust Stacks | - | 13.3 ft | - | - |
| Ground to Top of Hood | - | 10.7 ft | - | - |
| Ground to Center of Rear Axle | - | 3.2 ft | - | - |
| Ground to Fuel Tank Clearance | - | 2.3 ft | - | - |
| Ground to Lower Hitch Clearance | - | 1.5 ft | - | - |
| B-Pin Height at Maximum Lift | - | 15 ft | - | - |
| Rear Axle Center Line to Bumper | - | 10.3 ft | - | - |
| Wheel Base | - | 12.5 ft | - | - |
| Maximum Overall Length | - | 35.4 ft | - | - |
| Front Axle Centerline to Bucket Tip | - | 12.6 ft | - | - |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
||||
| Operator Sound Level (ISO 6396) | - | - | 72 dB(A) | - |
| Machine Sound Level (ISO 6395) | - | - | 110 dB(A) | - |
| Note (1) | - | - | The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - |
| Note (2) | - | - | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - |
| Note (3) | - | - | The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - |
Dimensions (Approximate) - High Lift |
||||
| Ground to Top of ROPS | - | - | 13.5 ft | - |
| Ground to Top of Exhaust Stacks | - | - | 13.3 ft | - |
| Ground to Top of Hood | - | - | 10.7 ft | - |
| Rear Axle - Centerline to Bumper | - | - | 10.3 ft | - |
| Front Axle Centerline to Bucket Tip | - | - | 15.7 ft | - |
| Wheel Base | - | - | 12.5 ft | - |
| Maximum Overall Length | - | - | 39.5 ft | - |
| Ground to Lower Hitch Clearance | - | - | 1.5 ft | - |
| Clearance at Maximum Lift | - | - | 12 ft | - |
| B-Pin Height - Maximum Lift | - | - | 18.7 ft | - |
| Maximum Overall Height - Bucket Raised | - | - | 25 ft | - |
| Reach - Maximum Lift | - | - | 7.7 ft | - |
| Note | - | - | Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. | - |
Buckets |
||||
| Bucket Capacities | - | - | 6.4-7.6 m3 (8.3-10 yd3) | - |
Sustainability |
||||
| Recyclability | - | - | 96% | - |
Complete System Fill |
||||
| Fuel Tank - Standard | - | - | - | 856 gal (US) |
| Fuel Tank - With 24 hr Attachment | - | - | - | 1414 gal (US) |
| Cooling System | - | - | - | 138 gal (US) |
| Engine Crankcase | - | - | - | 76 gal (US) |
| Transmission | - | - | - | 110 gal (US) |
| Differential - Final Drives - Front | - | - | - | 220 gal (US) |
| Differential - Final Drives - Rear | - | - | - | 200 gal (US) |
| Hydraulic Tank - Implement and Hydraulic Fan | - | - | - | 270 gal (US) |
| Hydraulic Tank - Steering and Braking | - | - | - | 100 gal (US) |
| Oil Renewal System (ORS)* | - | - | - | 20 gal (US) |
| Note | - | - | - | *Not available on Tier 4 Final/Stage V machines. Not available in all regions. |
Cooling System |
||||
| Ambient Capability Hydraulically Driven Demand Fan - Standard | - | - | - | 109.4 °F |
| Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) | - | - | - | 131 °F |
| Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) | - | - | - | 127.4 °F |
Dimensions - Standard Lift - Approximate |
||||
| B-Pin Height - Maximum Lift | - | - | - | 28.8 ft |
| Clearance at Maximum Lift | - | - | - | 19.8 ft |
| Dump Angle at Maximum Lift | - | - | - | –50.0 degrees |
| Front Axle Centerline to Bucket Tip | - | - | - | 21.9 ft |
| Ground to Bumper Clearance | - | - | - | 4.4 ft |
| Ground to Center of Axles | - | - | - | 6 ft |
| Ground to Lower Hitch Clearance | - | - | - | 2.9 ft |
| Ground to Top of Exhaust Stacks | - | - | - | 23.2 ft |
| Ground to Top of Hood | - | - | - | 18.6 ft |
| Ground to Top of ROPS | - | - | - | 23.4 ft |
| Maximum Overall Height - Bucket Raised | - | - | - | 39.3 ft |
| Maximum Overall Length | - | - | - | 64.6 ft |
| Note | - | - | - | Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
| Rack Angle at Maximum Lift | - | - | - | 59.5 degrees |
| Rack Back Angle - Carry | - | - | - | 47.7 degrees |
| Rack Back Angle - Ground Level | - | - | - | 39.7 degrees |
| Reach - Maximum Lift | - | - | - | 9.6 ft |
| Rear Axle - Centerline to Bumper | - | - | - | 20.4 ft |
| Tread Width | - | - | - | 14.1 ft |
| Wheel Base | - | - | - | 22.3 ft |
| Width - Over Tires - With Bulge | - | - | - | 18.8 ft |
Dimensions - High Lift - Approximate |
||||
| B-Pin Height - Maximum Lift | - | - | - | 31.6 ft |
| Clearance at Maximum Lift | - | - | - | 22.6 ft |
| Dump Angle at Maximum Lift | - | - | - | –50.0 degrees |
| Front Axle Centerline to Bucket Tip | - | - | - | 24.2 ft |
| Ground to Bumper Clearance | - | - | - | 4.4 ft |
| Ground to Center of Axles | - | - | - | 6 ft |
| Ground to Lower Hitch Clearance | - | - | - | 2.9 ft |
| Ground to Top of Exhaust Stacks | - | - | - | 23.2 ft |
| Ground to Top of Hood | - | - | - | 18.6 ft |
| Ground to Top of ROPS | - | - | - | 23.4 ft |
| Maximum Overall Height - Bucket Raised | - | - | - | 42.1 ft |
| Maximum Overall Length | - | - | - | 66.9 ft |
| Note | - | - | - | Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
| Rack Angle at Maximum Lift | - | - | - | 59.4 degrees |
| Rack Back Angle - Carry | - | - | - | 53.5 degrees |
| Rack Back Angle - Ground Level | - | - | - | 45 degrees |
| Reach - Maximum Lift | - | - | - | 9.4 ft |
| Rear Axle - Centerline to Bumper | - | - | - | 20.4 ft |
| Tread Width | - | - | - | 14.1 ft |
| Wheel Base | - | - | - | 22.3 ft |
| Width - Over Tires - With Bulge | - | - | - | 18.8 ft |
Add a Similar Product:
-
992 Wheel Loader Add
-
990 Wheel Loader Add
-
988 XE Wheel Loader Add
-
938M Waste Handler Small Wheel Loader Add
-
950 GC Wheel Loader | Front Loader Add
-
938M Small Wheel Loader Add
-
938M Aggregate Handler Small Wheel Loader Add
-
930M Aggregate Handler Small Wheel Loader Add
-
930M Waste Handler Small Wheel Loader Add
-
930M Small Wheel Loader Add