Compare Equipment Go Back
 988 Wheel Loader |
 988 GC Wheel Loader |
|
|
Engine |
|||
|---|---|---|---|
| Net Power - SAE J1349:2011 | 538 hp | 373 hp | - |
| Engine Power - ISO 14396:2002 | 580 hp | - | - |
| Gross Power - SAE J1995:2014 | 588 hp | 456 hp | - |
| Engine Model | Cat® C18 ™ | Cat® C15 | - |
| Rated Speed | 1700/min | 2000 | - |
| Peak Power Speed | 1500/rpm | 1600 | - |
| Emissions | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 | - |
| Bore | 5.7 in | 5.4 in | - |
| Stroke | 7.2 in | 6.75 in | - |
| Displacement | 1105 in³ | 927 in³ | - |
| Peak Torque - 1,200 rpm | 2230 lb/ft | - | - |
| Torque Rise | 58 % | 16% | - |
| Engine Power - ISO 14396: 2002 | - | 449 hp | - |
| Peak Torque - 1,200 rpm - SAE J1995 | - | 1778 ft·lbf | - |
Operating Specifications |
|||
| Operating Weight | 112574 lb | 116858 lb | - |
| Rated Payload - Quarry Face | 12.5 t | 12.5 ton (US) | - |
| Rated Payload - Loose Material | 16 t | - | - |
| Bucket Capacity Range | 4.7-13 m3 (6.2-17 yd3) | 6.4-7.6 m3 (8.3-10 yd3) | - |
| Cat Truck Match - Standard | 770～772 | - | - |
| Cat Truck Match - High Lift | 773～775 | 772/773/775 | - |
Transmission |
|||
| Transmission Type | Cat planetary powershift | Cat planetary power shift | - |
| Forward - 1 | 4 mile/h | 5 mile/h | - |
| Forward - 2 | 7.2 mile/h | 8 mile/h | - |
| Forward - 3 | 12.7 mile/h | - | - |
| Forward - 4 | 21.6 mile/h | - | - |
| Reverse - 1 | 4.7 mile/h | 5 mile/h | - |
| Reverse - 2 | 8.3 mile/h | 8 mile/h | - |
| Reverse - 3 | 14.4 mile/h | - | - |
| Direct Drive - Forward 1 | Lock-up disabled | Lock-up disabled | - |
| Direct Drive - Forward 2 | 7.8 mile/h | 8 mile/h | - |
| Direct Drive - Forward 3 | 13.9 mile/h | 14 mile/h | - |
| Direct Drive - Forward 4 | 24.4 mile/h | 24 mile/h | - |
| Direct Drive - Reverse 1 | 5 mile/h | Lock-up disabled | - |
| Direct Drive - Reverse 2 | 8.9 mile/h | 9 mile/h | - |
| Direct Drive - Reverse 3 | 15.8 mile/h | 16 mile/h | - |
| Direct Drive - Reverse 4 | - | 25.4 mile/h | - |
Hydraulic System - Lift/Tilt |
|||
| Lift/Tilt System - Circuit | EH- Positive Flow Control, Flow Sharing | EH - Load Sense | - |
| Lift/Tilt System | Variable displacement piston | 2X x 145 cc Variable displacement piston | - |
| Maximum Flow at 1,400-1,860 rpm | 153 gal/min | - | - |
| Relief Valve Setting - Lift/Tilt | 4757 psi | 4598 psi | - |
| Cylinders, Double Acting - Lift, Bore and Stroke | 210 mm × 1050 mm (8.7 in × 41.3 in) | 190 mm x 1216 mm (7.5 in x 48 in) | - |
| Cylinders, Double Acting - Tilt, Bore and Stroke | 269 mm × 685 mm (8.7 in × 27 in) | 170 mm x 722 mm (6.7 in x 28.4 in) | - |
| Pilot System | Variable displacement piston | Variable displacement piston | - |
| Relief Valve Setting - Main | 551 psi | - | - |
| Maximum Flow at 2,165 rpm | - | 159 gal/min | - |
| Tilt Cylinder - Stroke | - | 27 in | - |
Hydraulic Cycle Time (1,400-1,860 rpm) |
|||
| Rack Back | 4.5 s | - | - |
| Raise | 8 s | - | - |
| Dump | 2.2 s | - | - |
| Lower Float Down | 3.5 s | - | - |
| Total Hydraulic Cycle Time - Empty Bucket | 18.2 s | - | - |
Hydraulic System - Steering |
|||
| Steering System - Circuit | Pilot, load sensing | Pilot, load sensing | - |
| Steering System - Pump | Piston, variable displacement | Piston, variable displacement | - |
| Maximum Flow | 71.3 gal/min | 52 gal (US) | - |
| Relief Valve Setting - Steering | 4351 psi | 4000 psi | - |
| Total Steering Angle | 86 ° | 70° | - |
| Steering Cycle Times - High Idle | 3.4 s | 3 s | - |
| Steering Cycle Times - Low Idle | 5.6 s | 5.2 s | - |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co | - |
Axles |
|||
| Front | Fixed | Fixed | - |
| Rear | Trunnion | Trunnion | - |
| Oscillation Angle | 13 ° | +/-12.5° | - |
Brakes |
|||
| Brakes | ISO 3450:2011 | ISO 3450:2011 | - |
Operator's Cab |
|||
| ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | - |
Service Refill Capacities |
|||
| Fuel Tank | 188 gal (US) | 141 gal (US) | - |
| Cooling System | 31.7 gal (US) | 27 gal (US) | - |
| Coolant (Validated by Test Cell Fill Quantities) | 33 gal (US) | - | - |
| Crankcase | 15.9 gal (US) | - | - |
| Diesel Exhaust Fluid Tank | 8.7 gal (US) | 5.5 gal (US) | - |
| Transmission | 31.7 gal (US) | 20 gal (US) | - |
| Transmission - Validated by Test Cell Fill Quantities | 29 gal (US) | - | - |
| Differential - Final Drives - Front | 49.1 gal (US) | 49 gal (US) | - |
| Differential - Final Drives - Rear | 49.1 gal (US) | 45 gal (US) | - |
| Hydraulic System Factory Fill | 125.5 gal (US) | - | - |
| Hydraulic System - Tank Only | 63.4 gal (US) | - | - |
| Engine Crankcase | - | 9 gal (US) | - |
| Note | - | Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a | - |
Sound Performance - Tier 4 Final / Stage V - Standard |
|||
| Operator Sound Pressure Level (ISO 6396:2008) | 73 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008) | 111 dB(A) | - | - |
Sound Performance - Tier 3 / Stage III - Standard |
|||
| Operator Sound Pressure Level (ISO 6396:2008) | 73 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008) | 112 dB(A) | - | - |
Dimensions (Approximate) - Standard Lift Linkage |
|||
| Ground to Top of ROPS | 13.8 ft | - | - |
| Ground to Top of Exhaust Stacks | 14.8 ft | - | - |
| Ground to Top of Hood | 10.9 ft | - | - |
| Rear Axle - Centerline to Bumper | 10.5 ft | - | - |
| Front Axle Centerline to Bucket Tip | 14 ft | - | - |
| Wheel Base | 14.9 ft | - | - |
| Maximum Overall Length | 39.3 ft | - | - |
| Ground to Lower Hitch Clearance | 1.9 ft | - | - |
| Clearance at Maximum Lift | 11.9 ft | - | - |
| B-Pin Height - Maximum Lift | 18 ft | - | - |
| Maximum Overall Height - Bucket Raised | 24.5 ft | - | - |
| Reach - Maximum Lift | 6.5 ft | - | - |
Dimensions (Approximate) - High Lift Linkage |
|||
| Ground to Top of ROPS | 13.8 ft | - | - |
| Ground to Top of Exhaust Stacks | 14.8 ft | - | - |
| Ground to Top of Hood | 10.9 ft | - | - |
| Rear Axle - Centerline to Bumper | 10.5 ft | - | - |
| Front Axle Centerline to Bucket Tip | 15.3 ft | - | - |
| Wheel Base | 14.9 ft | - | - |
| Maximum Overall Length | 40.7 ft | - | - |
| Ground to Lower Hitch Clearance | 1.9 ft | - | - |
| Clearance at Maximum Lift | 13.3 ft | - | - |
| B-Pin Height - Maximum Lift | 19.3 ft | - | - |
| Maximum Overall Height - Bucket Raised | 25.8 ft | - | - |
| Reach - Maximum Lift | 6.8 ft | - | - |
Buckets |
|||
| Bucket Capacities | 4.7-13 m3 (6.2-17 yd3) | 6.4-7.6 m3 (8.3-10 yd3) | - |
Hydraulic Cycle Times |
|||
| Rack Back | - | 3.8 s | - |
| Raise | - | 7.5 s | - |
| Dump | - | 3 s | - |
| Lower Float Down | - | 4.6 s | - |
| Total Hydraulic Cycle Time - Empty Bucket | - | 18.9 s | - |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
|||
| Operator Sound Level (ISO 6396) | - | 72 dB(A) | - |
| Machine Sound Level (ISO 6395) | - | 110 dB(A) | - |
| Note (1) | - | The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - |
| Note (2) | - | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - |
| Note (3) | - | The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - |
Dimensions (Approximate) - High Lift |
|||
| Ground to Top of ROPS | - | 13.5 ft | - |
| Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
| Ground to Top of Hood | - | 10.7 ft | - |
| Rear Axle - Centerline to Bumper | - | 10.3 ft | - |
| Front Axle Centerline to Bucket Tip | - | 15.7 ft | - |
| Wheel Base | - | 12.5 ft | - |
| Maximum Overall Length | - | 39.5 ft | - |
| Ground to Lower Hitch Clearance | - | 1.5 ft | - |
| Clearance at Maximum Lift | - | 12 ft | - |
| B-Pin Height - Maximum Lift | - | 18.7 ft | - |
| Maximum Overall Height - Bucket Raised | - | 25 ft | - |
| Reach - Maximum Lift | - | 7.7 ft | - |
| Note | - | Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. | - |
Sustainability |
|||
| Recyclability | - | 96% | - |
Add a Similar Product:
-
992 Wheel Loader Add
-
995 Wheel Loader Add
-
990 Wheel Loader Add
-
988 XE Wheel Loader Add
-
950 GC Wheel Loader | Front Loader Add
-
986 Wheel Loader Add
-
938M Aggregate Handler Small Wheel Loader Add
-
938M Waste Handler Small Wheel Loader Add
-
938M Small Wheel Loader Add
-
930M Aggregate Handler Small Wheel Loader Add