CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    988 Wheel Loader
    View Product
    930M Aggregate Handler Small Wheel Loader
    View Product Remove
    988 GC Wheel Loader
    View Product Remove
    995 Wheel Loader
    View Product Remove

    Engine
    Engine Power - ISO 14396:2002 580 hp - - -
    Engine Model Cat® C18 Cat® C7.1 Cat® C15 Cat® 3516E
    Rated Speed 1700/rpm - 2000 -
    Peak Power Speed 1500/rpm - 1600 -
    Gross Power - SAE J1995:2014 588 hp - 456 hp 1870 hp
    Net Power - SAE J1349:2011 538 hp - 373 hp -
    Bore 5.7 in 4 in 5.4 in 6.7 in
    Stroke 7.2 in 5 in 6.75 in 8.5 in
    Displacement 1105 in³ 427 in³ 927 in³ 4766 in³
    Peak Torque - 1,200 rpm 2104 lbf·ft - - -
    Torque Rise 58 % - 16% 39%
    Note (1) Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. - The power ratings apply when tested under the reference conditions for the specified standard.
    Note (2) Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
    Maximum Gross Power - 168 hp - -
    Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) - 601 ft·lbf - -
    Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) - 160 hp - -
    Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) - 586 ft·lbf - -
    Note (3) - No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. - The gross power advertised is with the fan at maximum speed.
    Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) - 168 hp - -
    Maximum Rated Gross Power - ISO 14396 - 168 hp - -
    Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) - 588 ft·lbf - -
    Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) - 573 ft·lbf - -
    Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) - 1600 r/min - -
    Emissions - The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards. U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
    Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) - 1800 r/min - -
    Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) - 164 hp - -
    Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) - 163 hp - -
    Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) - 170 hp - -
    Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) - 166 hp - -
    Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) - 587 ft·lbf - -
    Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) - 156 hp - -
    Maximum Rated Gross Power - ISO 14396 (metric) - 170 hp - -
    Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) - 158 hp - -
    Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*) - 572 ft·lbf - -
    Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) - 162 hp - -
    Net Power (Performance Power Mode: Range 1-4) - 1800 r/min - -
    Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) - 156 hp - -
    Net Power (Standard Power Mode: Range 1-3*) - 1600 r/min - -
    Engine Power - ISO 14396: 2002 - - 449 hp 1847 hp
    Peak Torque - 1,200 rpm - SAE J1995 - - 1778 ft·lbf 8549 lb/ft
    Net Power - SAE J1349 - Standard Ambient - - - 1739 hp
    Net Power - SAE J1349 - High Ambient - - - 1696 hp

    Operating Specifications
    Operating Weight 112574 lb - 116858 lb -
    Bucket Capacity Range 4.7-13 m3 (6.2-17 yd3) - 6.4-7.6 m3 (8.3-10 yd3) 17.2-43.6 m3 (22.3-57 yd3)
    Rated Payload - Quarry Face 12.5 t - 12.5 ton (US) -
    Rated Payload - Loose Material 16 t - - -
    Cat Truck Match - Standard 770 - 772 - - 785/789
    Cat Truck Match - High Lift 773 - 775 - 772/773/775 789/793/794
    Note (2) - ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. - -
    Note (1) - **Aggregate Handler machine equipped with full counterweight and optional guards. - -
    Full Turn Tip Load (2) - 9302 kg (20,507 lb)~ - -
    Full Turn Tip Load (1) - 9203 kg (20,289 lb)** - -
    Operating Weight - Standard - - - 543772 lb
    Operating Weight - High Lift - - - 547675 lb
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - - - 60 ton (US)
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - - - 50 ton (US)
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - - - 55 ton (US)
    Rated Payload - High Lift (Moderate to High Digging Resistance) - - - 50 ton (US)
    Note - - - *Please contact your local dealer to determine if your application is suitable for this increased rated payload.

    Transmission
    Transmission Type Cat planetary powershift - Cat planetary power shift Cat Planetary Power Shift
    Forward - 1 4 mile/h - 5 mile/h 4.6 mile/h
    Forward - 2 7.2 mile/h - 8 mile/h 8 mile/h
    Forward - 3 12.7 mile/h - - 13.6 mile/h
    Forward - 4 21.6 mile/h - - -
    Reverse - 1 4.7 mile/h - 5 mile/h 5 mile/h
    Reverse - 2 8.3 mile/h - 8 mile/h 8.8 mile/h
    Reverse - 3 14.4 mile/h - - 14.9 mile/h
    Direct Drive - Forward 1 Lock-up disabled - Lock-up disabled Lock-up disables
    Direct Drive - Forward 2 7.8 mile/h - 8 mile/h 8.7 mile/h
    Direct Drive - Forward 3 13.9 mile/h - 14 mile/h 15.2 mile/h
    Direct Drive - Forward 4 24.4 mile/h - 24 mile/h -
    Direct Drive - Reverse 1 5 mile/h - Lock-up disabled Lock-up disables
    Direct Drive - Reverse 2 8.9 mile/h - 9 mile/h 9.6 mile/h
    Direct Drive - Reverse 3 15.8 mile/h - 16 mile/h 16.8 mile/h
    Forward and Reverse - Range 3 - 17 mile/h - -
    Note - * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). - Travel speeds based on 58/85-57 tires.
    Forward and Reverse - Range 1* - 1-13 km/h (0.6-8 mph) - -
    Forward and Reverse - Range 2 - 8 mile/h - -
    Forward and Reverse - Range 4 - 25 mile/h - -
    Direct Drive - Reverse 4 - - 25.4 mile/h -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit EH- Positive Flow Control, Flow Sharing - EH - Load Sense Positive Flow Control
    Lift/Tilt System - Pump Variable displacement piston - - Variable Displacement Piston
    Maximum Flow at 1,400-1,860 rpm 153 gal/min - - -
    Relief Valve Setting - Lift/Tilt 4757 psi - 4598 psi 5004 psi
    Cylinders, Double Acting - Lift, Bore and Stroke 210 mm × 1050 mm (8.7 in × 41.3 in) - 190 mm x 1216 mm (7.5 in x 48 in) 370 × 1713 mm (14.6 × 67.4 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke 266 mm × 685 mm (8.7 in × 27 in) - 170 mm x 722 mm (6.7 in x 28.4 in) 310 × 1086 mm (12.2 × 42.8 in)
    Pilot System Variable displacement piston - Variable displacement piston Open Loop and Pressure Reducing
    Relief Valve Setting - Main 551 psi - - -
    Lift/Tilt System - - 2X x 145 cc Variable displacement piston -
    Maximum Flow at 2,165 rpm - - 159 gal/min -
    Tilt Cylinder - Stroke - - 27 in -
    Maximum Flow at 1,700 rpm Engine Speed - - - 541 gal/min

    Hydraulic Cycle Time (1,400-1,860 rpm)
    Rack Back 4.5 s - - -
    Raise 8 s - - -
    Dump 2.2 s - - -
    Lower Float Down 3.5 s - - -
    Total Hydraulic Cycle Time - Empty Bucket 18.2 s - - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing - Pilot, load sensing Pilot, Load Sensing
    Steering System - Pump Piston, variable displacement - Piston, variable displacement Piston, Variable Displacement
    Maximum Flow at 1,400-1,600 rpm 71.3 gal/min - - -
    Relief Valve Setting - Steering 4351 psi - 4000 psi -
    Total Steering Angle 86 ° - 70° 80 degrees
    Steering Cycle Times - High Idle 3.4 s - 3 s 4.3 s
    Steering Cycle Times - Low Idle 5.6 s - 5.2 s 7.6 s
    Maximum Flow - - 52 gal (US) -

    Air Conditioning System
    Air Conditioning • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co -

    Axles
    Front Fixed - Fixed Fixed
    Rear Trunnion - Trunnion Trunnion
    Oscillation Angle 13 ° - +/-12.5° 9°

    Brakes
    Brakes ISO 3450:2011 - ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards -

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008) 111 dB(A) - - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008)** 109 dB(A) - - -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” - - -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. - - -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -

    Sound Performance - Tier 3 / Stage IIIA
    Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008) 112 dB(A) - - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008)** 110 dB(A) - - -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” - - -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. - - -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -

    Service Refill Capacities
    Fuel Tank 188 gal (US) 51.5 Gal 141 gal (US) -
    Cooling System 31.7 gal (US) 7.9 gal (US) 27 gal (US) -
    Coolant (Validated by Test Cell Fill Quantities) 33 gal (US) - - -
    Crankcase 15.9 gal (US) - - -
    Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only) 8.7 gal (US) - - -
    Transmission 24.3 gal (US) - 20 gal (US) -
    Transmission - Validated by Test Cell Fill Quantities 29 gal (US) - - -
    Differential - Final Drives - Front 49.1 gal (US) - 49 gal (US) -
    Differential - Final Drives - Rear 49.1 gal (US) - 45 gal (US) -
    Hydraulic System Factory Fill 125.5 gal (US) - - -
    Hydraulic System - Tank Only 63.4 gal (US) - - -
    Note • All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester - Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a -
    Rear Axles - 6.6 gal (US) - -
    Front Axles - 6.9 gal (US) - -
    Hydraulic Tank - 23.8 gal (US) - -
    Engine Crankcase - 5.3 gal (US) 9 gal (US) -
    Diesel Exhaust Fluid (DEF) Tank - 5 gal (US) - -
    Transmission - Gear Box - 2.2 gal (US) - -
    Hydraulic System - Including Tank - 43.6 gal (US) - -
    Diesel Exhaust Fluid Tank - - 5.5 gal (US) -

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS 13.8 ft - - -
    Ground to Top of Exhaust Stacks 14.8 ft - - -
    Ground to Top of Hood 10.9 ft - - -
    Rear Axle - Centerline to Bumper 10.5 ft - - -
    Front Axle Centerline to Bucket Tip 14 ft - - -
    Wheel Base 14.9 ft - - -
    Maximum Overall Length 39.3 ft - - -
    Ground to Lower Hitch Clearance 1.9 ft - - -
    Clearance at Maximum Lift 11.9 ft - - -
    B-Pin Height - Maximum Lift 18 ft - - -
    Maximum Overall Height - Bucket Raised 24.5 ft - - -
    Reach - Maximum Lift 6.5 ft - - -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS 13.8 ft - - -
    Ground to Top of Exhaust Stacks 14.8 ft - - -
    Ground to Top of Hood 10.9 ft - - -
    Rear Axle - Centerline to Bumper 10.5 ft - - -
    Front Axle Centerline to Bucket Tip 15.3 ft - - -
    Wheel Base 14.9 ft - - -
    Maximum Overall Length 40.7 ft - - -
    Ground to Lower Hitch Clearance 1.9 ft - - -
    Clearance at Maximum Lift 13.3 ft - - -
    B-Pin Height - Maximum Lift 19.3 ft - - -
    Maximum Overall Height - Bucket Raised 25.8 ft - - -
    Reach - Maximum Lift 6.8 ft - - -

    Weights
    Operating Weight - 31848 lb - -
    Note (2) - ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. - -
    Note (1) - **Aggregate Handler machine equipped with full counterweight and optional guards. - -
    Operating Weight (1) - 14 374 kg (31,689 lb)** - -
    Operating Weight (2) - 14 446 kg (31,848 lb)~ - -

    Buckets
    Bucket Capacities - 2.5-5.0 m3 (3.3-6.5 yd3) 6.4-7.6 m3 (8.3-10 yd3) -

    Cab
    ROPS - ISO 3471:2008 - -
    Declared Sound Levels - Declared Sound Levels
    – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*
    – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*     		- -
    FOPS - ISO 3449:2005 LEVEL II - -
    Note (1) - * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. - -

    Loader Hydraulic System
    Lift Cylinder, Double Acting - Rod Diameter - 2.6 in - -
    Maximum Flow - Implement Pump - 4th Function Maximum Flow* - 42 gal/min - -
    Maximum Flow - Implement Pump - 50 gal/min - -
    Relief Pressure - Tilt Cylinder - 4061 psi - -
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) - 5.1/5.7 seconds - -
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) - 1.5/1.7 seconds - -
    Lift Cylinder, Double Acting - Stroke - 28.7 in - -
    Tilt Cylinder, Double Acting - Rod Diameter - 3.5 in - -
    Tilt Cylinder, Double Acting - Stroke - 21.9 in - -
    Lift Cylinder, Double Acting - Bore Diameter - 4.7 in - -
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure - 4061 psi - -
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure - 3771 psi - -
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) - 2.7/2.7 seconds - -
    Note (2) - Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). - -
    Tilt Cylinder, Double Acting - Bore Diameter - 5.9 in - -
    Note (1) - Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. - -
    Maximum Working Pressure - Implement Pump - 3771 psi - -
    Note (3) - * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. - -
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time - 9.3/10.1 seconds - -
    Maximum Flow - Implement Pump - 3rd Function Maximum Flow* - 50 gal/min - -

    Power Train
    Brakes - Parking - Spring applied hydraulically released - -
    Rear Axle - Traction Aid - Optional - Limited slip differential - -
    Front Axle - Fixed - -
    Brakes - Service - Inboard wet disc - -
    Note (2) - Offset rims available to meet European roading requirements. - -
    Front Axle - Traction Aid* - Locking differential (standard) - -
    Note (3) - *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M. - -
    Note (1) - Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. - -
    Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 - ± 10.5 degrees - -
    Rear Axle - Oscillating - -

    Steering
    Maximum Flow - Steering Pump - 34 gal/min - -
    Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited - 2.8 s - -
    Maximum Working Pressure - Steering Pump - 3500 psi - -
    Steering Cylinder, Double Acting - Bore Diameter - 2.8 in - -
    Steering Cylinder, Double Acting - Rod Diameter - 1.6 in - -
    Steering Cylinder, Double Acting - Stroke - 17.2 in - -
    Note (1) - Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. - -
    Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed - 2.4 s - -
    Note (2) - Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). - -

    Sustainability
    Recyclability - 94% 96% -

    Hydraulic Cycle Times
    Rack Back - - 3.8 s 4.9 s
    Raise - - 7.5 s 12.6 s
    Dump - - 3 s 3.1 s
    Lower Float Down - - 4.6 s 4.2 s
    Total Hydraulic Cycle Time - Empty Bucket - - 18.9 s -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - - 72 dB(A) -
    Machine Sound Level (ISO 6395) - - 110 dB(A) -
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS - - 13.5 ft -
    Ground to Top of Exhaust Stacks - - 13.3 ft -
    Ground to Top of Hood - - 10.7 ft -
    Rear Axle - Centerline to Bumper - - 10.3 ft -
    Front Axle Centerline to Bucket Tip - - 15.7 ft -
    Wheel Base - - 12.5 ft -
    Maximum Overall Length - - 39.5 ft -
    Ground to Lower Hitch Clearance - - 1.5 ft -
    Clearance at Maximum Lift - - 12 ft -
    B-Pin Height - Maximum Lift - - 18.7 ft -
    Maximum Overall Height - Bucket Raised - - 25 ft -
    Reach - Maximum Lift - - 7.7 ft -
    Note - - Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. -

    Complete System Fill
    Fuel Tank - Standard - - - 856 gal (US)
    Fuel Tank - With 24 hr Attachment - - - 1414 gal (US)
    Cooling System - - - 138 gal (US)
    Engine Crankcase - - - 76 gal (US)
    Transmission - - - 110 gal (US)
    Differential - Final Drives - Front - - - 220 gal (US)
    Differential - Final Drives - Rear - - - 200 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - - 270 gal (US)
    Hydraulic Tank - Steering and Braking - - - 100 gal (US)
    Oil Renewal System (ORS)* - - - 20 gal (US)
    Note - - - *Not available on Tier 4 Final/Stage V machines. Not available in all regions.

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - - - 109.4 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - - - 131 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - - - 127.4 °F

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - - 74 dB(A)
    Machine Sound Level (ISO 6395:2008) - - - 119 dB(A)
    Note - - - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - - 73 dB(A)
    Machine Sound Level (ISO 6395:2008) - - - 117 dB(A)
    Note - - - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - - - 28.8 ft
    Clearance at Maximum Lift - - - 19.8 ft
    Dump Angle at Maximum Lift - - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - - 21.9 ft
    Ground to Bumper Clearance - - - 4.4 ft
    Ground to Center of Axles - - - 6 ft
    Ground to Lower Hitch Clearance - - - 2.9 ft
    Ground to Top of Exhaust Stacks - - - 23.2 ft
    Ground to Top of Hood - - - 18.6 ft
    Ground to Top of ROPS - - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - - 39.3 ft
    Maximum Overall Length - - - 64.6 ft
    Note - - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - - 59.5 degrees
    Rack Back Angle - Carry - - - 47.7 degrees
    Rack Back Angle - Ground Level - - - 39.7 degrees
    Reach - Maximum Lift - - - 9.6 ft
    Rear Axle - Centerline to Bumper - - - 20.4 ft
    Tread Width - - - 14.1 ft
    Wheel Base - - - 22.3 ft
    Width - Over Tires - With Bulge - - - 18.8 ft

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - - - 31.6 ft
    Clearance at Maximum Lift - - - 22.6 ft
    Dump Angle at Maximum Lift - - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - - 24.2 ft
    Ground to Bumper Clearance - - - 4.4 ft
    Ground to Center of Axles - - - 6 ft
    Ground to Lower Hitch Clearance - - - 2.9 ft
    Ground to Top of Exhaust Stacks - - - 23.2 ft
    Ground to Top of Hood - - - 18.6 ft
    Ground to Top of ROPS - - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - - 42.1 ft
    Maximum Overall Length - - - 66.9 ft
    Note - - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - - 59.4 degrees
    Rack Back Angle - Carry - - - 53.5 degrees
    Rack Back Angle - Ground Level - - - 45 degrees
    Reach - Maximum Lift - - - 9.4 ft
    Rear Axle - Centerline to Bumper - - - 20.4 ft
    Tread Width - - - 14.1 ft
    Wheel Base - - - 22.3 ft
    Width - Over Tires - With Bulge - - - 18.8 ft
    Add a Similar Product:
    • 992 Wheel Loader Add
    • 990 Wheel Loader Add
    • 986 Wheel Loader Add
    • 988 XE Wheel Loader Add
    • 938M Waste Handler Small Wheel Loader Add
    • 950 GC Wheel Loader | Front Loader Add
    • 938M Small Wheel Loader Add
    • 938M Aggregate Handler Small Wheel Loader Add
    • 930M Waste Handler Small Wheel Loader Add
    • 930M Small Wheel Loader Add