Compare

Compare Equipment Go Back

Operating Specifications
	775 Off-Highway Truck View Product	796 AC Electric Drive Mining Truck View Product Remove	793F Mining Truck View Product Remove	775G Off-Highway Truck Bare Chassis View Product Remove	789 Next Generation View Product Remove
Nominal Payload Class (100%)	70.5 ton (US)	-	-	-	-
Top Speed - Loaded	41.6 mile/h	-	-	-	-
Maximum Working Payload (110%)	77.5 ton (US)	-	-	-	-
Target Payload (100%)	70.5 ton (US)	-	-	-	-
Maximum Allowable Payload (120%)*	84.6 ton (US)	-	-	-	-
Note (2)	* Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.	-	-	-	-
Note (1)	Capacity with Dual Slope body – no liner.	-	-	-	-
Body Capacity - SAE 2:1	55.23 yd³	-	-	-	-
Nominal Water Tank Capacity	-	-	-	15000 gal (US)	-
Engine
Engine Model	Cat® C27	Cat® C175-16	Cat® C175-16	Cat® C27	Cat® 3516E
Rated Engine Speed	1800 r/min	-	-	-	-
Gross Power - SAE J1995:2014	825 hp	-	-	-	2100 hp
Net Power - SAE J1349:2011	768 hp	-	-	-	1975 hp
Net Power - 80/1269/EEC	775 hp	-	-	-	-
Net Power - ISO 9249	775 hp	-	-	-	-
Bore	5.4 in	6.9 in	6.9 in	5.4 in	6.7 in
Stroke	6 in	8.7 in	8.7 in	6 in	8.5 in
Displacement	1648 in³	5187 in³	5187 in³	1648 in³	4766 in³
Engine Power - ISO 14396	812 hp	-	-	-	-
Note (2)	Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).	U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.	EPA Tier 4 Final / EU Stage V available for applicable markets.	-	Optional 1417 kW / 1,900 HP engine rating.
Net Torque	3148 ft-lb	-	-	-	-
Peak Torque - Speed	1200 r/min	-	-	-	-
Note (1)	Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard.	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.	-	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note (3)	No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent.	Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp	-	-	U.S. EPA Tier 4 Final / EU Stage V optional engine available for applicable markets.
Emissions	Meets EU Stage V emission standards.	-	Fuel Optimized	-	-
Gross Power - SAE J1995	-	3500 hp	2650 hp	825 hp	-
Net Power - SAE J1349	-	3405 hp	2478 hp	-	-
Rated Speed	-	1800 r/min	1750 r/min	-	1650 r/min
Emissions Rating	-	Fuel Optimized	-	-	Fuel Optimized
Rated Net Power - SAE J1349	-	-	-	683 hp	-
Note	-	-	-	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model.	-
Capacity - Dual Slope - 100% Fill Factor
Struck	42.7 yd³	-	-	-	-
Heaped (SAE 2:1)*	55.5 yd³	-	-	-	-
Note (1)	Contact your local Cat dealer for body recommendation.	-	-	-	-
Note (2)	*ISO 6483:1980	-	-	-	-
Capacity - Flat Floor - 100% Fill Factor
Struck	42.2 yd³	-	-	-	-
Heaped (SAE 2:1)*	55.2 yd³	-	-	-	-
Note (1)	Contact your local Cat dealer for body recommendation.	-	-	-	-
Note (2)	*ISO 6483:1980	-	-	-	-
Weight Distributions - Approximate
Front Axle - Empty	50 %	47 %	48 %	-	50%
Front Axle - Loaded	34 %	33 %	33 %	-	33%
Rear Axle - Empty	50 %	53 %	52 %	-	50%
Rear Axle - Loaded	66 %	67 %	67 %	-	67%
Note	-	Weight distributions optimized with Cat body.	-	-	-
Transmission
Forward - 1	6.6 mile/h	-	8 mile/h	6.6 mile/h	7.8 mile/h
Forward - 2	9.3 mile/h	-	10.8 mile/h	9.3 mile/h	10.6 mile/h
Forward - 3	12.6 mile/h	-	14.8 mile/h	12.6 mile/h	14.4 mile/h
Forward - 4	16.8 mile/h	-	19.9 mile/h	16.8 mile/h	19.4 mile/h
Forward - 5	22.8 mile/h	-	27.1 mile/h	22.8 mile/h	26.3 mile/h
Forward - 6	30.7 mile/h	-	37.3 mile/h	30.7 mile/h	35.5 mile/h
Forward - 7	41.6 mile/h	-	-	41.6 mile/h	-
Reverse	8.7 mile/h	-	7.3 mile/h	8.7 mile/h	7.3 mile/h
Note	Maximum travel speeds with standard 24.00R35 (E4) tires.	-	-	Maximum travel speeds with standard 24.00R35 (E4) tires	-
Top Speed - Loaded	-	-	37.3 mile/h	-	35.5 mile/h
Final Drives
Differential Ratio	3.64:1	-	1.8:1	-	2.35:1
Planetary Ratio	4.80:1	-	16:01	-	10.83:1
Total Reduction Ratio	17.49:1	-	26.8:1	-	25.46:1
Type	-	-	-	-	Double reduction, planetary with full floating axles
Brakes
Brake Surface - Front	257 in²	-	13921 in²	257 in²	-
Brake Surface - Rear	9497 in²	-	20847 in²	9497 in²	-
Brake Standards	ISO 3450:2011	-	-	-	-
Standards	-	-	J-ISO 3450 JAN88, ISO 3450:1996	-	-
Service Refill Capacities
Fuel Tank	210 gal (US)	1300 gal (US)	750 gal (US)	-	1000 gal (US)
Cooling System	45 gal (US)	211 gal (US)	284 gal (US)	45 gal (US)	180 gal (US)
Differential - Final Drives	38 gal (US)	-	-	38 gal (US)	-
Steering Tank	9.5 gal (US)	-	-	-	-
Steering System - Including Tank	14 gal (US)	-	77 gal (US)	14 gal (US)	-
Brake Hoist System	85 gal (US)	-	-	85 gal (US)	169 gal (US)
Torque Converter - Transmission System - LRC	16 gal (US)	-	-	-	-
Crankcase	24 gal (US)	82 gal (US)	82 gal (US)	24 gal (US)	77 gal (US)
Brake/Hoist Hydraulic Tank	46.5 gal (US)	-	-	46.5 gal (US)	-
Torque Converter - Transmission System - HRC	18 gal (US)	-	-	-	-
Fuel Tank (Tier 4)	-	1200 gal (US)	-	-	55 gal (US)
Diesel Exhaust Fluid Tank	-	100 gal (US)	62 gal (US)	-	62 gal (US)
Front Wheels - Each	-	7 gal (US)	-	-	5.8 gal (US)
Final Drive - Each	-	67 gal (US)	-	-	-
Hydraulic Tank	-	296 gal (US)	-	-	-
Hydraulic System - Including Tank	-	385 gal (US)	-	-	-
Grease Tank	-	90 lb	-	-	-
Note (1)	-	DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option	DEF Tank only available for EPA Tier 4 engine option.	-	-
Fuel Tank - Optional	-	-	1300 gal (US)	-	-
Rear Axle - Housing	-	-	260 gal (US)	-	-
Brake Hoist System - Includes Tank	-	-	347 gal (US)	-	347 gal (US)
Torque Converter - Transmission Sump	-	-	27 gal (US)	-	-
Torque Converter/Transmission System - Including Sump	-	-	55 gal (US)	-	-
Fuel Tank Capacity	-	-	-	210 gal (US)	-
Fuel Tank - Standard	-	-	-	-	550 gal (US)
Differentials	-	-	-	-	161 gal (US)
Steering System	-	-	-	-	42 gal (US)
Steering System - Includes Tank	-	-	-	-	46 gal (US)
Torque Converter - Transmission System - Including Sump	-	-	-	-	55 gal (US)
Body Hoists
Pump Flow - High Idle	118 gal/min	257.3 gal/min	224 gal/min	-	106.5 gal/min
Relief Valve Setting - Raise	2502 psi	3029 psi	2955 psi	-	2749 psi
Relief Valve Setting - Lower	500 psi	-	-	-	-
Body Raise Time - High Idle	10 s	21 s	19 s	-	14 s
Body Lower Time - Float	14 s	22 s	20 s	-	16 s
Body Power Down - High Idle	14 s	-	17.5 s	-	-
Type	-	Twin, two-stage hydraulic cylinders with snubbing valve.	Twin, two-stage hydraulic cylinders with snubbing valve	-	Twin, two-stage hydraulic cylinders with snubbing valve.
Body Power Down- High Idle	-	17.5 s	-	-	-
Note (1)	-	Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.	-	-	-
Note (2)	-	Power raise in both stages; power down capability in both stages.	-	-	-
Note (3)	-	Automatic body-lower modulation reduces impact on frame.	-	-	-
Weights - Approximate
Maximum Gross Vehicle Weight	246503 lb	-	-	-	-
Nominal Rated Payload	-	360 ton (US)	256 ton (US)	-	213 ton (US)
Rated Gross Machine Weight	-	1270000 lb	851000 lb	-	715000 lb
Chassis Weight	-	448415 lb	265639 lb	-	-
Body Weight Range	-	38 833 – 42 907 kg (85,611 – 94,594 lb)	-	-	-
Note (1)	-	Consult your tire manufacturer for maximum tire load.	Consult your tire manufacturer for maximum tire load	-	Consult your tire manufacturer for maximum tire load
Note (2)	-	Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.	Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.	-	Chassis weight with full fuel and fluids, standard and mandatory attachments, hoist, body mounting group, rims, and tires.
Note (3)	-	Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations	Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations.	-	-
Body Weight	-	-	67682 lb	-	60406 lb
Suspension
Empty Loaded Cylinder Stroke Front	9.2 in	-	-	-	-
Rear Axle - Oscillation	8.1°	-	-	-	-
Empty Loaded Cylinder Stroke Rear	5.8 in	-	-	-	-
Type	-	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments	-	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top and bottom double shear clevis attachments
Effective Cylinder Stroke - Front	-	4 in	5.1 in	-	4.12 in
Effective Cylinder Stroke - Rear	-	2 in	4.2 in	-	3.67 in
Rear axle - Oscillation	-	+/- 5.32 degrees	±4.9 degrees	-	+/- 5 degrees
Tires
Note (2)	Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.	-	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Note (1)	Productive capabilities of the 775G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.	Quick Change Rims optional.	Extended life wheel stations optional.	-	Quick Change Rims optional
Standard Tire	24.00R35 (E4)	-	-	-	-
Standard Tires	-	59/80 R63	40.00 R57	-	37 R57
Rims	-	44" x 63"	29" or 32"	-	29” x 57” Rims
Note	-	-	Quick Change Rims optional.	-	-
Optional Tires	-	-	-	-	40 R57
Optional Tire	-	-	-	-	42/90 R57
ROPS
FOPS Standards	Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria.	-	-
ROPS Standards	Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.	-	-	-	-
Tractor ROPS	-	-	-	85288 lb	-
Sound
Sound Standards (1)	The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with t	-	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.	-	Operator sound pressure level, 77 dB(A) with direct drive and 75 dB(A) with optional clutch, tested to ISO 6396:2008.
Sound Standards (2)	The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A).	-	-	-	-
Sound Standards (3)	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.	-	-	-	-
Sound Standards	-	The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.	The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed.	-	-
Steering
Turning Diameter - Front	77.1 ft	106.3 ft	93.2 ft	-	-
Steering Standards	ISO 5010:2007	ISO 5010:2019	SAE J15111 OCT90, ISO 5010:1992	ISO 5010:2007	ISO 5010:2019
Steer Angle	31 °	39 °	36 °	31 °	36.07 °
Turning Circle - Clearance Diameter	85.6 ft	-	-	85.6 ft	-
Note	-	Turning Diameter (ISO 7457:1997)	-	-	-
Turning Diameter	-	-	-	77.1 ft	-
Sustainability
Recyclability	98%	-	-	-	-
AC Drive System
Total Reduction Ratio	-	35:01:00	-	-	-
Top Speed - Loaded	-	40 mile/h	-	-	-
Generator/Alternator	-	Cat brushless, engine mounted, dual bearing	-	-	-
Controls	-	Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration	-	-	-
Wheel Motor	-	Cat AC induction, rear axle mounted	-	-	-
Cooling System	-	Cat variable speed, hydraulically driven cooling system	-	-	-
Braking System
Service Brakes	-	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated	-	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Front Wet Disc Brake Surface Area	-	20378 in²	13921 in³	-	12662 in²
Rear - Wet Disc Brake Surface Area	-	30750 in²	20847 in³	-	20861 in²
Standards	-	Service and Secondary: ISO 3450:2011	(Service and Secondary): ISO 3450:1996	-	(Service and Secondary) ISO 3450:2011
Parking Brake	-	Four-corner, Multi-disc, Spring Applied, Hydraulically Released	-	-	Four-corner, Multi-disc, Spring applied, Hydraulically Released
Load Brake	-	Rear service brakes	Rear service brakes	-	-
Dynamic Retarding Power - Continuous	-	5480 hp	-	-	-
Note	-	Anti-Lock Brake System (ABS) optional with CMD package	Anti-Lock Brake System (ABS) optional with CMD package	-	-
Parking Brakes	-	-	Four-corner, Multi-disc, Spring Applied, Hydraulically Released	-	-
Capacity - HE Body - 100% fill factor
Struck	-	97-153 m³ (127-200 yd³)	-	-	-
Heaped (SAE 2:1)	-	186-237 m³ (243-310 yd³)	-	-	-
Note	-	Consult your local Cat dealer for body recommendations.	-	-	-
Cab
Air Conditioning	-	HFC - 134A refrigerant: 21,600 Btu/h	Air Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr	-	(HFC - 134A refrigerant) 24,500 Btu/hr
Heater / Defroster	-	24600 Btu/h	38900 Btu/h	-	33300 Btu/h
Note	-	Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.	Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.	-	-
ROPS Standards (1)	-	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.	The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396.	-	-
FOPS Standards	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.	FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria.	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.
ROPS Standards (2)	-	-	ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria.	-	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
Dimensions (Approximate)
Height - Top of ROPS	-	22.05 ft	-	-	5550 mm
Overall Length	-	51.44 ft	-	-	12970 mm
Wheel Base	-	21.9 ft	-	-	57000 mm
Rear Axle - Tail	-	16.07 ft	-	-	3856 mm
Dump Clearance - Empty	-	5.72 ft	-	-	-
Loading Height - Empty	-	23.85 ft	-	-	6147 mm
Overall Height - Body Raised	-	48.85 ft	-	-	11534 mm
Centerline Front Tire Width	-	23.06 ft	-	-	5410 mm
Front Axle Clearance - Loaded	-	2.81 ft	-	-	-
Overall Canopy Width (with rock deflectors)	-	33.15 ft	-	-	-
Outside Body/Canopy Width (without rock deflectors)	-	31.62 ft	-	-	-
Inside Body Width	-	29.44 ft	-	-	6920 mm
Front Canopy Height - Empty	-	26.01 ft	-	-	-
Rear Axle Clearance - Loaded	-	2.8 ft	-	-	-
Centerline of Rear Dual Tire Width	-	19.5 ft	-	-	4695 mm
Overall Tire Width - Empty	-	30.27 ft	-	-	-
Note	-	Dimensions listed includes canopy deflectors	-	-	-
Overall Body Length	-	-	-	-	12945 mm
Inside Body Length	-	-	-	-	8730 mm
Ground Clearance	-	-	-	-	1304 mm
Dump Clearance	-	-	-	-	1585 mm
Rear Sidewall Height	-	-	-	-	1010 mm
Inside Body Depth - Maximum	-	-	-	-	3075 mm
Operating Width	-	-	-	-	7822 mm
Engine Guard Clearance	-	-	-	-	1290 mm
Overall Canopy Width	-	-	-	-	7769 mm
Outside Body Width	-	-	-	-	7123 mm
Front Canopy Height	-	-	-	-	6739 mm
Rear Axle - Clearance	-	-	-	-	1263 mm
Overall Tire Width	-	-	-	-	7120 mm
Capacity - HP Body - 100% Fill Factor
Note (1)	-	-	Contact your local Cat dealer for body recommendation.	-	Consult your local Cat dealer for body recommendations
Struck	-	-	112.6-151 m³ (147-197.5 yd³)	-	77 m3(101 yd3)
Heaped (SAE 2:1)*	-	-	162-191 m³ (212-250 yd³)	-	187
Note (2)	-	-	*ISO 6483:1980	-	-
Capacity - MSD II - 100% Fill Factor
Note	-	-	Contact your local Cat dealer for body recommendation.	-	-
Struck	-	-	112-142 m³ (146-186 yd³)	-	-
Heaped (SAE 2:1)	-	-	159-190 m3 (209-250 yd3)	-	-
Weights
LRC Bare Chassis Weight without Hoist	-	-	-	75118 lb	-
LRC Bare Chassis Weight with Hoist	-	-	-	76326 lb	-
LRC Gross Vehicle Weight (Target) without Hoist	-	-	-	246503 lb	-
LRC Gross Vehicle Weight (Target) with Hoist	-	-	-	246503 lb	-
HRC Bare Chassis Weight without Hoist	-	-	-	76573 lb	-
HRC Bare Chassis Weight with Hoist	-	-	-	77781 lb	-
HRC Gross Vehicle Weight (Target) without Hoist	-	-	-	246503 lb	-
HRC Gross Vehicle Weight (Target) with Hoist	-	-	-	246503 lb	-
Note	-	-	-	LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.	-

Compare Equipment Go Back

775 Off-Highway Truck

796 AC Electric Drive Mining Truck

793F Mining Truck

775G Off-Highway Truck Bare Chassis

789 Next Generation

Operating Specifications

Engine

Capacity - Dual Slope - 100% Fill Factor

Capacity - Flat Floor - 100% Fill Factor

Weight Distributions - Approximate

Transmission

Final Drives

Brakes

Service Refill Capacities

Body Hoists

Weights - Approximate

Suspension

Tires

ROPS

Sound

Steering

Sustainability

AC Drive System

Braking System

Capacity - HE Body - 100% fill factor

Cab

Dimensions (Approximate)

Capacity - HP Body - 100% Fill Factor

Capacity - MSD II - 100% Fill Factor

Weights

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us