Compare

Compare Equipment Go Back

Operating Specifications
	775 Off-Highway Truck View Product	793F Mining Truck View Product Remove	775G Off-Highway Truck Bare Chassis View Product Remove	789 Next Generation View Product Remove	772 (07) Off-Highway Truck View Product Remove	785 Mining Truck (LRC, Tier 4 Final / EU Stage V) View Product Remove
Nominal Payload Class (100%)	70.5 ton (US)	-	-	-	51.6 ton (US)	-
Top Speed - Loaded	41.6 mile/h	-	-	-	49.2 mile/h	-
Maximum Working Payload (110%)	77.5 ton (US)	-	-	-	-	-
Target Payload (100%)	70.5 ton (US)	-	-	-	-	-
Maximum Allowable Payload (120%)*	84.6 ton (US)	-	-	-	-	-
Note (2)	* Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.	-	-	-	-	-
Note (1)	Capacity with Dual Slope body – no liner.	-	-	-	-	-
Body Capacity - SAE 2:1	55.23 yd³	-	-	-	40.8 yd³	-
Nominal Water Tank Capacity	-	-	15000 gal (US)	-	-	-
Maximum Payload Class (110%)	-	-	-	-	56.7 ton (US)	-
Target Payload Capacity	-	-	-	-	51.6 ton (US)	-
Not to Exceed Payload (120%)	-	-	-	-	61.9 ton (US)	-
Body Capacity (SAE 2:1)**	-	-	-	-	40.8 yd³	-
Engine
Engine Model	Cat® C27	Cat® C175-16	Cat® C27	Cat® 3516E	Cat® C18	Cat 3512E
Rated Engine Speed	1800 r/min	-	-	-	1700 r/min	-
Gross Power - SAE J1995:2014	825 hp	-	-	2100 hp	605 hp	-
Net Power - SAE J1349:2011	768 hp	-	-	1975 hp	550 hp	-
Net Power - 80/1269/EEC	775 hp	-	-	-	-	-
Net Power - ISO 9249	775 hp	-	-	-	550 hp	-
Bore	5.4 in	6.9 in	5.4 in	6.7 in	5.7 in	6.7 in
Stroke	6 in	8.7 in	6 in	8.5 in	7.2 in	8.5 in
Displacement	1648 in³	5187 in³	1648 in³	4766 in³	1105 in³	3573 in³
Engine Power - ISO 14396	812 hp	-	-	-	598 hp	-
Note (2)	Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).	EPA Tier 4 Final / EU Stage V available for applicable markets.	-	Optional 1417 kW / 1,900 HP engine rating.	-	U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
Net Torque	3148 ft-lb	-	-	-	-	-
Peak Torque - Speed	1200 r/min	-	-	-	-	-
Note (1)	Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard.	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.	-	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.	-	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note (3)	No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent.	-	-	U.S. EPA Tier 4 Final / EU Stage V optional engine available for applicable markets.	-	Additional fuel optimized selectable power ratings: 1,450 hp
Emissions	Meets EU Stage V emission standards.	Fuel Optimized	-	-	-	-
Gross Power - SAE J1995	-	2650 hp	825 hp	-	-	1600 hp
Net Power - SAE J1349	-	2478 hp	-	-	-	1509 hp
Rated Speed	-	1750 r/min	-	1650 r/min	-	-
Rated Net Power - SAE J1349	-	-	683 hp	-	-	-
Note	-	-	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model.	-	-	-
Emissions Rating	-	-	-	Fuel Optimized	-	Fuel Optimized
Number of Cylinders	-	-	-	-	6	-
Net Torque - SAE J1349	-	-	-	-	2221 ft-lb	-
Capacity - Dual Slope - 100% Fill Factor
Struck	42.7 yd³	-	-	-	31.3 yd³	-
Heaped (SAE 2:1)*	55.5 yd³	-	-	-	-	-
Note (1)	Contact your local Cat dealer for body recommendation.	-	-	-	-	-
Note (2)	*ISO 6483:1980	-	-	-	-	-
Heaped 2:1 (SAE)	-	-	-	-	40.8 yd³	-
Capacity - Flat Floor - 100% Fill Factor
Struck	42.2 yd³	-	-	-	31.3 yd³	-
Heaped (SAE 2:1)*	55.2 yd³	-	-	-	-	-
Note (1)	Contact your local Cat dealer for body recommendation.	-	-	-	-	-
Note (2)	*ISO 6483:1980	-	-	-	-	-
Heaped 2:1 (SAE)	-	-	-	-	40.9 yd³	-
Weight Distributions - Approximate
Front Axle - Empty	50 %	48 %	-	50%	51.4 %	48%
Front Axle - Loaded	34 %	33 %	-	33%	34.2 %	33%
Rear Axle - Empty	50 %	52 %	-	50%	48.6 %	52%
Rear Axle - Loaded	66 %	67 %	-	67%	65.8 %	67%
Note	-	-	-	-	-	Weight distributions optimized with Cat body.
Transmission
Forward - 1	6.6 mile/h	8 mile/h	6.6 mile/h	7.8 mile/h	8 mile/h	7.4 mile/h
Forward - 2	9.3 mile/h	10.8 mile/h	9.3 mile/h	10.6 mile/h	10.9 mile/h	10 mile/h
Forward - 3	12.6 mile/h	14.8 mile/h	12.6 mile/h	14.4 mile/h	14.8 mile/h	13.7 mile/h
Forward - 4	16.8 mile/h	19.9 mile/h	16.8 mile/h	19.4 mile/h	19.8 mile/h	18.5 mile/h
Forward - 5	22.8 mile/h	27.1 mile/h	22.8 mile/h	26.3 mile/h	26.9 mile/h	25 mile/h
Forward - 6	30.7 mile/h	37.3 mile/h	30.7 mile/h	35.5 mile/h	36.2 mile/h	35.6 mile/h
Forward - 7	41.6 mile/h	-	41.6 mile/h	-	49.2 mile/h	-
Reverse	8.7 mile/h	7.3 mile/h	8.7 mile/h	7.3 mile/h	10.4 mile/h	7.2 mile/h
Note	Maximum travel speeds with standard 24.00R35 (E4) tires.	-	Maximum travel speeds with standard 24.00R35 (E4) tires	-	-	Maximum travel speeds with standard 33.00-R51 tires.
Top Speed - Loaded	-	37.3 mile/h	-	35.5 mile/h	-	35.6 mile/h
Final Drives
Differential Ratio	3.64:1	1.8:1	-	2.35:1	2.74:1	2:10:01
Planetary Ratio	4.80:1	16:01	-	10.83:1	4.80:1	10.83:1
Total Reduction Ratio	17.49:1	26.8:1	-	25.46:1	13.14:1	22.75:1
Type	-	-	-	Double reduction, planetary with full floating axles	-	Double reduction, planetary with full floating axles.
Brakes
Brake Surface - Front	257 in²	13921 in²	257 in²	-	216 in²	-
Brake Surface - Rear	9497 in²	20847 in²	9497 in²	-	7794 in²	-
Brake Standards	ISO 3450:2011	-	-	-	ISO 3450:2011	-
Standards	-	J-ISO 3450 JAN88, ISO 3450:1996	-	-	-	-
Service Refill Capacities
Fuel Tank	210 gal (US)	750 gal (US)	-	1000 gal (US)	140 gal (US)	410 gal (US)
Cooling System	45 gal (US)	284 gal (US)	45 gal (US)	180 gal (US)	33 gal (US)	126 gal (US)
Differential - Final Drives	38 gal (US)	-	38 gal (US)	-	47 gal (US)	139 gal (US)
Steering Tank	9.5 gal (US)	-	-	-	14.5 gal (US)	29 gal (US)
Steering System - Including Tank	14 gal (US)	77 gal (US)	14 gal (US)	-	23 gal (US)	-
Brake Hoist System	85 gal (US)	-	85 gal (US)	169 gal (US)	60 gal (US)	-
Torque Converter - Transmission System - LRC	16 gal (US)	-	-	-	-	-
Crankcase	24 gal (US)	82 gal (US)	24 gal (US)	77 gal (US)	17 gal (US)	54 gal (US)
Brake/Hoist Hydraulic Tank	46.5 gal (US)	-	46.5 gal (US)	-	38 gal (US)	-
Torque Converter - Transmission System - HRC	18 gal (US)	-	-	-	-	-
Fuel Tank - Optional	-	1300 gal (US)	-	-	-	-
Diesel Exhaust Fluid Tank	-	62 gal (US)	-	62 gal (US)	-	36 gal (US)
Rear Axle - Housing	-	260 gal (US)	-	-	-	-
Brake Hoist System - Includes Tank	-	347 gal (US)	-	347 gal (US)	-	143 gal (US)
Torque Converter - Transmission Sump	-	27 gal (US)	-	-	-	-
Torque Converter/Transmission System - Including Sump	-	55 gal (US)	-	-	-	-
Note (1)	-	DEF Tank only available for EPA Tier 4 engine option.	-	-	-	-
Fuel Tank Capacity	-	-	210 gal (US)	-	-	-
Fuel Tank - Standard	-	-	-	550 gal (US)	-	-
Fuel Tank (Tier 4)	-	-	-	55 gal (US)	-	-
Front Wheels - Each	-	-	-	5.8 gal (US)	-	7.1 gal (US)
Differentials	-	-	-	161 gal (US)	-	-
Steering System	-	-	-	42 gal (US)	-	-
Steering System - Includes Tank	-	-	-	46 gal (US)	-	31 gal (US)
Torque Converter - Transmission System - Including Sump	-	-	-	55 gal (US)	-	46 gal (US)
Torque Converter - Transmission System	-	-	-	-	17 gal (US)	-
DEF Tank	-	-	-	-	6 gal (US)	-
Brake/Hoist Tank	-	-	-	-	-	135 gal (US)
Body Hoists
Pump Flow - High Idle	118 gal/min	224 gal/min	-	106.5 gal/min	112 gal/min	223 gal/min
Relief Valve Setting - Raise	2502 psi	2955 psi	-	2749 psi	2750 psi	2500 psi
Relief Valve Setting - Lower	500 psi	-	-	-	500 psi	-
Body Raise Time - High Idle	10 s	19 s	-	14 s	8 s	15 s
Body Lower Time - Float	14 s	20 s	-	16 s	10 s	15.6 s
Body Power Down - High Idle	14 s	17.5 s	-	-	10 s	-
Type	-	Twin, two-stage hydraulic cylinders with snubbing valve	-	Twin, two-stage hydraulic cylinders with snubbing valve.	-	Twin, two-stage hydraulic cylinders with snubbing valve.
Body Power Down- High Idle	-	-	-	-	-	15.5 s
Weights - Approximate
Maximum Gross Vehicle Weight	246503 lb	-	-	-	-	-
Nominal Rated Payload	-	256 ton (US)	-	213 ton (US)	-	-
Rated Gross Machine Weight	-	851000 lb	-	715000 lb	-	-
Chassis Weight	-	265639 lb	-	-	59223 lb	-
Body Weight	-	67682 lb	-	60406 lb	17306 lb	57779 lb
Note (1)	-	Consult your tire manufacturer for maximum tire load	-	Consult your tire manufacturer for maximum tire load	-	Consult your tire manufacturer for maximum tire load
Note (2)	-	Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.	-	Chassis weight with full fuel and fluids, standard and mandatory attachments, hoist, body mounting group, rims, and tires.	-	Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
Note (3)	-	Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations.	-	-	-	Body weight varies depending on body selection and configuration.
Target Gross Machine Operating Weight	-	-	-	-	181000 lb	-
Target Gross Machine Weight	-	-	-	-	181000 lb	-
Nominal Rated Payload (36.00R51 Tires)	-	-	-	-	-	162 ton (US)
Rated Gross Machine Weight (36.00R51 tires)	-	-	-	-	-	564000 lb
Nominal Rated Payload (33.00R51 Tires)	-	-	-	-	-	158 ton (US)
Rated Gross Machine Weight (33.00R51 tires)	-	-	-	-	-	550000 lb
Chassis Weight (33.00R51 Tires)	-	-	-	-	-	186799 lb
Chassis Weight (36.00R51 Tires)	-	-	-	-	-	193192 lb
Suspension
Empty Loaded Cylinder Stroke Front	9.2 in	-	-	-	9.2 in	-
Rear Axle - Oscillation	8.1°	-	-	-	-	-
Empty Loaded Cylinder Stroke Rear	5.8 in	-	-	-	5.8 in	-
Type	-	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments	-	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top and bottom double shear clevis attachments	-	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
Effective Cylinder Stroke - Front	-	5.1 in	-	4.12 in	-	12.6 in
Effective Cylinder Stroke - Rear	-	4.2 in	-	3.67 in	-	6.5 in
Rear axle - Oscillation	-	±4.9 degrees	-	+/- 5 degrees	8.9 °	+/- 5.4 degrees
Tires
Note (2)	Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.	-	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.	-	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Note (1)	Productive capabilities of the 775G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.	Extended life wheel stations optional.	-	Quick Change Rims optional	-	Quick Change Rims optional.
Standard Tire	24.00R35 (E4)	-	-	-	21.00R33 (E4)	33.00R51
Standard Tires	-	40.00 R57	-	37 R57	-	-
Rims	-	29" or 32"	-	29” x 57” Rims	-	610 mm (24") Rims (standard). 660 mm (26") Rims (optional).
Note	-	Quick Change Rims optional.	-	-	-	-
Optional Tires	-	-	-	40 R57	-	-
Optional Tire	-	-	-	42/90 R57	-	36.00R51
ROPS
FOPS Standards	Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.	FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria.	-	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria.	-
ROPS Standards	Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.	-	-	-	ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.	-
Tractor ROPS	-	-	85288 lb	-	-	-
Sound
Sound Standards (1)	The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with t	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.	-	Operator sound pressure level, 77 dB(A) with direct drive and 75 dB(A) with optional clutch, tested to ISO 6396:2008.	Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.	-
Sound Standards (2)	The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A).	-	-	-	Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A).	-
Sound Standards (3)	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.	-	-	-	Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.	-
Sound Standards	-	The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed.	-	-	-	The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008.
Steering
Turning Diameter - Front	77.1 ft	93.2 ft	-	-	57.7 ft	-
Steering Standards	ISO 5010:2007	SAE J15111 OCT90, ISO 5010:1992	ISO 5010:2007	ISO 5010:2019	ISO 5010:2007	ISO 5010:2019
Steer Angle	31 °	36 °	31 °	36.07 °	40.5 °	25.1 °
Turning Circle - Clearance Diameter	85.6 ft	-	85.6 ft	-	66.6 ft	-
Turning Diameter	-	-	77.1 ft	-	-	-
Turning Diameter - ISO 7457:1997 (33.00R51 tires)	-	-	-	-	-	96.6 ft
Sustainability
Recyclability	98%	-	-	-	-	-
Capacity - HP Body - 100% Fill Factor
Note (1)	-	Contact your local Cat dealer for body recommendation.	-	Consult your local Cat dealer for body recommendations	-	-
Struck	-	112.6-151 m³ (147-197.5 yd³)	-	77 m3(101 yd3)	-	-
Heaped (SAE 2:1)*	-	162-191 m³ (212-250 yd³)	-	187	-	-
Note (2)	-	*ISO 6483:1980	-	-	-	-
Braking System
Service Brakes	-	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated	-	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated	-	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Front Wet Disc Brake Surface Area	-	13921 in³	-	12662 in²	-	9487 in²
Rear - Wet Disc Brake Surface Area	-	20847 in³	-	20861 in²	-	13908 in²
Standards	-	(Service and Secondary): ISO 3450:1996	-	(Service and Secondary) ISO 3450:2011	-	Service and Secondary: ISO 3450:2011
Parking Brakes	-	Four-corner, Multi-disc, Spring Applied, Hydraulically Released	-	-	-	-
Load Brake	-	Rear service brakes	-	-	-	-
Note	-	Anti-Lock Brake System (ABS) optional with CMD package	-	-	-	-
Parking Brake	-	-	-	Four-corner, Multi-disc, Spring applied, Hydraulically Released	-	Four corner, multi disc, spring applied, hydraulically released
Cab
Air Conditioning	-	Air Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr	-	(HFC - 134A refrigerant) 24,500 Btu/hr	-	HFC - 134A refrigerant: 24,500 Btu/h
Heater / Defroster	-	38900 Btu/h	-	33300 Btu/h	-	33300 Btu/h
Note	-	Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.	-	-	-	-
ROPS Standards (1)	-	The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396.	-	-	-	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
ROPS Standards (2)	-	ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria.	-	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.	-	-
FOPS Standards	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria.	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.
Capacity - MSD II - 100% Fill Factor
Note	-	Contact your local Cat dealer for body recommendation.	-	-	-	Consult your local Cat dealer for body recommendations.
Struck	-	112-142 m³ (146-186 yd³)	-	-	-	72 m^3 / 94 yd^3
Heaped (SAE 2:1)	-	159-190 m3 (209-250 yd3)	-	-	-	99 m^3 / 129 yd^3
Weights
LRC Bare Chassis Weight without Hoist	-	-	75118 lb	-	-	-
LRC Bare Chassis Weight with Hoist	-	-	76326 lb	-	-	-
LRC Gross Vehicle Weight (Target) without Hoist	-	-	246503 lb	-	-	-
LRC Gross Vehicle Weight (Target) with Hoist	-	-	246503 lb	-	-	-
HRC Bare Chassis Weight without Hoist	-	-	76573 lb	-	-	-
HRC Bare Chassis Weight with Hoist	-	-	77781 lb	-	-	-
HRC Gross Vehicle Weight (Target) without Hoist	-	-	246503 lb	-	-	-
HRC Gross Vehicle Weight (Target) with Hoist	-	-	246503 lb	-	-	-
Note	-	-	LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.	-	-	-
Dimensions (Approximate)
Height - Top of ROPS	-	-	-	5550 mm	-	-
Overall Body Length	-	-	-	12945 mm	-	-
Inside Body Length	-	-	-	8730 mm	-	-
Overall Length	-	-	-	12970 mm	-	-
Wheel Base	-	-	-	57000 mm	-	-
Rear Axle - Tail	-	-	-	3856 mm	-	-
Ground Clearance	-	-	-	1304 mm	-	-
Dump Clearance	-	-	-	1585 mm	-	-
Loading Height - Empty	-	-	-	6147 mm	-	-
Rear Sidewall Height	-	-	-	1010 mm	-	-
Inside Body Depth - Maximum	-	-	-	3075 mm	-	-
Overall Height - Body Raised	-	-	-	11534 mm	-	-
Operating Width	-	-	-	7822 mm	-	-
Centerline Front Tire Width	-	-	-	5410 mm	-	-
Engine Guard Clearance	-	-	-	1290 mm	-	-
Overall Canopy Width	-	-	-	7769 mm	-	-
Outside Body Width	-	-	-	7123 mm	-	-
Inside Body Width	-	-	-	6920 mm	-	-
Front Canopy Height	-	-	-	6739 mm	-	-
Rear Axle - Clearance	-	-	-	1263 mm	-	-
Centerline of Rear Dual Tire Width	-	-	-	4695 mm	-	-
Overall Tire Width	-	-	-	7120 mm	-	-
Dimensions
Height - Top of ROPS	-	-	-	-	12.8 ft	-
Inside Body Depth - Maximum	-	-	-	-	5.7 ft	-
Overall Body Length	-	-	-	-	26.8 ft	-
Inside Body Length	-	-	-	-	19 ft	-
Overall Length	-	-	-	-	28.9 ft	-
Wheel Base	-	-	-	-	13 ft	-
Rear Axle - Tail	-	-	-	-	9.5 ft	-
Ground Clearance	-	-	-	-	1.6 ft	-
Dump Clearance	-	-	-	-	1.5 ft	-
Loading Height - Empty	-	-	-	-	11.6 ft	-
Overall Height - Body Raised	-	-	-	-	27.1 ft	-
Operating Width	-	-	-	-	15.7 ft	-
Centerline Front Tire Width	-	-	-	-	10.4 ft	-
Engine Guard Clearance	-	-	-	-	2 ft	-
Outside Body Width	-	-	-	-	12.9 ft	-
Inside Body Width	-	-	-	-	11.9 ft	-
Front Canopy Height	-	-	-	-	13.7 ft	-
Rear Axle - Clearance	-	-	-	-	1.9 ft	-
Centerline of Rear Dual Tire Width	-	-	-	-	8.7 ft	-
Overall Tire Width	-	-	-	-	12.9 ft	-
Dimensions (All dimensions are approximate. MSD II Body, 33R51 tires, unloaded machine.)
Height - Top of ROPS	-	-	-	-	-	17.09 ft
Overall Body Length	-	-	-	-	-	39.32 ft
Inside Body Length	-	-	-	-	-	27.29 ft
Overall Length	-	-	-	-	-	39.23 ft
Wheel Base	-	-	-	-	-	17 ft
Rear Axle - Tail	-	-	-	-	-	12.56 ft
Ground Clearance	-	-	-	-	-	3.29 ft
Dump Clearance	-	-	-	-	-	3.7 ft
Loading Height - Empty	-	-	-	-	-	17.39 ft
Inside Body Depth - Maximum	-	-	-	-	-	9.15 ft
Overall Height - Body Raised	-	-	-	-	-	39.48 ft
Operating Width	-	-	-	-	-	24.72 ft
Centerline Front Tire Width	-	-	-	-	-	15.91 ft
Engine Guard Clearance	-	-	-	-	-	3.41 ft
Overall Canopy Width	-	-	-	-	-	24.81 ft
Outside Body Width	-	-	-	-	-	22 ft
Inside Body Width	-	-	-	-	-	19.72 ft
Front Canopy Height	-	-	-	-	-	19.8 ft
Rear Axle - Clearance	-	-	-	-	-	3.25 ft
Centerline of Rear Dual Tire Width	-	-	-	-	-	14.06 ft
Overall Tire Width	-	-	-	-	-	20.59 ft

Compare Equipment Go Back

775 Off-Highway Truck

793F Mining Truck

775G Off-Highway Truck Bare Chassis

789 Next Generation

772 (07) Off-Highway Truck

785 Mining Truck (LRC, Tier 4 Final / EU Stage V)

Operating Specifications

Engine

Capacity - Dual Slope - 100% Fill Factor

Capacity - Flat Floor - 100% Fill Factor

Weight Distributions - Approximate

Transmission

Final Drives

Brakes

Service Refill Capacities

Body Hoists

Weights - Approximate

Suspension

Tires

ROPS

Sound

Steering

Sustainability

Capacity - HP Body - 100% Fill Factor

Braking System

Cab

Capacity - MSD II - 100% Fill Factor

Weights

Dimensions (Approximate)

Dimensions

Dimensions (All dimensions are approximate. MSD II Body, 33R51 tires, unloaded machine.)

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us