Compare Equipment Go Back

836 Landfill Compactor

Engine

Gross Power - SAE J1995:2014 562 hp - -
Net Power - SAE J1349:2011 496 hp - -
Net Power - ISO 9249:2007 502 hp - -
Engine Power - ISO 14396:2002 553 hp - -
Engine Model C18 - -
Emissions U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014 or Brazil MAR-1, equivalent to China Nonroad Stage III/U.S. EPA Tier 3/ EU Stage IIIA - -
Rated Speed 1900 rpm - -
Peak Torque ( 1,400 rpm ) 2275 lbf·ft - -
Torque Rise 52% - -
Bore 5.71 in - -
Stroke 7.2 in - -
Displacement 1104.5 in³ - -
High Idle Speed 2120 r/min - -
Low Idle Speed 750 r/min - -
Maximum Altitude - Without Derating 7500 ft - -
Note Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. - -

Operating Specifications

Operating Weight (Tier 4 Final/Stage V) 124063 lb - -
Operating Weight (Tier 3/Stage IIIA equivalent) 123321 lb - -
Maximum Operating Weight (Tier 4 Final/Stage V) 126364 lb - -
Maximum Operating Weight (Tier 3/Stage IIIA equivalent) 125622 lb - -

Transmission

Transmission Type Planetary - Powershift - ECPC - -
Direct Drive - Forward 1 4.3 mile/h - -
Direct Drive - Forward 2 7.8 mile/h - -
Direct Drive - Reverse 1 4.6 mile/h - -
Direct Drive - Reverse 2 8.2 mile/h - -

Hydraulic System - Lift

Lift System - Circuit Flow Sharing Implement; Pilot Operated LS Valve w/EH - -
Lift System - Pump Variable displacement piston - -
Max Flow @ 2000 rpm 79 gal/min - -
Relief Valve Setting - Lift 4206 psi - -
Cylinders, Double Acting: Lift, Bore, Stroke 137.9 mm x 1021 mm (5.5 in x 40.2 in) - -
Pilot System Variable displacement piston - -
Pilot Relief Valve Setting 551 psi - -

Hydraulic System - Steering

Steering System - Circuit Flow Sharing Implement; Pilot, load sensing - -
Steering System - Pump Piston – Variable Displacement - -
Max Flow @ 2000 rpm 79 gal/min - -
Relief Valve Setting - Steering 3495 lb/in² - -
Total Steering Angle 86 - -
Steering Cycle Times - High Idle 3.9 s - -
Steering Cycle Times - Low Idle 6.4 s - -

Service Refill Capacities

Fuel Tank 209 gal (US) - -
Diesel Exhaust Fluid Tank 9 gal (US) - -
Cooling Systems - Tier 4 Final/EU Stage V 40 gal (US) - -
Cooling System - Tier 3/Stage IIIA Equivalent 37.2 gal (US) - -
Engine Crankcase 16 gal (US) - -
Transmission 21.9 gal (US) - -
Differential - Final Drives - Front 49 gal (US) - -
Differential - Final Drives - Rear 50 gal (US) - -
Hydraulic System - Implement/Steering 46.2 gal (US) - -
Hydraulic Tank Only 27.2 gal (US) - -
Note - All nonroad Tier 4 Final/Stage V diesel engines are required to use: - Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) for EPA and 10 ppm (mg/kg) for EU sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm - -

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.4 kg of refrigerant which has a CO2 equivalent of 2.002 metric tonnes. - -

Axles

Front Planetary – Fixed - -
Rear Planetary – Oscillating - -
Oscillation Angle ±6° - -

Braking System

Service Brakes Multi Disc Wet (Enclosed) 2 WHL - -
Parking Brake Spring Applied, Hydraulic Released - -

Sound Performance - Tier 4 Final/EU Stage V

Operator Sound Level (ISO 6396:2008) - Standard 72 dB(A) - -
Machine Sound Level (ISO 6395:2008) - Standard 111 dB(A) - -
Operator Sound Level (ISO 6396:2008) - Suppression 72 dB(A) - -
Machine Sound Level (ISO 6395:2008) - Suppression 109 dB(A) - -
Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed. - -
Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed. - -

Sound Performance - Tier 3 / Stage IIIA

Operator Sound Level (ISO 6396:2008) - Standard 72 dB(A) - -
Machine Sound Level (ISO 6395:2008) - Standard 112 dB(A) - -
Operator Sound Level (ISO 6396:2008) - Suppression 72 dB(A) - -
Machine Sound Level (ISO 6395:2008) - Suppression 110 dB(A) - -
Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed. - -
Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed. - -

Dimensions (Approximate)

Height to Top of Beacon 15.2 ft - -
Height to Top of Air Conditioning Condenser 15.2 ft - -
Height - Cab Roof 14.1 ft - -
Height - Top of Exhaust Pipe 15.1 ft - -
Height - Top of Hood 11.3 ft - -
Ground Clearance to Hitch 2.1 ft - -
Ground Clearance to Transmission Guard 2.1 ft - -
Ground Clearance to Bottom of Bumper 3.2 ft - -
Centerline of Rear Axle to Rear Compactor Guard 11.3 ft - -
Hitch to Centerline of Front Axle 7.5 ft - -
Wheel Base 14.9 ft - -
Width over Front Striker Bars 12.9 ft - -
Width over Rear Striker Bars 12.9 ft - -
Width over Platform 10.5 ft - -
Width over Drums 14 ft - -
Overall Machine Length with Semi U-Blade 35.8 ft - -

Straight Blade

Capacity 25.9 yd³ - -
Overall Width 17 ft - -
Height 7.4 ft - -
Height of Cutting Edge 3.7 ft - -
Digging Depth 1.2 ft - -
Ground Clearance 5.7 ft - -
Turning Radius – Outside Corner of Blade 28.7 ft - -
Turning Radius - Inside of Wheels 11.9 ft - -
Weight 6894 lb - -
Total Operating Weight 123000 lb - -

Semi U-Blade

Capacity 29.3 yd³ - -
Overall Width 17.4 ft - -
Height 7.5 ft - -
Height of Cutting Edge 4.1 ft - -
Digging Depth 1.2 ft - -
Ground Clearance 5.7 ft - -
Turning Radius – Outside Corner of Blade 28.9 ft - -
Turning Radius – Inside of Wheels 11.9 ft - -
Weight 7963 lb - -
Total Operating Weight 124063 lb - -

U-Blade

Capacity 33.6 yd³ - -
Overall Width 17.4 ft - -
Height 7.2 ft - -
Height of Cutting Edge 4.1 ft - -
Digging Depth 3.1 ft - -
Ground Clearance 3.9 ft - -
Turning Radius – Outside Corner of Blade 28.8 ft - -
Turning Radius – Inside of Wheels 11.9 ft - -
Weight 7696 lb - -
Total Operating Weight 123785 lb - -

Wheels

Combination Tips (Weight Group) 28250 lb - -
Plus Tips - Weight (Group) 29784 lb - -
Paddle Tips - Weight (Group) 272227 lb - -
Chopper Tips (Weight Group) 28404 lb - -
Diamond Tips Weight (Group) 32659 lb - -
Outside Diameter 83.8 in - -
Outside Diameter - Diamond 84.3 in - -
Drum Diameter 69.7 in - -
Drum Width 55.1 in - -
Feet Per Row 8 - -
Feet Per Wheel 40 - -
Replaceable Weld on - -
Width Over Drums 4280 mm - -
Tip Height 179 mm - -
Tip Height - Diamond 7.25 in - -
Add a Similar Product:
  • CP56B Vibratory Soil Compactor Add
  • CS56B Vibratory Soil Compactor Add
  • CP12 GC Vibratory Soil Compactor Add
  • CS44B Vibratory Soil Compactor Add
  • CS12 GC Vibratory Soil Compactor Add
  • CP11 GC Vibratory Soil Compactor Add
  • CP44B Vibratory Soil Compactor Add
  • CS10 GC Vibratory Soil Compactor Add
  • CS11 GC Vibratory Soil Compactor Add
  • CB15 Tandem Vibratory Roller Add