Compare Equipment Go Back
262D3 Skid Steer Loader |
|
|
|
Engine |
|||
---|---|---|---|
Gross Power - SAE J1995 | 74.3 HP | - | - |
Net Power - SAE 1349 | 72.9 HP | - | - |
Displacement | 203 in³ | - | - |
Stroke | 4.7 in | - | - |
Bore | 3.7 in | - | - |
Net Flywheel Power | 72.9 HP | - | - |
Peak Torque - 1,500 rpm - SAE J1995 | 195 ft·lbf | - | - |
Net Power - ISO 9249 | 73.7 HP | - | - |
Engine Model | Cat C3.3B DIT (turbo) | - | - |
Operating Specifications |
|||
Rated Operating Capacity | 2700 lb | - | - |
Rated Operating Capacity with Optional Counterweight | 3055 lb | - | - |
Tipping Load | 5400 lb | - | - |
Breakout Force - Tilt Cylinder | 7355 lb | - | - |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou | - | - |
Weights |
|||
Operating Weight | 8296 lb | - | - |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou | - | - |
Dimensions |
|||
Wheel Base | 49.2 in | - | - |
Length - With Bucket on Ground | 146.2 in | - | - |
Length - Without Bucket | 117.9 in | - | - |
Height - Top of Cab | 83.1 in | - | - |
Vehicle Width over Tires | 66 in | - | - |
Maximum Overall Height | 157.8 in | - | - |
Bucket Pin Height - Maximum Lift | 124.9 in | - | - |
Bucket Pin Height - Carry Position | 7.9 in | - | - |
Reach - Maximum Lift/Dump | 30.9 in | - | - |
Clearance at Maximum Lift and Dump | 93.7 in | - | - |
Ground Clearance | 8.9 in | - | - |
Departure Angle | 26° | - | - |
Bumper Overhang - Rear Axle | 42.6 in | - | - |
Maximum Dump Angle | 51° | - | - |
Rack Back Angle - Maximum Height | 84° | - | - |
Bucket Pin Reach - Maximum Lift | 15.5 in | - | - |
Turning Radius from Center - Bucket | 85.9 in | - | - |
Turning Radius from Center - Coupler | 55.2 in | - | - |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou | - | - |
Maximum Reach - With Arms Parallel to Ground | 50.9 in | - | - |
Turning Radius from Center - Machine Rear | 71.1 in | - | - |
Cab |
|||
ROPS | ISO 3471:2008 | - | - |
FOPS | ISO 3449:2005 Level I | - | - |
Service Refill Capacities |
|||
Chain Box - Each Side | 3.3 gal (US) | - | - |
Cooling System | 3.7 gal (US) | - | - |
Engine Crankcase | 3 gal (US) | - | - |
Fuel Tank | 27.7 gal (US) | - | - |
Hydraulic System | 13.7 gal (US) | - | - |
Hydraulic Tank | 10.3 gal (US) | - | - |
Hydraulic System |
|||
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061 psi | - | - |
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 76 HP | - | - |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 44 HP | - | - |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3335 psi | - | - |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 23 gal/min | - | - |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 32 gal/min | - | - |
Power Train |
|||
Travel Speed - Forward or Reverse - Two Speed Option | 11 mile/h | - | - |
Travel Speed - Forward or Reverse - One Speed | 7.7 mile/h | - | - |
Noise Level |
|||
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | - | - |
Inside Cab* | 81 dB(A) | - | - |
Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee | - | - |
Outside Cab** | 101 dB(A) | - | - |
Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | - | - |
Air Conditioning System (if equipped) |
|||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | - | - |
Add a Similar Product:
- 272D3 Skid Steer Loader Add
- 272D3 XE Skid Steer Loader Add
- 242D3 Skid Steer Loader Add
- 246D3 Skid Steer Loader Add
- 226D3 Skid Steer Loader Add
- 232D3 Skid Steer Loader Add
- 236D3 Skid Steer Loader Add
- 299D3 XE Compact Track Loader Add
- 299D3 XE Land Management Compact Track Loader Add
- 289D3 Compact Track Loader Add