Compare Equipment Go Back
995 Wheel Loader |
986 Wheel Loader |
|
|
Engine |
|||
---|---|---|---|
Engine Model | Cat® 3516E | C15 Cat® | - |
Emissions | U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA | - |
Engine Power - ISO 14396 | 1847 hp | 449 hp | - |
Gross Power - SAE J1995 | 1870 hp | - | - |
Net Power - SAE J1349 - Standard Ambient | 1739 hp | - | - |
Net Power - SAE J1349 - High Ambient | 1696 hp | - | - |
Bore | 6.7 in | 5.4 in | - |
Stroke | 8.5 in | 6.75 in | - |
Displacement | 4766 in³ | 927 in² | - |
Peak Torque - 1,200 rpm - SAE J1995 | 8549 lb/ft | 1778 lb/ft | - |
Torque Rise | 39% | 16% | - |
Note (1) | The power ratings apply when tested under the reference conditions for the specified standard. | - | - |
Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. | - | - |
Note (3) | The gross power advertised is with the fan at maximum speed. | - | - |
Peak Power Speed | - | 1600 | - |
Peak Power Speed - Gross - SAE J1995 | - | 456 hp | - |
Net Power - SAE J1349 | - | 373 hp | - |
Rated Speed | - | 2000 | - |
Rated Speed - 2,000 rpm - EEC 80/1269 | - | 373 hp | - |
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) | - | 378 hp | - |
Rated Speed - 2,000 rpm - ISO 9249 | - | 373 hp | - |
Rated Speed - 2,000 rpm - ISO 9249 (DIN) | - | 378 hp | - |
Operating Specifications |
|||
Operating Weight - Standard | 543772 lb | 97785 lb | - |
Bucket Capacity Range | 17.2-43.6 m3 (22.3-57 yd3) | 5-10,3 m³ (6,5-13,5 yd.³) | - |
Operating Weight - High Lift | 547675 lb | 104005 lb | - |
Rated Payload - Standard Lift (Low to Moderate Digging Resistance) | 60 ton (US) | - | - |
Rated Payload - Standard Lift (Moderate to High Digging Resistance) | 50 ton (US) | - | - |
Rated Payload - High Lift (Low to Moderate Digging Resistance) | 55 ton (US) | - | - |
Rated Payload - High Lift (Moderate to High Digging Resistance) | 50 ton (US) | - | - |
Note | *Please contact your local dealer to determine if your application is suitable for this increased rated payload. | - | - |
Cat Truck Match - Standard | 785/789 | 770/735/740/745 | - |
Cat Truck Match - High Lift | 789/793/794 | 772/773 | - |
Rated Payload - Standard (Quarry Face) | - | 11 ton (US) | - |
Rated Payload - Loose Material (Standard) | - | 14 ton (US) | - |
Rated Payload - High Lift (Quarry Face) | - | 11 ton (US) | - |
Rated Payload - Loose Material (High Lift) | - | 12.1 ton (US) | - |
Complete System Fill |
|||
Fuel Tank - Standard | 856 gal (US) | - | - |
Fuel Tank - With 24 hr Attachment | 1414 gal (US) | - | - |
Cooling System | 138 gal (US) | - | - |
Engine Crankcase | 76 gal (US) | - | - |
Transmission | 110 gal (US) | - | - |
Differential - Final Drives - Front | 220 gal (US) | - | - |
Differential - Final Drives - Rear | 200 gal (US) | - | - |
Hydraulic Tank - Implement and Hydraulic Fan | 270 gal (US) | - | - |
Hydraulic Tank - Steering and Braking | 100 gal (US) | - | - |
Oil Renewal System (ORS)* | 20 gal (US) | - | - |
Note | *Not available on Tier 4 Final/Stage V machines. Not available in all regions. | - | - |
Axles |
|||
Front | Fixed | Fixed | - |
Rear | Trunnion | Trunnion | - |
Oscillation Angle | 9° | ±12.5° | - |
Oscillation Angle - Chain Arrangement | - | ±8.5° | - |
Cooling System |
|||
Ambient Capability Hydraulically Driven Demand Fan - Standard | 109.4 °F | - | - |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) | 131 °F | - | - |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) | 127.4 °F | - | - |
Sound Performance - Standard |
|||
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | 74 dB(A) | - | - |
Machine Sound Level (ISO 6395:2008) | 119 dB(A) | - | - |
Note | The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c |
|
- |
Operator Sound Level (ISO 6396) | - | 72 dB(A) | - |
Machine Sound Level (ISO 6395) | - | 112 dB(A) | - |
Sound Performance - Suppression |
|||
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | 73 dB(A) | - | - |
Machine Sound Level (ISO 6395:2008) | 117 dB(A) | - | - |
Note | The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c |
|
- |
Operator Sound Level (ISO 6396) | - | 72 dB(A) | - |
Machine Sound Level (ISO 6395) | - | 110 dB(A) | - |
Hydraulic System - Steering |
|||
Steering System - Circuit | Pilot, Load Sensing | Load Sense | - |
Steering System - Pump | Piston, Variable Displacement | Piston, variable displacement | - |
Total Steering Angle | 80 degrees | 70° | - |
Steering Cycle Times - Low Idle | 7.6 s | - | - |
Steering Cycle Times - High Idle | 4.3 s | - | - |
Maximum Flow at 1,400 rpm | - | 52 gal/min | - |
Steering Cut Off Pressure | - | 4000 psi | - |
Dimensions - Standard Lift - Approximate |
|||
B-Pin Height - Maximum Lift | 28.8 ft | - | - |
Clearance at Maximum Lift | 19.8 ft | - | - |
Dump Angle at Maximum Lift | –50.0 degrees | - | - |
Front Axle Centerline to Bucket Tip | 21.9 ft | - | - |
Ground to Bumper Clearance | 4.4 ft | - | - |
Ground to Center of Axles | 6 ft | - | - |
Ground to Lower Hitch Clearance | 2.9 ft | - | - |
Ground to Top of Exhaust Stacks | 23.2 ft | - | - |
Ground to Top of Hood | 18.6 ft | - | - |
Ground to Top of ROPS | 23.4 ft | - | - |
Maximum Overall Height - Bucket Raised | 39.3 ft | - | - |
Maximum Overall Length | 64.6 ft | - | - |
Note | Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. | - | - |
Rack Angle at Maximum Lift | 59.5 degrees | - | - |
Rack Back Angle - Carry | 47.7 degrees | - | - |
Rack Back Angle - Ground Level | 39.7 degrees | - | - |
Reach - Maximum Lift | 9.6 ft | - | - |
Rear Axle - Centerline to Bumper | 20.4 ft | - | - |
Tread Width | 14.1 ft | - | - |
Wheel Base | 22.3 ft | - | - |
Width - Over Tires - With Bulge | 18.8 ft | - | - |
Dimensions - High Lift - Approximate |
|||
B-Pin Height - Maximum Lift | 31.6 ft | - | - |
Clearance at Maximum Lift | 22.6 ft | - | - |
Dump Angle at Maximum Lift | –50.0 degrees | - | - |
Front Axle Centerline to Bucket Tip | 24.2 ft | - | - |
Ground to Bumper Clearance | 4.4 ft | - | - |
Ground to Center of Axles | 6 ft | - | - |
Ground to Lower Hitch Clearance | 2.9 ft | - | - |
Ground to Top of Exhaust Stacks | 23.2 ft | - | - |
Ground to Top of Hood | 18.6 ft | - | - |
Ground to Top of ROPS | 23.4 ft | - | - |
Maximum Overall Height - Bucket Raised | 42.1 ft | - | - |
Maximum Overall Length | 66.9 ft | - | - |
Note | Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. | - | - |
Rack Angle at Maximum Lift | 59.4 degrees | - | - |
Rack Back Angle - Carry | 53.5 degrees | - | - |
Rack Back Angle - Ground Level | 45 degrees | - | - |
Reach - Maximum Lift | 9.4 ft | - | - |
Rear Axle - Centerline to Bumper | 20.4 ft | - | - |
Tread Width | 14.1 ft | - | - |
Wheel Base | 22.3 ft | - | - |
Width - Over Tires - With Bulge | 18.8 ft | - | - |
Transmission |
|||
Transmission Type | Cat Planetary Power Shift | Cat planetary power shift | - |
Forward - 1 | 4.6 mile/h | 5 mile/h | - |
Forward - 2 | 8 mile/h | 8 mile/h | - |
Forward - 3 | 13.6 mile/h | - | - |
Reverse - 1 | 5 mile/h | 5 mile/h | - |
Reverse - 2 | 8.8 mile/h | 8 mile/h | - |
Reverse - 3 | 14.9 mile/h | - | - |
Direct Drive - Forward 1 | Lock-up disables | - | - |
Direct Drive - Forward 2 | 8.7 mile/h | 8 mile/h | - |
Direct Drive - Forward 3 | 15.2 mile/h | 14 mile/h | - |
Direct Drive - Reverse 1 | Lock-up disables | - | - |
Direct Drive - Reverse 2 | 9.6 mile/h | 9 mile/h | - |
Direct Drive - Reverse 3 | 16.8 mile/h | 16 mile/h | - |
Note | Travel speeds based on 58/85-57 tires. | - | - |
Direct Drive - Forward 4 | - | 24 mile/h | - |
Direct Drive - Reverse 4 | - | 25.4 mile/h | - |
Hydraulic System - Lift/Tilt |
|||
Lift/Tilt System - Circuit | Positive Flow Control | Load Sense | - |
Lift/Tilt System - Pump | Variable Displacement Piston | 2 × 110 cc variable displacement | - |
Maximum Flow at 1,700 rpm Engine Speed | 541 gal/min | - | - |
Relief Valve Setting - Lift/Tilt | 5004 psi | 4050 psi | - |
Cylinders, Double Acting - Lift, Bore and Stroke | 370 × 1713 mm (14.6 × 67.4 in) | - | - |
Cylinders, Double Acting - Tilt, Bore and Stroke | 310 × 1086 mm (12.2 × 42.8 in) | - | - |
Pilot System | Open Loop and Pressure Reducing | - | - |
Maximum Flow at 2,165 rpm | - | 123 gal/min | - |
Lift Cylinder - Bore | - | 7.5 in | - |
Lift Cylinder - Stroke | - | 45 in | - |
Tilt Cylinder - Bore | - | 6.7 in | - |
Tilt Cylinder - Stroke | - | 28.4 in | - |
Hydraulic Cycle Times |
|||
Rack Back | 4.9 s | 4.5 s | - |
Raise | 12.6 s | 9 s | - |
Dump | 3.1 s | 3.5 s | - |
Lower Float Down | 4.2 s | 4.3 s | - |
Lower | - | 5.2 s | - |
Total Hydraulic Cycle Time | - | 21.3 s | - |
Brakes |
|||
Brakes | ISO 3450:2011 | ISO 3450:2011 | - |
Air Conditioning System |
|||
Air Conditioning | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. | - |
Service Refill Capacities |
|||
Fuel Tank | - | 141 gal (US) | - |
Fuel Tank - Short Lift | - | 127 gal (US) | - |
Cooling Systems | - | 26 gal (US) | - |
Crankcase | - | 9 gal (US) | - |
Diesel Exhaust Fluid Tank | - | 6 gal (US) | - |
Transmission | - | 20 gal (US) | - |
Axle Oil - Differentials and Final Drives - Front | - | 49 gal (US) | - |
Axle Oil - Differentials and Final Drives - Rear | - | 45 gal (US) | - |
Hydraulic System Factory Fill | - | 87 gal (US) | - |
Hydraulic System - Tank Only | - | 34 gal (US) | - |
Operator's Cab |
|||
ROPS/FOPS | - | ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) | - |
Dimensions (Approximate) - Standard Lift Linkage |
|||
Ground to Top of ROPS | - | 13.5 ft | - |
Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
Ground to Top of Hood | - | 10.7 ft | - |
Ground to Center of Front Axle | - | 3.2 ft | - |
Ground to Fuel Tank Clearance | - | 2.3 ft | - |
Ground to Lower Hitch Clearance | - | 1.5 ft | - |
Reach - Maximum Lift | - | 7.1 ft | - |
Clearance at Maximum Lift | - | 10.1 ft | - |
B-Pin Height - Maximum Lift | - | 16.1 ft | - |
Maximum Overall Height - Bucket Raised | - | 22.4 ft | - |
Rear Axle - Centerline to Bumper | - | 10.3 ft | - |
Wheel Base | - | 12.5 ft | - |
Maximum Overall Length | - | 36.6 ft | - |
Front Axle Centerline to Bucket Tip | - | 13.8 ft | - |
Note | - |
|
- |
Dimensions (Approximate) - High Lift Linkage |
|||
Ground to Top of ROPS | - | 13.5 ft | - |
Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
Ground to Top of Hood | - | 10.7 ft | - |
Ground to Center of Front Axle | - | 3.2 ft | - |
Ground to Fuel Tank Clearance | - | 2.3 ft | - |
Ground to Lower Hitch Clearance | - | 1.5 ft | - |
Reach - Maximum Lift | - | 7.4 ft | - |
Clearance at Maximum Lift | - | 11.6 ft | - |
B-Pin Height - Maximum Lift | - | 17.6 ft | - |
Maximum Overall Height - Bucket Raised | - | 23.9 ft | - |
Rear Axle - Centerline to Bumper | - | 10.3 ft | - |
Wheel Base | - | 12.5 ft | - |
Maximum Overall Length | - | 38 ft | - |
Front Axle Centerline to Bucket Tip | - | 15.3 ft | - |
Note | - |
|
- |
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket |
|||
Ground to Top of ROPS | - | 13.5 ft | - |
Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
Ground to Top of Hood | - | 10.7 ft | - |
Ground to Center of Rear Axle | - | 3.2 ft | - |
Ground to Fuel Tank Clearance | - | 2.3 ft | - |
Ground to Lower Hitch Clearance | - | 1.5 ft | - |
Reach at Maximum Lift | - | 8 ft | - |
Clearance at Maximum Lift | - | 10.7 ft | - |
B-Pin Height at Maximum Lift | - | 15 ft | - |
Maximum Overall Height, Bucket Raised | - | 20.9 ft | - |
Rear Axle Center Line to Bumper | - | 10.3 ft | - |
Wheel Base | - | 12.5 ft | - |
Maximum Overall Length | - | 35 ft | - |
Front Axle Centerline to Bucket Tip | - | 12.2 ft | - |
Dimensions (Approximate) - Quick Coupler and Fork |
|||
Ground to Top of ROPS | - | 13.5 ft | - |
Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
Ground to Top of Hood | - | 10.7 ft | - |
Ground to Center of Rear Axle | - | 3.2 ft | - |
Ground to Fuel Tank Clearance | - | 2.3 ft | - |
Ground to Lower Hitch Clearance | - | 1.5 ft | - |
B-Pin Height at Maximum Lift | - | 15 ft | - |
Rear Axle Center Line to Bumper | - | 10.3 ft | - |
Wheel Base | - | 12.5 ft | - |
Maximum Overall Length | - | 35.4 ft | - |
Front Axle Centerline to Bucket Tip | - | 12.6 ft | - |
Add a Similar Product:
- 992 Wheel Loader Add
- 988 GC Wheel Loader Add
- 990 Wheel Loader Add
- 988 XE Wheel Loader Add
- 988 Wheel Loader Add
- 950 GC Wheel Loader | Front Loader Add
- 938M Aggregate Handler Small Wheel Loader Add
- 938M Waste Handler Small Wheel Loader Add
- 938M Small Wheel Loader Add
- 930M Waste Handler Small Wheel Loader Add