Compare Equipment Go Back
785 Mining Truck (LRC, Tier 4 Final / EU Stage V) |
|
|
|
Weights - Approximate |
|||
---|---|---|---|
Nominal Rated Payload (33.00R51 Tires) | 153 ton (US) | - | - |
Rated Gross Machine Weight (33.00R51 tires) | 550000 lb | - | - |
Nominal Rated Payload (36.00R51 Tires) | 157 ton (US) | - | - |
Rated Gross Machine Weight (36.00R51 tires) | 564000 lb | - | - |
Chassis Weight (33.00R51 Tires) | 186799 lb | - | - |
Chassis Weight (36.00R51 Tires) | 193192 lb | - | - |
Body Weight | 57779 lb | - | - |
Note (1) | Consult your tire manufacturer for maximum tire load | - | - |
Note (2) | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. | - | - |
Note (3) | Body weight varies depending on body selection and configuration. | - | - |
Engine |
|||
Gross Power - SAE J1995 | 1600 HP | - | - |
Engine Model | Cat 3512E | - | - |
Net Power - SAE J1349 | 1509 HP | - | - |
Emissions Rating | Fuel Optimized | - | - |
Bore | 6.7 in | - | - |
Stroke | 8.5 in | - | - |
Displacement | 3573 in³ | - | - |
Note (1) | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | - | - |
Note (2) | U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | - | - |
Note (3) | Additional fuel optimized selectable power ratings: 1,450 hp | - | - |
Weight Distributions - Approximate |
|||
Front Axle - Empty | 48% | - | - |
Rear Axle - Empty | 52% | - | - |
Front Axle - Loaded | 33% | - | - |
Rear Axle - Loaded | 67% | - | - |
Note | Weight distributions optimized with Cat body. | - | - |
Final Drives |
|||
Type | Double reduction, planetary with full floating axles. | - | - |
Differential Ratio | 2:10:01 | - | - |
Planetary Ratio | 10.83:1 | - | - |
Total Reduction Ratio | 22.75:1 | - | - |
Tires |
|||
Standard Tire | 33.00R51 | - | - |
Optional Tire | 36.00R51 | - | - |
Rims | 610 mm (24") Rims (standard). 660 mm (26") Rims (optional). | - | - |
Note (1) | Quick Change Rims optional. | - | - |
Note (2) | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | - | - |
Braking System |
|||
Service Brakes | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | - | - |
Front Wet Disc Brake Surface Area | 9487 in² | - | - |
Rear - Wet Disc Brake Surface Area | 13908 in² | - | - |
Standards | Service and Secondary: ISO 3450:2011 | - | - |
Parking Brake | Four corner, multi disc, spring applied, hydraulically released | - | - |
Capacity - MSD II - 100% Fill Factor |
|||
Struck | 72 m^3 / 94 yd^3 | - | - |
Heaped (SAE 2:1) | 99 m^3 / 129 yd^3 | - | - |
Note | Consult your local Cat dealer for body recommendations. | - | - |
Body Hoists |
|||
Type | Twin, two-stage hydraulic cylinders with snubbing valve. | - | - |
Pump Flow - High Idle | 223 gal/min | - | - |
Relief Valve Setting - Raise | 2500 psi | - | - |
Body Raise Time - High Idle | 15 s | - | - |
Body Lower Time - Float | 15.6 s | - | - |
Body Power Down- High Idle | 15.5 s | - | - |
Suspension |
|||
Type | Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments | - | - |
Effective Cylinder Stroke - Front | 12.6 in | - | - |
Effective Cylinder Stroke - Rear | 6.5 in | - | - |
Rear axle - Oscillation | +/- 5.4 degrees | - | - |
Cab |
|||
Air Conditioning | HFC - 134A refrigerant: 24,500 Btu/h | - | - |
Heater / Defroster | 33300 Btu/h | - | - |
Note | The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008. | - | - |
ROPS Standards (1) | ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. | - | - |
FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. | - | - |
Steering |
|||
Steer Angle | 25.1 ° | - | - |
Turning Diameter - ISO 7457:1997 (33.00R51 tires) | 96.6 ft | - | - |
Steering Standards | ISO 5010:2019 | - | - |
Service Refill Capacities |
|||
Fuel Tank | 410 gal (US) | - | - |
Diesel Exhaust Fluid Tank | 36 gal (US) | - | - |
Cooling System | 126 gal (US) | - | - |
Crankcase | 54 gal (US) | - | - |
Front Wheels - Each | 7.1 gal (US) | - | - |
Differential - Final Drives | 139 gal (US) | - | - |
Steering Tank | 29 gal (US) | - | - |
Steering System - Includes Tank | 31 gal (US) | - | - |
Brake/Hoist Tank | 135 gal (US) | - | - |
Brake Hoist System - Includes Tank | 143 gal (US) | - | - |
Torque Converter - Transmission System - Including Sump | 46 gal (US) | - | - |
Dimensions (All dimensions are approximate. MSD II Body, 33R51 tires, unloaded machine.) |
|||
Height - Top of ROPS | 17.09 ft | - | - |
Overall Body Length | 39.32 ft | - | - |
Inside Body Length | 27.29 ft | - | - |
Overall Length | 39.23 ft | - | - |
Wheel Base | 17 ft | - | - |
Rear Axle - Tail | 12.56 ft | - | - |
Ground Clearance | 3.29 ft | - | - |
Dump Clearance | 3.7 ft | - | - |
Loading Height - Empty | 17.39 ft | - | - |
Inside Body Depth - Maximum | 9.15 ft | - | - |
Overall Height - Body Raised | 39.48 ft | - | - |
Operating Width | 24.72 ft | - | - |
Centerline Front Tire Width | 15.91 ft | - | - |
Engine Guard Clearance | 3.41 ft | - | - |
Overall Canopy Width | 24.81 ft | - | - |
Outside Body Width | 22 ft | - | - |
Inside Body Width | 19.72 ft | - | - |
Front Canopy Height | 19.8 ft | - | - |
Rear Axle - Clearance | 3.25 ft | - | - |
Centerline of Rear Dual Tire Width | 14.06 ft | - | - |
Overall Tire Width | 20.59 ft | - | - |
Transmission |
|||
Forward - 1 | 7.4 mile/h | - | - |
Forward - 2 | 10 mile/h | - | - |
Forward - 3 | 13.7 mile/h | - | - |
Forward - 4 | 18.5 mile/h | - | - |
Forward - 5 | 25 mile/h | - | - |
Forward - 6 | 35.6 mile/h | - | - |
Reverse | 7.2 mile/h | - | - |
Top Speed - Loaded | 35.6 mile/h | - | - |
Note | Maximum travel speeds with standard 33.00-R51 tires. | - | - |
Add a Similar Product: