Compare Equipment Go Back
M320 Wheeled Excavator |
M318 Wheeled Excavator |
M315 Wheeled Excavator |
M319 Wheeled Excavator |
|
Engine |
||||
---|---|---|---|---|
Engine Power - ISO 14396 | 174 hp | 174 hp | 148 hp | 174 hp |
Engine Power - ISO 14396 (DIN) | 176 hp (metric) | 176 hp (metric) | 150 hp (metric) | 176 hp (metric) |
Engine Model | C4.4 | C4.4 | C4.4 | C4.4 |
Net Power - ISO 9249 | 171 hp | 171 hp | 145 hp | 171 hp |
Net Power - ISO 9249 (DIN) | 174 hp (metric) | 174 hp (metric) | 147 hp (metric) | 174 hp (metric) |
Bore | 4 in | 4 in | 4.1 in | 4.1 in |
Displacement | 268.5 in³ | 285.5 in³ | 268.5 in³ | 268.5 in³ |
Stroke | 5.3 in | 5 in | 127 mm | 127 mm |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Machine Weight |
||||
Operating Weight Maximum | 46740 lb | 43980 lb | 39680 lb | 46407 lb |
Operating Weight Minimum | 41450 lb | 38580 lb | 34610 lb | 41888 lb |
Note (1) | - | Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. | - | - |
Note (2) | - | Typical configurations include 2500 mm (8'2") medium stick and 3700 kg (8,157 lb) counterweight. | - | - |
Transmission |
||||
Maximum Travel Speed | 21.7 mile/h | - | 21.7 mile/h | 21.7 mile/h |
Forward/Reverse - 1st Gear | - | - | 6.2 mile/h | 6.2 mile/h |
Forward/Reverse - 2nd Gear | - | - | 21.7 mile/h | 21.7 mile/h |
Creeper Speed - 1st Gear | - | - | 3.4 mile/h | 3.4 mile/h |
Creeper Speed - 2nd Gear | - | - | 9.3 mile/h | 9.3 mile/h |
Drawbar Pull | - | - | 23380 lbf | 23380 lbf |
Hydraulic System |
||||
Main System - Maximum Flow - Implement | 81 gal/min | 67 gal/min | 73 gal/min | 67 gal/min |
Maximum Pressure - Equipment | 5366 psi | 5366 psi | - | - |
Maximum Pressure - Swing | 5729 gal/min | 5149 gal/min | - | - |
Maximum Pressure - Travel | 5076 gal/min | 5076 gal/min | - | - |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | 5366 psi | 5366 psi |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | 5076 psi | 5076 psi |
Maximum Pressure - Implement Circuit - Normal | - | - | 5076 psi | 5076 psi |
Service Refill Capacities |
||||
Cooling System | 8.4 gal (US) | 8.5 gal (US) | 24 l | 35 l |
Diesel Exhaust Fluid (DEF) | 7.9 gal (US) | 5.3 gal (US) | 5.3 gal (US) | 5.3 gal (US) |
Hydraulic System - Including Tank | 71.3 gal (US) | 68.7 gal (US) | 58.1 gal (US) | 74 gal (US) |
Hydraulic Tank | 40.9 gal (US) | 31.7 gal (US) | 23.8 gal (US) | 31.7 gal (US) |
Final Drive | 0.7 gal (US) | 0.7 gal (US) | - | - |
Fuel Tank | 124.2 gal (US) | 92.5 gal (US) | 74 gal (US) | 76.6 gal (US) |
Dimensions |
||||
Boom | 5260 mm (17'3") | 5205 mm (17'1") | VA 5.2 m (17'1") | VA 5.2 m (17'1") |
Bucket | 0.98 m³ GD (1.28 yd³) | 0.91 m³ GD (1.19 yd³) | GD 0.76 m³ (0.99 yd³ ) | GD 0.91 m³ (1.19 yd³ ) |
Stick | 2.5 m (8' 2") | 2.5 m (8' 2") | 2.5m (8'2") | 2.5m (8'2") |
Shipping Height - Top of Cab | 11 ft | 11 ft | 10.9 ft | 10.7 ft |
Shipping Length | 29.3 ft | 27.8 ft | 25.1 ft | 26.6 ft |
Counterweight Clearance | 4.3 ft | 4.3 ft | 4.2 ft | 4.25 ft |
Ground Clearance | 1.4 ft | 1.1 ft | 1.5 ft | 1.4 ft |
Support Point | 11.8 ft | 11.5 ft | 10.1 ft | 11.6 ft |
Tail Swing Radius | 8.5 ft | 7.7 ft | 5.9 ft | 6.25 ft |
Wheel Base | 8.9 ft | 8.9 ft | 8.4 ft | 8.8 ft |
Undercarriage Length | - | - | 16 ft | 16.6 ft |
Working Ranges and Forces |
||||
Boom Type | VA Boom | VA Boom | VA 5.2 m (17'1") | VA 5.2 m (17'1") |
Bucket | 0.98 m³ GD (1.28 yd³) | 0.91 m³ GD (1.19 yd³) | GD 0.76 m³ (0.99 yd³ ) | GD 0.91 m³ (1.19 yd³ ) |
Stick | 2.5 m (8' 2") | 2.5 m (8' 2") | 2.5m (8'2") | 2.5m (8'2") |
Reach at Ground Level | 30.5 ft | 30.2 ft | 29.6 ft | 30.2 ft |
Vertical Wall Digging Depth | 13.9 ft | 15.1 ft | 15 ft | 14.6 ft |
Cutting Height | 32.6 ft | 33.7 ft | - | - |
Bucket Forces (ISO) | 30799 lbf | 26752 lbf | 23830 lbf | 26752 lbf |
Stick Forces (ISO) | 20682 lbf | 16861 lbf | 15961 lbf | 16861 lbf |
Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o | - | - |
Digging Height | - | 19.3 ft | 18.4 ft | 18.9 ft |
Dump Height | - | - | 25.2 ft | 25.6 ft |
Swing Mechanism |
||||
Swing Speed | 9.2 r/min | 9.4 r/min | 9.1 r/min | 9.4 r/min |
Maximum Swing Torque | 37000 ft·lbf | - | 30340 ft·lbf | 32560 ft·lbf |
Maximum Swing Speed | - | 32560 ft·lbf | - | - |
Air Conditioning System |
||||
Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. |
Drive |
||||
Maximum Travel Speed | - | 21.7 mile/h | - | - |
Service Refill |
||||
Engine Oil | - | 2.9 gal (US) | - | - |
Sustainability |
||||
Recyclability | - | 92% | - | - |
working Ranges and Forces |
||||
Cutting Height | - | - | 34.2 ft | 35.2 ft |
Add a Similar Product:
- M322 Add
- M316 Wheeled Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- M314 Wheeled Excavator Add
- Cat® 352 UHD Ultra High Demolition Hydraulic Excavator Add
- Cat® 395 Hydaulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- Cat® 352 Hydraulic Excavator Add
- Cat® 374 Hydraulic Excavator Add
- Cat® 340 Hydraulic Excavator Add