Compare Equipment Go Back
Cat® 395 Hydaulic Excavator |
M320 Wheeled Excavator |
340 UHD Ultra High Demolition Hydraulic Excavator |
M322 |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 542 hp | 171 hp | 346 hp | 171 hp |
Net Power - ISO 9249 (DIN) | 550 hp (metric) | 174 hp (metric) | 352 hp (metric) | 174 hp (metric) |
Engine Model | Cat C18 | C4.4 | Cat C9.3B | C 7.1 |
Engine Power - ISO 14396 | 543 hp | 174 hp | 347 hp | 174 hp |
Engine Power - ISO 14396 (DIN) | 551 hp (metric) | 176 hp (metric) | 351 hp (metric) | 176 hp (metric) |
Bore | 6 in | 4 in | 5 in | 4.1 in |
Stroke | 7 in | 5.3 in | 6 in | 5.3 in |
Displacement | 1105 in³ | 268.5 in³ | 568 in³ | 427.8 in² |
Biodiesel Capability | B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,900 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 207400 lb | - | 122600 lb | - |
Note (1) | Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. | - | Hydraulic Variable Gauge undercarriage, 22 m (72'2") UHD front, 600 mm (24") Heavy Duty (HD) triple grouser shoes and 9.0 mt (19,842 lb) counterweight. No work tool. | - |
Machine Weight - Retrofit Configuration | - | - | 118600 lb | - |
Note (2) | - | - | Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.2DB (10'6") stick, General Duty (GD) 2.27 m³ (2.97 yd³) bucket, 600 mm (24") HD triple grouser shoes and 9.0 mt (19,842 lb) counterweight. | - |
UHD in Cradle | - | - | 18700 lb | - |
Retrofit Boom in Cradle - R3.9 DB Stick | - | - | 13710 lb | - |
Retrofit Boom in Cradle - R3.2 DB Stick | - | - | 13340 lb | - |
Retrofit Boom in Cradle - R2.8 DB Stick | - | - | 13120 lb | - |
2-Piece Retrofit Boom in Cradle - R3.2 DB Stick | - | - | 17440 lb | - |
Working Ranges & Forces |
||||
Maximum Digging Depth | 31.9 ft | - | - | - |
Boom | GP 8.4m (25'7") | - | - | - |
Stick | R4.4m (14'5") | - | - | - |
Bucket | SD 5.2m³ (6.8 yd³) | - | - | - |
Maximum Reach at Ground Level | 48.3 ft | - | - | - |
Maximum Cutting Height | 44.5 ft | - | - | - |
Maximum Loading Height | 30.4 ft | - | - | - |
Minimum Loading Height | 9.11 ft | - | - | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 31.4 ft | - | - | - |
Maximum Vertical Wall Digging Depth | 22.3 ft | - | - | - |
Bucket Digging Force - ISO | 86100 ft·lbf | - | - | - |
Stick Digging Force - ISO | 68540 ft·lbf | - | - | - |
Hydraulic System |
||||
Main System - Maximum Flow - Implement | 281 gal/min | 81 gal/min | - | 95 gal/min |
Maximum Pressure - Equipment | 5366 psi | 5366 psi | 5076 psi | - |
Maximum Pressure - Travel | 5076 psi | 5076 gal/min | 5076 psi | - |
Maximum Pressure - Swing | 4496 psi | 5729 gal/min | 4264 psi | - |
Main System - Maximum Flow | - | - | 560 l/min (148 gal/min) | - |
Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi | - |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | - | 5366 psi |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | - | 5076 psi |
Maximum Pressure - Implement Circuit - Normal | - | - | - | 5076 psi |
Swing Mechanism |
||||
Swing Speed | 6.26 r/min | 9.2 r/min | 8 r/min | - |
Maximum Swing Torque | 267333 ft·lbf | 37000 ft·lbf | 105000 ft·lbf | - |
Swing Torque | - | - | - | 44250 lb/ft |
Service Refill Capacities |
||||
Fuel Tank Capacity | 322 gal (US) | - | 159 gal (US) | - |
Cooling System | 19 gal (US) | 8.4 gal (US) | 11 gal (US) | 10.6 gal (US) |
Engine Oil | 18 gal (US) | - | 9 gal (US) | 3.4 gal (US) |
Swing Drive | 6 gal (US) | - | 5 gal (US) | - |
Final Drive - Each | 5 gal (US) | - | 2 gal (US) | - |
Hydraulic System - Including Tank | 196 gal (US) | 71.3 gal (US) | 145 gal (US) | 71.3 gal (US) |
Hydraulic Tank | 98 gal (US) | 40.9 gal (US) | 43 gal (US) | 52.8 gal (US) |
DEF Tank | 21 gal (US) | - | 21 gal (US) | - |
Diesel Exhaust Fluid (DEF) | - | 7.9 gal (US) | - | 7.9 gal (US) |
Final Drive | - | 0.7 gal (US) | - | - |
Fuel Tank | - | 124.2 gal (US) | - | 124.2 gal (US) |
Dimensions |
||||
Boom | GP 8.4m (25'7") | 5260 mm (17'3") | - | VA 5.4m (17'10") |
Stick | R4.4m (14'5") | 2.5 m (8' 2") | - | 2.9m (9'2") |
Bucket | SD 5.2m³ (6.8 yd³) | 0.98 m³ GD (1.28 yd³) | - | - |
Shipping Height - Top of Cab | 12 ft | 11 ft | 11.1 ft | - |
Handrail Height | 12.4 ft | - | - | - |
Shipping Length | 49.6 ft | 29.3 ft | 49.9 ft | 31.1 ft |
Tail Swing Radius | 15.11 ft | 8.5 ft | 11.6 ft | 9.2 ft |
Counterweight Clearance | 5.5 ft | 4.3 ft | 4.6 ft | 4.3 ft |
Ground Clearance | 2.9 ft | 1.4 ft | 1.7 ft | 1.25 ft |
Track Length | 20.1 ft | - | 18.9 ft | - |
Track Length to Center of Rollers | 16.1 ft | - | 15.6 ft | - |
Track Gauge | 11.6 ft | - | - | - |
Transport Width | 12.9 ft | - | 10.7 ft | - |
Note | Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps | - | - | - |
Support Point | - | 11.8 ft | - | 11.3 ft |
Wheel Base | - | 8.9 ft | - | 9 ft |
Note (1) | - | - | 22 m (72'2") UHD Front | - |
Cab Height - With OPG | - | - | 11.8 ft | - |
Working Gauge - Extended Position | - | - | 11.1 ft | - |
Shipping Gauge - Retracted Position | - | - | 7.8 ft | - |
Machine Length - without Front, with Counterweight | - | - | 23.3 ft | - |
Machine Length - without Front and Counterweight | - | - | 22.9 ft | - |
Track Width - Extended | - | - | 13.1 ft | - |
Track Width - Retracted | - | - | 9.8 ft | - |
Note (2) | - | - | 600 mm (24") Track Shoes | - |
Shipping Height with Falling Object Guard | - | - | - | 11 ft |
Sustainability |
||||
Recyclability | 98% | - | - | - |
Air Conditioning System |
||||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. |
Machine Weight |
||||
Operating Weight Maximum | - | 46740 lb | - | 52911 lb |
Operating Weight Minimum | - | 41450 lb | - | 44750 lb |
Transmission |
||||
Maximum Travel Speed | - | 21.7 mile/h | - | - |
Forward/Reverse - 2nd Gear | - | - | - | 18.6 mile/h |
Forward/Reverse - 1st Gear | - | - | - | 5.6 mile/h |
Creeper Speed - 1st Gear | - | - | - | 3.4 mile/h |
Creeper Speed - 2nd Gear | - | - | - | 9.3 mile/h |
Drawbar Pull | - | - | - | 28551 lbf |
Maximum Gradeability | - | - | - | 70% |
Working Ranges and Forces |
||||
Boom Type | - | VA Boom | - | VA 5.4m (17'10") |
Bucket | - | 0.98 m³ GD (1.28 yd³) | - | GD 1.2 m³ (1.7 yd³) |
Stick | - | 2.5 m (8' 2") | - | 2.9m (9'2") |
Reach at Ground Level | - | 30.5 ft | - | 33.4 ft |
Vertical Wall Digging Depth | - | 13.9 ft | - | 17.3 ft |
Cutting Height | - | 32.6 ft | - | - |
Bucket Forces (ISO) | - | 30799 lbf | - | 33946 lbf |
Stick Forces (ISO) | - | 20682 lbf | - | 23605 lbf |
Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | 22 m (72' 2") UHD Front (Over-the-Front) | - |
Maximum Pin Height at Stick Nose | - | - | 72.2 ft | - |
Maximum Weight at Stick Nose | - | - | 8160 lb | - |
Maximum Working Pin Height at Stick Nose - 1/2 | - | - | 61 ft | - |
Maximum Working Reach at Stick Nose - 1/2 | - | - | 38.4 ft | - |
Maximum Height at Stick Nose in Max Reach Position | - | - | 41.5 ft | - |
Maximum Reach at Stick Nose | - | - | 44.4 ft | - |
Maximum Loading Height | - | - | - | 24.7 ft |
Maximum Digging Depth | - | - | - | 21.8 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | - | 21.6 ft |
Swing Mechanism - UHD Fronts |
||||
Swing Speed | - | - | 4.09 r/min | - |
Working Ranges and Forces - Retrofit Boom - Straight |
||||
Note 1 | - | - | Straight - R3.2 m (10' 6") Stick (Over-the-Front) - HVG Undercarriage | - |
Bucket | - | - | GD 2.27 m³ (2.97 yd³) | - |
Maximum Pin Height at Stick Nose | - | - | 39.8 ft | - |
Maximum Weight at Stick Nose | - | - | 9260 lb | - |
Maximum Height at Stick Nose in Max Reach Position | - | - | 7.6 ft | - |
Maximum Reach at Stick Nose | - | - | 34.8 ft | - |
Maximum Digging Depth | - | - | 16.1 ft | - |
Maximum Reach - Ground Level | - | - | 39.9 ft | - |
Maximum Loading Height | - | - | 34 ft | - |
Minimum Loading Height | - | - | 15.7 ft | - |
Bucket Digging Force - ISO | - | - | 47160 lbf | - |
Stick Digging Force - ISO | - | - | 37300 lbf | - |
Working Ranges and Forces - Retrofit Boom - Bent |
||||
Note 1 | - | - | Bent - R3.2DB (10'6") Stick - HVG Undercarriage | - |
Bucket | - | - | GD 2.27 m³ (2.97 yd³) | - |
Maximum Digging Depth | - | - | 21.4 ft | - |
Maximum Reach - Ground Level | - | - | 36.7 ft | - |
Maximum Cutting Height | - | - | 35.4 ft | - |
Maximum Loading Height | - | - | 24.9 ft | - |
Minimum Loading Height | - | - | 10.4 ft | - |
Bucket Digging Force - ISO | - | - | 47160 lbf | - |
Stick Digging Force - ISO | - | - | 37300 lbf | - |
working Ranges and Forces |
||||
Cutting Height | - | - | - | 35.8 ft |
Add a Similar Product:
- M318 Wheeled Excavator Add
- M319 Wheeled Excavator Add
- M314 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- Cat® 352 UHD Ultra High Demolition Hydraulic Excavator Add
- Cat® 374 Hydraulic Excavator Add
- Cat® 352 Hydraulic Excavator Add
- Cat® 340 Hydraulic Excavator Add