|
740 GC Bare Chassis Articulated Truck
|
|
|
|
Wheel Base Length |
Standard Wheel Base |
162.4 in |
- |
- |
- |
Weights |
Rated Payload |
49.2 ton (US) |
26.5 ton (US) |
31 ton (US) |
45.2 t |
Engine |
Engine Model |
Cat® C15 |
Cat C9.3 |
Cat® C13 |
Cat C18 |
Bore |
5.4 in |
4.5 in |
5.1 in |
5.7 in |
Stroke |
6.75 in |
45.2 in |
6.2 in |
7.2 in |
Displacement |
926 in³ |
567.5 in³ |
762.8 in³ |
1106 in³ |
Gross Power - SAE J1995 |
452 hp |
342 hp |
375 hp |
511 hp |
Net Power - SAE J1349 |
439 hp |
334 hp |
367 hp |
496 hp |
Peak Engine Torque Gross (SAE J1995) |
1711 lb/ft |
1275 ft·lbf |
1579 ft·lbf |
1931 ft·lbf |
Net Power - ISO 14396 |
447 hp |
338 hp |
370 hp |
504 hp |
Peak Engine Torque Net (SAE J1349) |
1670 lb/ft |
1263 ft·lbf |
1564 ft·lbf |
1887 ft·lbf |
Peak Engine Torque Speed |
1200 r/min |
1200 r/min |
1200 r/min |
1200 r/min |
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final |
Cat® C15 |
- |
- |
- |
No Engine De-rating Required Below |
10000 ft |
- |
- |
10000 ft |
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV |
- |
Cat® C9.3 |
- |
- |
No Engine De-rating Below |
- |
3000 ft |
12500 ft |
- |
Note (1) |
- |
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards. |
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
Emissions |
- |
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. |
The 730 meets Tier 4 Final and Stage V emission standards. |
The 745 meets Tier 4 Final and Stage V emission standards. |
Note (3) |
- |
Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions. |
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. |
Note (2) |
- |
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. |
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
Note (4) |
- |
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio |
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. |
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio |
Engine Model - U.S. EPA Tier 4 Final/EU Stage V |
- |
- |
Cat C13 |
- |
Note (5) |
- |
- |
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio |
- |
Transmission |
Forward - 1 |
4 mile/h |
5 mT/hr |
5 mile/h |
3.8 mile/h |
Forward - 2 |
5.3 mile/h |
9.4 mT/hr |
9 mile/h |
5 mile/h |
Forward - 3 |
7.3 mile/h |
14.4 mT/hr |
14 mile/h |
7 mile/h |
Forward - 4 |
9.2 mile/h |
22.1 mT/hr |
21 mile/h |
8.8 mile/h |
Forward - 5 |
12.2 mile/h |
30.7 mT/hr |
29 mile/h |
11.6 mile/h |
Forward - 6 |
14.9 mile/h |
36.3 mT/hr |
34 mile/h |
14.2 mile/h |
Forward - 7 |
20.6 mile/h |
- |
- |
19.6 mile/h |
Forward - 8 |
24.7 mile/h |
- |
- |
23.5 mile/h |
Forward - 9 |
35.7 mile/h |
- |
- |
34 mile/h |
Reverse - 1 |
4.2 mile/h |
5.5 mT/hr |
6 mile/h |
4 mile/h |
Reverse - 2 |
9.8 mile/h |
- |
- |
9.1 mile/h |
Service Refill Capacities |
Fuel Tank |
143.5 gal (US) |
91 gal (US) |
108.8 gal (US) |
145.3 gal (US) |
Cooling System |
23.7 gal (US) |
18 gal (US) |
21.9 gal (US) |
23.7 gal (US) |
Brake Cooling Tank |
17.7 gal (US) |
- |
- |
17.69 gal (US) |
Steering/Hoist Hydraulic System |
36.9 gal (US) |
24 gal (US) |
- |
36.9 gal (US) |
Engine Crankcase |
13.7 gal (US) |
8 gal (US) |
10 gal (US) |
13.7 gal (US) |
Transmission - OTG |
19.8 gal (US) |
- |
- |
19.8 gal (US) |
Final Drive - Each |
1.3 gal (US) |
1.6 gal (US) |
- |
1.3 gal (US) |
Axles - Each |
15.8 gal (US) |
- |
- |
15.8 gal (US) |
DEF Tank |
25 gal (US) |
4 gal (US) |
5.3 gal (US) |
5.3 gal (US) |
Hydraulic System |
- |
29.1 gal (US) |
29.1 gal (US) |
- |
Transmission |
- |
10 gal (US) |
12.4 gal (US) |
- |
Final Drives/Differential |
- |
33 gal (US) |
33 gal (US) |
- |
Output Transfer Gear Box |
- |
5 gal (US) |
6.3 gal (US) |
- |
Sound Levels |
Interior Cab |
72 dB(A) |
69 dB(A) |
72 dB(A) |
72 dB(A) |
Note (1) |
- |
The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling f |
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the |
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the |
Note (2) |
- |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Standards |
Brakes |
ISO 3450:2011 |
ISO 3450 – 2011 |
ISO 3450 – 2011 |
ISO 3450 – 2011 |
Cab - FOPS |
ISO 3449:2005 Level II |
ISO 3449 Level II – 2008 |
ISO 3449 Level II – 2005 |
ISO 3449 Level II – 2005 |
Cab - ROPS |
ISO 3471:2008 |
ISO 3471 – 2008 |
ISO 3471 – 2008 |
ISO 3471 – 2008 |
Steering |
ISO 5010:2019 |
ISO 5010 – 2007 |
ISO 5010 – 2007 |
ISO 5010 – 2019 |
Steering |
Lock to Lock |
4.75 seconds at 60 rpm |
4.75 seconds @ 60 rpm |
4.75 seconds @ 60 rpm |
4.8 seconds @ 60 rpm |
Turning Circle |
Turning Dimensions - Aisle Width |
220 in |
210 in |
210 in |
233 in |
Turning Dimensions - SAE Turning Radius |
303 in |
294 in |
294 in |
340 in |
Turning Dimensions - Clearance Radius |
330 in |
318 in |
318 in |
356 in |
Turning Dimensions - Inside Radius |
156 in |
153 in |
153 in |
174 in |
Turning Dimensions - Steer Angle - Left/Right |
45° |
45° |
45° |
45 deg |
Note |
Dimensions are for machines equipped with 29.5 R25 tires. |
Dimensions are for machines equipped with 23.5R25 tires. |
Dimensions are for machines equipped with 23.5R25 tires. |
Dimensions are for machines equipped with 29.5R25 tires. |
Body Capacities |
Heaped (SAE 2:1) |
- |
19.6 yd³ |
23 yd³ |
33.4 yd³ |
Struck |
- |
14.4 yd³ |
17.4 yd³ |
26 yd³ |
Tailgate Heaped SAE 2:1 |
- |
20.4 yd³ |
24.6 yd³ |
35.7 yd³ |
Tailgate Struck |
- |
14.5 yd³ |
18.2 yd³ |
25.5 yd³ |
Body Hoist |
Raise Time |
- |
10 s |
12 s |
- |
Lower Time |
- |
8 s |
8 s |
- |
Raise (manual) |
- |
- |
- |
12 s |
Raise (automatic) |
- |
- |
- |
13 s |
Lower (manual) |
- |
- |
- |
10 s |
Lower (automatic) |
- |
- |
- |
10 s |
Operating Weights |
Total - Loaded |
- |
103886 lb |
114420 lb |
163385 lb |
Rear Axle - Rated Load |
- |
23699 lb |
27249 lb |
38713 lb |
Total - Empty |
- |
50975 lb |
52690 lb |
72995 lb |
Total - Rated Load |
- |
52910 lb |
61729 lb |
90389 lb |
Center Axle - Loaded |
- |
33944 lb |
37302 lb |
54366 lb |
Front Axle - Rated Load |
- |
5511 lb |
7231 lb |
12963 lb |
Center Axle - Rated Load |
- |
23699 lb |
27249 lb |
38713 lb |
Center Axle - Empty |
- |
10242 lb |
10053 lb |
15653 lb |
Rear Axle - Loaded |
- |
33457 lb |
36817 lb |
53771 lb |
Front Axle - Loaded |
- |
36484 lb |
40300 lb |
55248 lb |
Rear Axle - Empty |
- |
9757 lb |
9568 lb |
15653 lb |
Front Axle - Empty |
- |
30974 lb |
33069 lb |
42285 lb |
Body Plate Thickness |
Side Plates |
- |
0.43 in |
0.43 in |
- |
Front Plate |
- |
0.28 in |
0.28 in |
- |
Base Plate |
- |
0.51 in |
0.51 in |
- |
Body Plate |
Type |
- |
High strength Brinell HB450 wear resistant steel |
High strength Brinell HB450 wear resistant steel |
High Strength Brinell HB450 Wear Resistant Steel |
Front |
- |
- |
- |
0.28 in |
Chute |
- |
- |
- |
0.55 in |
Side |
- |
- |
- |
0.43 in |
Base |
- |
- |
- |
0.55 in |
Optimal Loader/Truck Pass Matching |
Wheel Loader: 950M - Passes |
- |
5 |
5 |
- |
Wheel Loader: 962M - Passes |
- |
4-5 |
4–5 |
- |
Wheel Loaders: 966M/966M XE - Passes |
- |
4 |
4 |
- |
Hydraulic Excavators: 336F/336F XE - Passes |
- |
5-6 |
5–6 |
- |
Wheel Loaders: 972M/972M XE - Passes |
- |
3-4 |
3–4 |
- |
Hydraulic Excavators: 349F/349F XE - Passes |
- |
4-5 |
4–5 |
- |
Note |
- |
- |
An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased |
An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. |
Hydraulic Excavator: 390 - Passes |
- |
- |
- |
4 |
Hydraulic Excavator: 374 - Passes |
- |
- |
- |
5 |
Wheel Loader: 982 - Passes |
- |
- |
- |
4 |
Wheel Loader: 980 - Passes |
- |
- |
- |
4-5 |
Wheel Loader: 972 - Passes |
- |
- |
- |
4-5 |