Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
-
-
Standard Capability
122 °F
-
-
Note (2)
Optimized VHP Plus is standard for the 14M3.
-
-
Torque Rise
41%
-
-
Maximum Altitude - Full Power
13900 ft
-
-
Maximum Torque - VHP Plus
1137 lb/ft
-
-
Emissions
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
-
-
Maximum Altitude - Full Power (Tier 3)
14349 ft
-
-
Maximum Altitude - Full Power (Tier 2)
12049 ft
-
-
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
-
-
Standard - Fan Speed - Minimum
550 rpm
-
-
Note (4)
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
-
-
Note (5)
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
-
-
Standard - Fan Speed - Maximum
1,600 rpm
-
-
Displacement
763 in³
-
-
Number of Cylinders
6
-
-
Weights
Operating Weight - Typically Equipped
57250 lb
-
-
Gross Vehicle Weight - Base* - Total
50980 lb
-
-
Gross Vehicle Weight - Base* - Front Axle
13994 lb
-
-
Gross Vehicle Weight - Typically Equipped - Total
57250 lb
-
-
Gross Vehicle Weight - Typically Equipped - Rear Axle
42005 lb
-
-
Gross Vehicle Weight - Typically Equipped - Front Axle
15245 lb
-
-
Gross Vehicle Weight - Base* - Rear Axle
36994 lb
-
-
Note
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
-
-
Moldboard
Blade Width
14 ft
-
-
Arc Radius
16.3 in
-
-
Throat Clearance
4.6 in
-
-
Blade Width - With End Bits
169 in
-
-
Blade Height - With Cutting Edge
24.9 in
-
-
Blade Width - Without End Bits
164 in
-
-
Blade Height - Without Cutting Edge
23 in
-
-
Blade Range
Maximum Depth of Cut
23.3 in
-
-
Circle Centershift - Left
25.6 in
-
-
Maximum Lift Above Ground
16.5 in
-
-
Circle Centershift - Right
20.5 in
-
-
Blade Tip Range - Backward
5°
-
-
Maximum Shoulder Reach Outside of Tires - Right
78.9 in
-
-
Moldboard Sideshift - Right
31.1 in
-
-
Moldboard Sideshift - Left
29.1 in
-
-
Maximum Shoulder Reach Outside of Tires - Left
73.6 in
-
-
Blade Tip Range - Forward
40°
-
-
Frame
Circle - Outer Diameter
71.7 in
-
-
Front Axle - Wheel Lean - Left/Right
17.1°
-
-
Front Axle - Total Oscillation per Side
32°
-
-
Service Refill Capacities
Transmission and Differential
23.5 gal (US)
-
-
Diesel Exhaust Fluid Tank (Tier 4 Only)
5.8 gal (US)
-
-
Hydraulic System
33 gal (US)
-
-
Circle Drive
1.8 gal (US)
-
-
Cooling System
15.9 gal (US)
-
-
Fuel Tank
109.9 gal (US)
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).