Compare Equipment Go Back
330 Excavator | 30 Ton Excavator / Digger |
M320 Wheeled Excavator |
M322 |
352 LRE Long Reach Excavation Hydraulic Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 273 hp | 171 hp | 171 hp | 424 hp |
Net Power - ISO 9249 (DIN) | 277 hp (metric) | 174 hp (metric) | 174 hp (metric) | 429.9 hp (metric) |
Engine Model | Cat C7.1 | C4.4 | C 7.1 | Cat C13 |
Engine Power - ISO 14396 | 275 hp | 174 hp | 174 hp | 425 hp |
Engine Power - ISO 14396 (DIN) | 279 hp (metric) | 176 hp (metric) | 176 hp (metric) | 431 hp (metric) |
Bore | 4 in | 4 in | 4.1 in | 5 in |
Stroke | 5 in | 5.3 in | 5.3 in | 6 in |
Displacement | 428 in³ | 268.5 in³ | 427.8 in² | 763 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 69200 lb | - | - | 128800 lb |
Note | Long undercarriage, Reach boom, R3.2 m (10'6") stick, Heavy Duty (HD) 1.76 m³ (2.30 yd³) bucket, 800 mm (31") triple grouser shoes and 6700 kg (14,770 lb) counterweight. | - | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. |
Working Ranges & Forces |
||||
Maximum Digging Depth | 23.9 ft | - | - | 42.8 ft |
Boom | Reach 6.15 m (20'2") | - | - | LRE Boom 11.5 m (37'9") |
Stick | Reach 3.2 m (10'6") | - | - | LRE Stick 8.5 m (27'11') |
Bucket | HD 1.76 m³ (2.30 yd³) | - | - | HD 1.19 m³ (1.56 yd³) |
Maximum Reach at Ground Level | 35 ft | - | - | 64.4 ft |
Maximum Cutting Height | 32.9 ft | - | - | 48.2 ft |
Maximum Loading Height | 22.8 ft | - | - | 39.4 ft |
Minimum Loading Height | 7.5 ft | - | - | 7.3 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 23.3 ft | - | - | 42.5 ft |
Maximum Vertical Wall Digging Depth | 19.7 ft | - | - | - |
Bucket Digging Force - ISO | 40200 lbf | - | - | 31700 lbf |
Stick Digging Force - ISO | 28300 lbf | - | - | 23380 lbf |
Hydraulic System |
||||
Main System - Maximum Flow | 560 l/min (148 gal/min) | - | - | - |
Maximum Pressure - Equipment | 5075 psi | 5366 psi | - | 5076 psi |
Maximum Pressure - Equipment - Lift Mode | 5510 psi | - | - | 5511 psi |
Maximum Pressure - Travel | 5075 psi | 5076 gal/min | - | 5076 psi |
Maximum Pressure - Swing | 4320 psi | 5729 gal/min | - | 3771 psi |
Main System - Maximum Flow - Implement | - | 81 gal/min | 95 gal/min | - |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | 5366 psi | - |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | 5076 psi | - |
Maximum Pressure - Implement Circuit - Normal | - | - | 5076 psi | - |
Maximum Flow - Main System | - | - | - | 206 gal/min |
Swing Mechanism |
||||
Swing Speed | 11.5 r/min | 9.2 r/min | - | - |
Maximum Swing Torque | 81132 lb/ft | 37000 ft·lbf | - | 138000 ft·lbf |
Swing Torque | - | - | 44250 lb/ft | - |
Service Refill Capacities |
||||
Fuel Tank Capacity | 125.2 gal (US) | - | - | 188.9 gal (US) |
Cooling System | 6.6 gal (US) | 8.4 gal (US) | 10.6 gal (US) | 13.7 gal (US) |
Engine Oil | 6.6 gal (US) | - | 3.4 gal (US) | - |
Swing Drive | 2.6 gal (US) | - | - | 2.8 gal (US) |
Final Drive - Each | 1.5 gal (US) | - | - | 2.5 gal (US) |
Hydraulic System - Including Tank | 81.9 gal (US) | 71.3 gal (US) | 71.3 gal (US) | 145.3 gal (US) |
Hydraulic Tank | 38.8 gal (US) | 40.9 gal (US) | 52.8 gal (US) | 57.3 gal (US) |
DEF Tank | 10.8 gal (US) | - | - | 12.2 gal (US) |
Diesel Exhaust Fluid (DEF) | - | 7.9 gal (US) | 7.9 gal (US) | - |
Final Drive | - | 0.7 gal (US) | - | - |
Fuel Tank | - | 124.2 gal (US) | 124.2 gal (US) | - |
Engine Oil - With Filter | - | - | - | 10.6 gal (US) |
Dimensions |
||||
Boom | Reach 6.15 m (20'2") | 5260 mm (17'3") | VA 5.4m (17'10") | LRE Boom 11.5 m (37'9") |
Stick | Reach 3.2 m (10'6") | 2.5 m (8' 2") | 2.9m (9'2") | LRE Stick 8.5 m (27'11') |
Bucket | HD 1.76 m³ (2.30 yd³) | 0.98 m³ GD (1.28 yd³) | - | HD 1.19 m³ (1.56 yd³) |
Shipping Height - Top of Cab | 10 ft | 11 ft | - | 11.1 ft |
Handrail Height | 10 ft | - | - | 11.6 ft |
Shipping Length | 34.2 ft | 29.3 ft | 31.1 ft | 54 ft |
Tail Swing Radius | 10.3 ft | 8.5 ft | 9.2 ft | 12.3 ft |
Counterweight Clearance | 3.7 ft | 4.3 ft | 4.3 ft | 4.7 ft |
Ground Clearance | 1.6 ft | 1.4 ft | 1.25 ft | 2.3 ft |
Track Length | 15.9 ft | - | - | 17.6 ft |
Length to Center of Rollers | 13.1 ft | - | - | - |
Track Gauge | 8.5 ft | - | - | 10.6 ft |
Transport Width | 11.1 ft | - | - | 13.6 ft |
Support Point | - | 11.8 ft | 11.3 ft | - |
Wheel Base | - | 8.9 ft | 9 ft | - |
Shipping Height with Falling Object Guard | - | - | 11 ft | - |
Track Length to Center of Rollers | - | - | - | 14.2 ft |
Air Conditioning System |
||||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons). | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | - |
Sustainability |
||||
Recyclability | 97% | - | - | - |
Machine Weight |
||||
Operating Weight Maximum | - | 46740 lb | 52911 lb | - |
Operating Weight Minimum | - | 41450 lb | 44750 lb | - |
Transmission |
||||
Maximum Travel Speed | - | 21.7 mile/h | - | - |
Forward/Reverse - 2nd Gear | - | - | 18.6 mile/h | - |
Forward/Reverse - 1st Gear | - | - | 5.6 mile/h | - |
Creeper Speed - 1st Gear | - | - | 3.4 mile/h | - |
Creeper Speed - 2nd Gear | - | - | 9.3 mile/h | - |
Drawbar Pull | - | - | 28551 lbf | - |
Maximum Gradeability | - | - | 70% | - |
Working Ranges and Forces |
||||
Boom Type | - | VA Boom | VA 5.4m (17'10") | - |
Bucket | - | 0.98 m³ GD (1.28 yd³) | GD 1.2 m³ (1.7 yd³) | - |
Stick | - | 2.5 m (8' 2") | 2.9m (9'2") | - |
Reach at Ground Level | - | 30.5 ft | 33.4 ft | - |
Vertical Wall Digging Depth | - | 13.9 ft | 17.3 ft | - |
Cutting Height | - | 32.6 ft | - | - |
Bucket Forces (ISO) | - | 30799 lbf | 33946 lbf | - |
Stick Forces (ISO) | - | 20682 lbf | 23605 lbf | - |
Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | - | - |
Maximum Loading Height | - | - | 24.7 ft | - |
Maximum Digging Depth | - | - | 21.8 ft | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 21.6 ft | - |
working Ranges and Forces |
||||
Cutting Height | - | - | 35.8 ft | - |
Add a Similar Product:
- M319 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- M314 Wheeled Excavator Add
- Cat® 352 UHD Ultra High Demolition Hydraulic Excavator Add
- Cat® 395 Hydaulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- Cat® 352 Hydraulic Excavator Add
- Cat® 374 Hydraulic Excavator Add