Compare Equipment Go Back
330 Excavator | 30 Ton Excavator / Digger |
M314 Wheeled Excavator |
M320 Wheeled Excavator |
352 LRE Long Reach Excavation Hydraulic Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 273 hp | 134 hp | 171 hp | 424 hp |
Net Power - ISO 9249 (DIN) | 277 hp (metric) | 129 hp (metric) | 174 hp (metric) | 429.9 hp (metric) |
Engine Model | Cat C7.1 | Cat C3.6 | C4.4 | Cat C13 |
Engine Power - ISO 14396 | 275 hp | 134 hp | 174 hp | 425 hp |
Engine Power - ISO 14396 (DIN) | 279 hp (metric) | 136 hp (metric) | 176 hp (metric) | 431 hp (metric) |
Bore | 4 in | 3.9 in | 4 in | 5 in |
Stroke | 5 in | 5 in | 5.3 in | 6 in |
Displacement | 428 in³ | 221 in³ | 268.5 in³ | 763 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 69200 lb | - | - | 128800 lb |
Note | Long undercarriage, Reach boom, R3.2 m (10'6") stick, Heavy Duty (HD) 1.76 m³ (2.30 yd³) bucket, 800 mm (31") triple grouser shoes and 6700 kg (14,770 lb) counterweight. | - | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. |
Working Ranges & Forces |
||||
Maximum Digging Depth | 23.9 ft | - | - | 42.8 ft |
Boom | Reach 6.15 m (20'2") | - | - | LRE Boom 11.5 m (37'9") |
Stick | Reach 3.2 m (10'6") | - | - | LRE Stick 8.5 m (27'11') |
Bucket | HD 1.76 m³ (2.30 yd³) | - | - | HD 1.19 m³ (1.56 yd³) |
Maximum Reach at Ground Level | 35 ft | - | - | 64.4 ft |
Maximum Cutting Height | 32.9 ft | - | - | 48.2 ft |
Maximum Loading Height | 22.8 ft | - | - | 39.4 ft |
Minimum Loading Height | 7.5 ft | - | - | 7.3 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 23.3 ft | - | - | 42.5 ft |
Maximum Vertical Wall Digging Depth | 19.7 ft | - | - | - |
Bucket Digging Force - ISO | 40200 lbf | - | - | 31700 lbf |
Stick Digging Force - ISO | 28300 lbf | - | - | 23380 lbf |
Hydraulic System |
||||
Main System - Maximum Flow | 560 l/min (148 gal/min) | - | - | - |
Maximum Pressure - Equipment | 5075 psi | 5076 psi | 5366 psi | 5076 psi |
Maximum Pressure - Equipment - Lift Mode | 5510 psi | - | - | 5511 psi |
Maximum Pressure - Travel | 5075 psi | 5076 psi | 5076 gal/min | 5076 psi |
Maximum Pressure - Swing | 4320 psi | 5149 psi | 5729 gal/min | 3771 psi |
Main System - Maximum Flow - Implement | - | 71 gal/min | 81 gal/min | - |
Maximum Flow - Main System | - | - | - | 206 gal/min |
Swing Mechanism |
||||
Swing Speed | 11.5 r/min | 9.1 r/min | 9.2 r/min | - |
Maximum Swing Torque | 81132 lb/ft | 28860 ft·lbf | 37000 ft·lbf | 138000 ft·lbf |
Service Refill Capacities |
||||
Fuel Tank Capacity | 125.2 gal (US) | - | - | 188.9 gal (US) |
Cooling System | 6.6 gal (US) | 6.3 gal (US) | 8.4 gal (US) | 13.7 gal (US) |
Engine Oil | 6.6 gal (US) | - | - | - |
Swing Drive | 2.6 gal (US) | - | - | 2.8 gal (US) |
Final Drive - Each | 1.5 gal (US) | - | - | 2.5 gal (US) |
Hydraulic System - Including Tank | 81.9 gal (US) | 58.1 gal (US) | 71.3 gal (US) | 145.3 gal (US) |
Hydraulic Tank | 38.8 gal (US) | 23.8 gal (US) | 40.9 gal (US) | 57.3 gal (US) |
DEF Tank | 10.8 gal (US) | - | - | 12.2 gal (US) |
Diesel Exhaust Fluid (DEF) | - | 5.3 gal (US) | 7.9 gal (US) | - |
Final Drive | - | 0.6 gal (US) | 0.7 gal (US) | - |
Fuel Tank | - | 77.9 gal (US) | 124.2 gal (US) | - |
Engine Oil - With Filter | - | - | - | 10.6 gal (US) |
Dimensions |
||||
Boom | Reach 6.15 m (20'2") | 5m (16' 6") | 5260 mm (17'3") | LRE Boom 11.5 m (37'9") |
Stick | Reach 3.2 m (10'6") | 2.2m (7' 3") | 2.5 m (8' 2") | LRE Stick 8.5 m (27'11') |
Bucket | HD 1.76 m³ (2.30 yd³) | 0.76m3 (.78 yd3) | 0.98 m³ GD (1.28 yd³) | HD 1.19 m³ (1.56 yd³) |
Shipping Height - Top of Cab | 10 ft | 3315 ft | 11 ft | 11.1 ft |
Handrail Height | 10 ft | - | - | 11.6 ft |
Shipping Length | 34.2 ft | 26.9 ft | 29.3 ft | 54 ft |
Tail Swing Radius | 10.3 ft | 7.1 ft | 8.5 ft | 12.3 ft |
Counterweight Clearance | 3.7 ft | 4.1 ft | 4.3 ft | 4.7 ft |
Ground Clearance | 1.6 ft | 1.1 ft | 1.4 ft | 2.3 ft |
Track Length | 15.9 ft | - | - | 17.6 ft |
Length to Center of Rollers | 13.1 ft | - | - | - |
Track Gauge | 8.5 ft | - | - | 10.6 ft |
Transport Width | 11.1 ft | - | - | 13.6 ft |
Undercarriage Length | - | 16.1 ft | - | - |
Wheel Base | - | 8.2 ft | 8.9 ft | - |
Support Point | - | - | 11.8 ft | - |
Track Length to Center of Rollers | - | - | - | 14.2 ft |
Air Conditioning System |
||||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons). | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - |
Sustainability |
||||
Recyclability | 97% | 91% | - | - |
Machine Weight |
||||
Operating Weight Maximum | - | 39683 lb | 46740 lb | - |
Note (1) | - | Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. | - | - |
Operating Weight Minimum | - | 33069 lb | 41450 lb | - |
Drive |
||||
Maximum Travel Speed | - | 23 mile/h | - | - |
Working Ranges and Forces |
||||
Boom Type | - | VA Boom | VA Boom | - |
Bucket | - | 0.76m3 (0.99 y3) GD | 0.98 m³ GD (1.28 yd³) | - |
Stick | - | R2.2CB (7' 3") | 2.5 m (8' 2") | - |
Digging Height | - | 17.4 ft | - | - |
Dump Height | - | 23 ft | - | - |
Reach at Ground Level | - | 28.4 ft | 30.5 ft | - |
Vertical Wall Digging Depth | - | 13.9 ft | 13.9 ft | - |
Note (1) | - | Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | - |
Cutting Height | - | - | 32.6 ft | - |
Bucket Forces (ISO) | - | - | 30799 lbf | - |
Stick Forces (ISO) | - | - | 20682 lbf | - |
Transmission |
||||
Maximum Travel Speed | - | - | 21.7 mile/h | - |
Add a Similar Product:
- M319 Wheeled Excavator Add
- M322 Add
- M318 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- Cat® 395 Hydaulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- Cat® 352 UHD Ultra High Demolition Hydraulic Excavator Add
- Cat® 374 Hydraulic Excavator Add
- Cat® 352 Hydraulic Excavator Add