Compare Equipment Go Back
330 Excavator | 30 Ton Excavator / Digger |
M314 Wheeled Excavator |
M319 Wheeled Excavator |
Cat® 374 Hydraulic Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 273 hp | 134 hp | 171 hp | 484 hp |
Net Power - ISO 9249 (DIN) | 277 hp (metric) | 129 hp (metric) | 174 hp (metric) | 491 hp (metric) |
Engine Model | Cat C7.1 | Cat C3.6 | C4.4 | Cat C15 |
Engine Power - ISO 14396 | 275 hp | 134 hp | 174 hp | 485 hp |
Engine Power - ISO 14396 (DIN) | 279 hp (metric) | 136 hp (metric) | 176 hp (metric) | 492 hp (metric) |
Bore | 4 in | 3.9 in | 4.1 in | 5.4 in |
Stroke | 5 in | 5 in | 127 mm | 6.7 in |
Displacement | 428 in³ | 221 in³ | 268.5 in³ | 928 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 69200 lb | - | - | 162900 lb |
Note | Long undercarriage, Reach boom, R3.2 m (10'6") stick, Heavy Duty (HD) 1.76 m³ (2.30 yd³) bucket, 800 mm (31") triple grouser shoes and 6700 kg (14,770 lb) counterweight. | - | - | Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight. |
Working Ranges & Forces |
||||
Maximum Digging Depth | 23.9 ft | - | - | 28.1 ft |
Boom | Reach 6.15 m (20'2") | - | - | Reach 7.8m (25'7") |
Stick | Reach 3.2 m (10'6") | - | - | R3.6m (11'10") |
Bucket | HD 1.76 m³ (2.30 yd³) | - | - | SD 3.3 m³ (4.32 yd³) |
Maximum Reach at Ground Level | 35 ft | - | - | 43.2 ft |
Maximum Cutting Height | 32.9 ft | - | - | 41.2 ft |
Maximum Loading Height | 22.8 ft | - | - | 27.7 ft |
Minimum Loading Height | 7.5 ft | - | - | 10.1 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 23.3 ft | - | - | 27.8 ft |
Maximum Vertical Wall Digging Depth | 19.7 ft | - | - | 22.8 ft |
Bucket Digging Force - ISO | 40200 lbf | - | - | 80550 ft·lbf |
Stick Digging Force - ISO | 28300 lbf | - | - | 66390 ft·lbf |
Hydraulic System |
||||
Main System - Maximum Flow | 560 l/min (148 gal/min) | - | - | - |
Maximum Pressure - Equipment | 5075 psi | 5076 psi | - | 5366 psi |
Maximum Pressure - Equipment - Lift Mode | 5510 psi | - | - | 5511 psi |
Maximum Pressure - Travel | 5075 psi | 5076 psi | - | 5076 psi |
Maximum Pressure - Swing | 4320 psi | 5149 psi | - | 5076 psi |
Main System - Maximum Flow - Implement | - | 71 gal/min | 67 gal/min | 237 gal/min |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | 5366 psi | - |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | 5076 psi | - |
Maximum Pressure - Implement Circuit - Normal | - | - | 5076 psi | - |
Swing Mechanism |
||||
Swing Speed | 11.5 r/min | 9.1 r/min | 9.4 r/min | 6.34 r/min |
Maximum Swing Torque | 81132 lb/ft | 28860 ft·lbf | 32560 ft·lbf | 220000 ft·lbf |
Service Refill Capacities |
||||
Fuel Tank Capacity | 125.2 gal (US) | - | - | 243 gal (US) |
Cooling System | 6.6 gal (US) | 6.3 gal (US) | 35 l | 19 gal (US) |
Engine Oil | 6.6 gal (US) | - | - | 16 gal (US) |
Swing Drive | 2.6 gal (US) | - | - | 5 gal (US) |
Final Drive - Each | 1.5 gal (US) | - | - | 9 gal (US) |
Hydraulic System - Including Tank | 81.9 gal (US) | 58.1 gal (US) | 74 gal (US) | 164 gal (US) |
Hydraulic Tank | 38.8 gal (US) | 23.8 gal (US) | 31.7 gal (US) | 86 gal (US) |
DEF Tank | 10.8 gal (US) | - | - | 21 gal (US) |
Diesel Exhaust Fluid (DEF) | - | 5.3 gal (US) | 5.3 gal (US) | - |
Final Drive | - | 0.6 gal (US) | - | - |
Fuel Tank | - | 77.9 gal (US) | 76.6 gal (US) | - |
Dimensions |
||||
Boom | Reach 6.15 m (20'2") | 5m (16' 6") | VA 5.2 m (17'1") | Reach 7.8m (25'7") |
Stick | Reach 3.2 m (10'6") | 2.2m (7' 3") | 2.5m (8'2") | R3.6m (11'10") |
Bucket | HD 1.76 m³ (2.30 yd³) | 0.76m3 (.78 yd3) | GD 0.91 m³ (1.19 yd³ ) | SD 3.3 m³ (4.32 yd³) |
Shipping Height - Top of Cab | 10 ft | 3315 ft | 10.7 ft | 11.8 ft |
Handrail Height | 10 ft | - | - | 13 ft |
Shipping Length | 34.2 ft | 26.9 ft | 26.6 ft | 44.9 ft |
Tail Swing Radius | 10.3 ft | 7.1 ft | 6.25 ft | 13.8 ft |
Counterweight Clearance | 3.7 ft | 4.1 ft | 4.25 ft | 4.1 ft |
Ground Clearance | 1.6 ft | 1.1 ft | 1.4 ft | 2.6 ft |
Track Length | 15.9 ft | - | - | 19.3 ft |
Length to Center of Rollers | 13.1 ft | - | - | - |
Track Gauge | 8.5 ft | - | - | 11.2 ft |
Transport Width | 11.1 ft | - | - | 11.1 ft |
Undercarriage Length | - | 16.1 ft | 16.6 ft | - |
Wheel Base | - | 8.2 ft | 8.8 ft | - |
Support Point | - | - | 11.6 ft | - |
Track Length to Center of Rollers | - | - | - | 15.5 ft |
Note | - | - | - | Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps |
Air Conditioning System |
||||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons). | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | - |
Sustainability |
||||
Recyclability | 97% | 91% | - | - |
Machine Weight |
||||
Operating Weight Maximum | - | 39683 lb | 46407 lb | - |
Note (1) | - | Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. | - | - |
Operating Weight Minimum | - | 33069 lb | 41888 lb | - |
Drive |
||||
Maximum Travel Speed | - | 23 mile/h | - | - |
Working Ranges and Forces |
||||
Boom Type | - | VA Boom | VA 5.2 m (17'1") | - |
Bucket | - | 0.76m3 (0.99 y3) GD | GD 0.91 m³ (1.19 yd³ ) | - |
Stick | - | R2.2CB (7' 3") | 2.5m (8'2") | - |
Digging Height | - | 17.4 ft | 18.9 ft | - |
Dump Height | - | 23 ft | 25.6 ft | - |
Reach at Ground Level | - | 28.4 ft | 30.2 ft | - |
Vertical Wall Digging Depth | - | 13.9 ft | 14.6 ft | - |
Note (1) | - | Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a | - | - |
Stick Forces (ISO) | - | - | 16861 lbf | - |
Bucket Forces (ISO) | - | - | 26752 lbf | - |
Transmission |
||||
Maximum Travel Speed | - | - | 21.7 mile/h | - |
Forward/Reverse - 1st Gear | - | - | 6.2 mile/h | - |
Forward/Reverse - 2nd Gear | - | - | 21.7 mile/h | - |
Creeper Speed - 1st Gear | - | - | 3.4 mile/h | - |
Creeper Speed - 2nd Gear | - | - | 9.3 mile/h | - |
Drawbar Pull | - | - | 23380 lbf | - |
working Ranges and Forces |
||||
Cutting Height | - | - | 35.2 ft | - |
Add a Similar Product:
- M320 Wheeled Excavator Add
- M322 Add
- M315 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- Cat® 395 Hydaulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- Cat® 352 UHD Ultra High Demolition Hydraulic Excavator Add
- Cat® 352 Hydraulic Excavator Add