Compare Equipment Go Back
326 Hydraulic Excavator |
M315 Wheeled Excavator |
M322 |
Cat® 395 Hydaulic Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 201 hp | 145 hp | 171 hp | 542 hp |
Net Power - ISO 9249 (DIN) | 204 hp (metric) | 147 hp (metric) | 174 hp (metric) | 550 hp (metric) |
Engine Model | Cat C7.1 | C4.4 | C 7.1 | Cat C18 |
Engine Power - ISO 14396 | 202 hp | 148 hp | 174 hp | 543 hp |
Engine Power - ISO 14396 (DIN) | 205 hp (metric) | 150 hp (metric) | 176 hp (metric) | 551 hp (metric) |
Bore | 4 in | 4.1 in | 4.1 in | 6 in |
Stroke | 5 in | 127 mm | 5.3 in | 7 in |
Displacement | 428 in³ | 268.5 in³ | 427.8 in² | 1105 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 56400 lb | - | - | 207400 lb |
Note | Long undercarriage, Reach boom, R2.95 m (9'7") stick, 1.54 m³ (2.01 yd³) Heavy Duty (HD) bucket, 600 mm (24") triple grouser shoes and 4600 kg (10,140 lb) counterweight. | - | - | - |
Note (1) | - | - | - | Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. |
Working Ranges & Forces |
||||
Maximum Digging Depth | 22.4 ft | - | - | 31.9 ft |
Boom | Reach 5.9 m (19'4") | - | - | GP 8.4m (25'7") |
Stick | Reach 2.95 m (9'8") | - | - | R4.4m (14'5") |
Bucket | HD 1.54 m³ (2.01 yd³) | - | - | SD 5.2m³ (6.8 yd³) |
Maximum Reach at Ground Level | 33.2 ft | - | - | 48.3 ft |
Maximum Cutting Height | 31.8 ft | - | - | 44.5 ft |
Maximum Loading Height | 21.7 ft | - | - | 30.4 ft |
Minimum Loading Height | 7.8 ft | - | - | 9.11 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 21.8 ft | - | - | 31.4 ft |
Maximum Vertical Wall Digging Depth | 17.5 ft | - | - | 22.3 ft |
Bucket Digging Force - ISO | 37318 lbf | - | - | 86100 ft·lbf |
Stick Digging Force - ISO | 27202 lbf | - | - | 68540 ft·lbf |
Hydraulic System |
||||
Main System - Maximum Flow | 481 l/min (127 gal/min) | - | - | - |
Maximum Pressure - Equipment | 5075 psi | - | - | 5366 psi |
Maximum Pressure - Equipment - Lift Mode | 5510 psi | - | - | - |
Maximum Pressure - Travel | 5075 psi | - | - | 5076 psi |
Maximum Pressure - Swing | 4118 psi | - | - | 4496 psi |
Main System - Maximum Flow - Implement | - | 73 gal/min | 95 gal/min | 281 gal/min |
Maximum Pressure - Implement Circuit - Heavy Lift | - | 5366 psi | 5366 psi | - |
Maximum Pressure - Implement Circuit - Travel Circuit | - | 5076 psi | 5076 psi | - |
Maximum Pressure - Implement Circuit - Normal | - | 5076 psi | 5076 psi | - |
Swing Mechanism |
||||
Swing Speed | 9.9 r/min | 9.1 r/min | - | 6.26 r/min |
Maximum Swing Torque | 78180 lbf·ft | 30340 ft·lbf | - | 267333 ft·lbf |
Swing Torque | - | - | 44250 lb/ft | - |
Service Refill Capacities |
||||
Fuel Tank Capacity | 125.2 gal (US) | - | - | 322 gal (US) |
Cooling System | 6.6 gal (US) | 24 l | 10.6 gal (US) | 19 gal (US) |
Engine Oil | 6.6 gal (US) | - | 3.4 gal (US) | 18 gal (US) |
Swing Drive | 3 gal (US) | - | - | 6 gal (US) |
Final Drive - Each | 1.2 gal (US) | - | - | 5 gal (US) |
Hydraulic System - Including Tank | 81.9 gal (US) | 58.1 gal (US) | 71.3 gal (US) | 196 gal (US) |
Hydraulic Tank | 38.8 gal (US) | 23.8 gal (US) | 52.8 gal (US) | 98 gal (US) |
DEF Tank | 10.8 gal (US) | - | - | 21 gal (US) |
Fuel Tank | - | 74 gal (US) | 124.2 gal (US) | - |
Diesel Exhaust Fluid (DEF) | - | 5.3 gal (US) | 7.9 gal (US) | - |
Dimensions |
||||
Boom | Reach 5.9 m (19'4") | VA 5.2 m (17'1") | VA 5.4m (17'10") | GP 8.4m (25'7") |
Stick | Reach 2.95 m (9'8") | 2.5m (8'2") | 2.9m (9'2") | R4.4m (14'5") |
Bucket | HD 1.54 m³ (2.01 yd³) | GD 0.76 m³ (0.99 yd³ ) | - | SD 5.2m³ (6.8 yd³) |
Shipping Height - Top of Cab | 9.8 ft | 10.9 ft | - | 12 ft |
Handrail Height | 9.8 ft | - | - | 12.4 ft |
Shipping Length | 33 ft | 25.1 ft | 31.1 ft | 49.6 ft |
Tail Swing Radius | 9.8 ft | 5.9 ft | 9.2 ft | 15.11 ft |
Counterweight Clearance | 1.4 ft | 4.2 ft | 4.3 ft | 5.5 ft |
Ground Clearance | 3.5 ft | 1.5 ft | 1.25 ft | 2.9 ft |
Track Length | 15.2 ft | - | - | 20.1 ft |
Length to Center of Rollers | 12.6 ft | - | - | - |
Track Gauge | 8.5 ft | - | - | 11.6 ft |
Transport Width | 10.5 ft | - | - | 12.9 ft |
Support Point | - | 10.1 ft | 11.3 ft | - |
Undercarriage Length | - | 16 ft | - | - |
Wheel Base | - | 8.4 ft | 9 ft | - |
Shipping Height with Falling Object Guard | - | - | 11 ft | - |
Track Length to Center of Rollers | - | - | - | 16.1 ft |
Note | - | - | - | Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps |
Air Conditioning System |
||||
Note (1) | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - | - | - |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | - |
Air Conditioning | - | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Sustainability |
||||
Recyclability | 97% | - | - | 98% |
Machine Weight |
||||
Operating Weight Maximum | - | 39680 lb | 52911 lb | - |
Operating Weight Minimum | - | 34610 lb | 44750 lb | - |
Transmission |
||||
Maximum Travel Speed | - | 21.7 mile/h | - | - |
Forward/Reverse - 1st Gear | - | 6.2 mile/h | 5.6 mile/h | - |
Forward/Reverse - 2nd Gear | - | 21.7 mile/h | 18.6 mile/h | - |
Creeper Speed - 1st Gear | - | 3.4 mile/h | 3.4 mile/h | - |
Creeper Speed - 2nd Gear | - | 9.3 mile/h | 9.3 mile/h | - |
Drawbar Pull | - | 23380 lbf | 28551 lbf | - |
Maximum Gradeability | - | - | 70% | - |
Working Ranges and Forces |
||||
Boom Type | - | VA 5.2 m (17'1") | VA 5.4m (17'10") | - |
Stick | - | 2.5m (8'2") | 2.9m (9'2") | - |
Bucket | - | GD 0.76 m³ (0.99 yd³ ) | GD 1.2 m³ (1.7 yd³) | - |
Dump Height | - | 25.2 ft | - | - |
Digging Height | - | 18.4 ft | - | - |
Reach at Ground Level | - | 29.6 ft | 33.4 ft | - |
Vertical Wall Digging Depth | - | 15 ft | 17.3 ft | - |
Stick Forces (ISO) | - | 15961 lbf | 23605 lbf | - |
Bucket Forces (ISO) | - | 23830 lbf | 33946 lbf | - |
Maximum Loading Height | - | - | 24.7 ft | - |
Maximum Digging Depth | - | - | 21.8 ft | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 21.6 ft | - |
working Ranges and Forces |
||||
Cutting Height | - | 34.2 ft | 35.8 ft | - |
Add a Similar Product:
- M319 Wheeled Excavator Add
- M320 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- M314 Wheeled Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- Cat® 352 UHD Ultra High Demolition Hydraulic Excavator Add
- Cat® 374 Hydraulic Excavator Add
- Cat® 352 Hydraulic Excavator Add