Compare Equipment Go Back
320 GC Hydraulic Excavator |
M320 Wheeled Excavator |
Cat® 352 UHD Ultra High Demolition Hydraulic Excavator |
M319 Wheeled Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 146 hp | 171 hp | 424 hp | 171 hp |
Net Power - ISO 9249 (DIN) | 148 hp (metric) | 174 hp (metric) | 430 hp (metric) | 174 hp (metric) |
Engine Model | Cat C4.4 | C4.4 | Cat C13 | C4.4 |
Engine Power - ISO 14396 | 148 hp | 174 hp | 425 hp | 174 hp |
Engine Power - ISO 14396 (DIN) | 150 hp (metric) | 176 hp (metric) | 431 hp (metric) | 176 hp (metric) |
Bore | 4 in | 4 in | 5 in | 4.1 in |
Stroke | 5 in | 5.3 in | 6 in | 127 mm |
Displacement | 269 in³ | 268.5 in³ | 763 in³ | 268.5 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 48500 lb | - | 143300 lb | - |
Note | Long undercarriage, Reach boom, R2.9 (9'6") stick, General Duty (GD) 1.0 m³ (1.31 yd³) bucket, 700 mm (28 in) triple grouser shoes and 4200 kg (9,300 lb) counterweight. | - | - | - |
Note (1) | - | - | Hydraulic Variable Gauge undercarriage, 28 m (91'10") UHD front, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. No work tool. | - |
Machine Weight - Retrofit Configuration | - | - | 139300 lb | - |
Note (3) | - | - | Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.35TB (11'0") stick, HD 2.41 m³ ( 3.15 yd³) bucket, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. | - |
UHD in Cradle | - | - | 26000 lb | - |
Retrofit Boom in Cradle - R3.9 TB Stick | - | - | 16310 lb | - |
Retrofit Boom in Cradle - R3.35 TB Stick | - | - | 15950 lb | - |
Retrofit Boom in Cradle - R2.9 TB Stick | - | - | 15760 lb | - |
Working Ranges & Forces |
||||
Maximum Digging Depth | 22 ft | - | - | - |
Boom | Reach 5.7 m (18.8) | - | - | - |
Stick | Reach 2.9 m (9'6") | - | - | - |
Bucket | GD 1.0 m³ (1.31 yd³) | - | - | - |
Maximum Reach at Ground Level | 32.3 ft | - | - | - |
Maximum Cutting Height | 31 ft | - | - | - |
Maximum Loading Height | 21.3 ft | - | - | - |
Minimum Loading Height | 7.1 ft | - | - | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 21.6 ft | - | - | - |
Maximum Vertical Wall Digging Depth | 18.7 ft | - | - | - |
Bucket Digging Force - ISO | 28935 lbf | - | - | - |
Stick Digging Force - ISO | 22281 lbf | - | - | - |
Hydraulic System |
||||
Main System - Maximum Flow | 442 l/min (117 gal/min) | - | 779 l/min (206 gal/min) | - |
Maximum Pressure - Equipment | 5075 psi | 5366 psi | 5076 psi | - |
Maximum Pressure - Travel | 4974 psi | 5076 gal/min | 5076 psi | - |
Maximum Pressure - Swing | 3625 psi | 5729 gal/min | 3771 psi | - |
Main System - Maximum Flow - Implement | - | 81 gal/min | - | 67 gal/min |
Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi | - |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | - | 5366 psi |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | - | 5076 psi |
Maximum Pressure - Implement Circuit - Normal | - | - | - | 5076 psi |
Swing Mechanism |
||||
Swing Speed | 11.6 r/min | 9.2 r/min | 8.44 r/min | 9.4 r/min |
Maximum Swing Torque | 54900 ft·lbf | 37000 ft·lbf | 139000 ft·lbf | 32560 ft·lbf |
Service Refill Capacities |
||||
Fuel Tank Capacity | 86.6 gal (US) | - | 188.9 gal (US) | - |
Cooling System | 6.6 gal (US) | 8.4 gal (US) | 13.7 gal (US) | 35 l |
Engine Oil | 4 gal (US) | - | 10.6 gal (US) | - |
Swing Drive - Each | 3.2 gal (US) | - | 2.8 gal (US) | - |
Final Drive - Each | 1.1 gal (US) | - | 2.5 gal (US) | - |
Hydraulic System - Including Tank | 61.8 gal (US) | 71.3 gal (US) | 145.3 gal (US) | 74 gal (US) |
Hydraulic Tank | 30.4 gal (US) | 40.9 gal (US) | 57.3 gal (US) | 31.7 gal (US) |
DEF Tank | 10.3 gal (US) | - | 12.2 gal (US) | - |
Diesel Exhaust Fluid (DEF) | - | 7.9 gal (US) | - | 5.3 gal (US) |
Final Drive | - | 0.7 gal (US) | - | - |
Fuel Tank | - | 124.2 gal (US) | - | 76.6 gal (US) |
Dimensions |
||||
Boom | Reach 5.7 m (18'8") | 5260 mm (17'3") | - | VA 5.2 m (17'1") |
Stick | Reach 2.9 m (9'6") | 2.5 m (8' 2") | - | 2.5m (8'2") |
Bucket | GD 1.0 m³ (1.31 yd³) | 0.98 m³ GD (1.28 yd³) | - | GD 0.91 m³ (1.19 yd³ ) |
Shipping Height - Top of Cab | 9.7 ft | 11 ft | 11.1 ft | 10.7 ft |
Handrail Height | 9.8 ft | - | - | - |
Shipping Length | 31.3 ft | 29.3 ft | 61.8 ft | 26.6 ft |
Tail Swing Radius | 9.3 ft | 8.5 ft | 12.3 ft | 6.25 ft |
Counterweight Clearance | 3.4 ft | 4.3 ft | 4.7 ft | 4.25 ft |
Ground Clearance | 1.5 ft | 1.4 ft | 1.7 ft | 1.4 ft |
Track Length | 14.7 ft | - | 18.9 ft | - |
Length to Center of Rollers | 11.11 ft | - | - | - |
Track Gauge | 7.9 ft | - | - | - |
Transport Width | 10.4 ft | - | 10.7 ft | - |
Support Point | - | 11.8 ft | - | 11.6 ft |
Wheel Base | - | 8.9 ft | - | 8.8 ft |
Note (1) | - | - | 28 m (91'10") UHD Front | - |
Cab Height - With OPG | - | - | 11.8 ft | - |
Track Length to Center of Rollers | - | - | 15.6 ft | - |
Working Gauge - Extended Position | - | - | 11.2 ft | - |
Shipping Gauge - Retracted Position | - | - | 7.9 ft | - |
Machine Length - without Front, with Counterweight | - | - | 25.5 ft | - |
Machine Length - without Front and Counterweight | - | - | 24.9 ft | - |
Track Width - Extended | - | - | 13.1 ft | - |
Track Width - Retracted | - | - | 9.8 ft | - |
Note (2) | - | - | 600 mm (24") Track Shoes | - |
Undercarriage Length | - | - | - | 16.6 ft |
Air Conditioning System |
||||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons). | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | - |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. |
Sustainability |
||||
Recyclability | 97% | - | - | - |
Machine Weight |
||||
Operating Weight Maximum | - | 46740 lb | - | 46407 lb |
Operating Weight Minimum | - | 41450 lb | - | 41888 lb |
Transmission |
||||
Maximum Travel Speed | - | 21.7 mile/h | - | 21.7 mile/h |
Forward/Reverse - 1st Gear | - | - | - | 6.2 mile/h |
Forward/Reverse - 2nd Gear | - | - | - | 21.7 mile/h |
Creeper Speed - 1st Gear | - | - | - | 3.4 mile/h |
Creeper Speed - 2nd Gear | - | - | - | 9.3 mile/h |
Drawbar Pull | - | - | - | 23380 lbf |
Working Ranges and Forces |
||||
Boom Type | - | VA Boom | - | VA 5.2 m (17'1") |
Bucket | - | 0.98 m³ GD (1.28 yd³) | - | GD 0.91 m³ (1.19 yd³ ) |
Stick | - | 2.5 m (8' 2") | - | 2.5m (8'2") |
Reach at Ground Level | - | 30.5 ft | - | 30.2 ft |
Vertical Wall Digging Depth | - | 13.9 ft | - | 14.6 ft |
Cutting Height | - | 32.6 ft | - | - |
Bucket Forces (ISO) | - | 30799 lbf | - | 26752 lbf |
Stick Forces (ISO) | - | 20682 lbf | - | 16861 lbf |
Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | 28 m (91' 10") UHD Front Over-the-Front | - |
Maximum Pin Height at Stick Nose | - | - | 90.8 ft | - |
Maximum Weight at Stick Nose | - | - | 8157 lb | - |
Maximum Working Pin Height at Stick Nose - 1/2 | - | - | 75.2 ft | - |
Maximum Working Reach at Stick Nose - 1/2 | - | - | 45.4 ft | - |
Maximum Height at Stick Nose in Max Reach Position | - | - | 52.9 ft | - |
Maximum Reach at Stick Nose | - | - | 51.7 ft | - |
Dump Height | - | - | - | 25.6 ft |
Digging Height | - | - | - | 18.9 ft |
Swing Mechanism - UHD Fronts |
||||
Swing Speed | - | - | 4.22 r/min | - |
Working Ranges and Forces - Retrofit Boom - Straight |
||||
Note 1 | - | - | Straight - R3.35 m (11'0") Stick (Over-the-Front) | - |
Bucket | - | - | GD 3.08 m³ (4.03 yd³) | - |
Maximum Pin Height at Stick Nose | - | - | 39.8 ft | - |
Maximum Weight at Stick Nose | - | - | 13190 lb | - |
Maximum Height at Stick Nose in Max Reach Position | - | - | 7.7 ft | - |
Maximum Reach at Stick Nose | - | - | 36.5 ft | - |
Maximum Digging Depth | - | - | 17 ft | - |
Maximum Reach - Ground Level | - | - | 41.9 ft | - |
Maximum Loading Height | - | - | 33.6 ft | - |
Minimum Loading Height | - | - | 15 ft | - |
Bucket Digging Force - ISO | - | - | 60250 lbf | - |
Stick Digging Force - ISO | - | - | 44740 lbf | - |
Working Ranges and Forces - Retrofit Boom - Bent |
||||
Note 1 | - | - | Bent - R3.35 m (11'0") Stick | - |
Bucket | - | - | GD 3.08 m³ (4.03 yd³) | - |
Maximum Digging Depth | - | - | 21.9 ft | - |
Maximum Reach - Ground Level | - | - | 39 ft | - |
Maximum Cutting Height | - | - | 35.1 ft | - |
Maximum Loading Height | - | - | 24.6 ft | - |
Minimum Loading Height | - | - | 10 ft | - |
Bucket Digging Force - ISO | - | - | 60250 lbf | - |
Stick Digging Force - ISO | - | - | 44740 lbf | - |
working Ranges and Forces |
||||
Cutting Height | - | - | - | 35.2 ft |
Add a Similar Product:
- M322 Add
- M315 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- M314 Wheeled Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- Cat® 395 Hydaulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- Cat® 352 Hydraulic Excavator Add
- Cat® 374 Hydraulic Excavator Add