Compare Equipment Go Back
320 GC Hydraulic Excavator |
352 LRE Long Reach Excavation Hydraulic Excavator |
Cat® 352 UHD Ultra High Demolition Hydraulic Excavator |
M319 Wheeled Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 146 hp | 424 hp | 424 hp | 171 hp |
Net Power - ISO 9249 (DIN) | 148 hp (metric) | 429.9 hp (metric) | 430 hp (metric) | 174 hp (metric) |
Engine Model | Cat C4.4 | Cat C13 | Cat C13 | C4.4 |
Engine Power - ISO 14396 | 148 hp | 425 hp | 425 hp | 174 hp |
Engine Power - ISO 14396 (DIN) | 150 hp (metric) | 431 hp (metric) | 431 hp (metric) | 176 hp (metric) |
Bore | 4 in | 5 in | 5 in | 4.1 in |
Stroke | 5 in | 6 in | 6 in | 127 mm |
Displacement | 269 in³ | 763 in³ | 763 in³ | 268.5 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 48500 lb | 128800 lb | 143300 lb | - |
Note | Long undercarriage, Reach boom, R2.9 (9'6") stick, General Duty (GD) 1.0 m³ (1.31 yd³) bucket, 700 mm (28 in) triple grouser shoes and 4200 kg (9,300 lb) counterweight. | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. | - | - |
Note (1) | - | - | Hydraulic Variable Gauge undercarriage, 28 m (91'10") UHD front, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. No work tool. | - |
Machine Weight - Retrofit Configuration | - | - | 139300 lb | - |
Note (3) | - | - | Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.35TB (11'0") stick, HD 2.41 m³ ( 3.15 yd³) bucket, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. | - |
UHD in Cradle | - | - | 26000 lb | - |
Retrofit Boom in Cradle - R3.9 TB Stick | - | - | 16310 lb | - |
Retrofit Boom in Cradle - R3.35 TB Stick | - | - | 15950 lb | - |
Retrofit Boom in Cradle - R2.9 TB Stick | - | - | 15760 lb | - |
Working Ranges & Forces |
||||
Maximum Digging Depth | 22 ft | 42.8 ft | - | - |
Boom | Reach 5.7 m (18.8) | LRE Boom 11.5 m (37'9") | - | - |
Stick | Reach 2.9 m (9'6") | LRE Stick 8.5 m (27'11') | - | - |
Bucket | GD 1.0 m³ (1.31 yd³) | HD 1.19 m³ (1.56 yd³) | - | - |
Maximum Reach at Ground Level | 32.3 ft | 64.4 ft | - | - |
Maximum Cutting Height | 31 ft | 48.2 ft | - | - |
Maximum Loading Height | 21.3 ft | 39.4 ft | - | - |
Minimum Loading Height | 7.1 ft | 7.3 ft | - | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 21.6 ft | 42.5 ft | - | - |
Maximum Vertical Wall Digging Depth | 18.7 ft | - | - | - |
Bucket Digging Force - ISO | 28935 lbf | 31700 lbf | - | - |
Stick Digging Force - ISO | 22281 lbf | 23380 lbf | - | - |
Hydraulic System |
||||
Main System - Maximum Flow | 442 l/min (117 gal/min) | - | 779 l/min (206 gal/min) | - |
Maximum Pressure - Equipment | 5075 psi | 5076 psi | 5076 psi | - |
Maximum Pressure - Travel | 4974 psi | 5076 psi | 5076 psi | - |
Maximum Pressure - Swing | 3625 psi | 3771 psi | 3771 psi | - |
Maximum Flow - Main System | - | 206 gal/min | - | - |
Maximum Pressure - Equipment - Lift Mode | - | 5511 psi | 5511 psi | - |
Main System - Maximum Flow - Implement | - | - | - | 67 gal/min |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | - | 5366 psi |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | - | 5076 psi |
Maximum Pressure - Implement Circuit - Normal | - | - | - | 5076 psi |
Swing Mechanism |
||||
Swing Speed | 11.6 r/min | - | 8.44 r/min | 9.4 r/min |
Maximum Swing Torque | 54900 ft·lbf | 138000 ft·lbf | 139000 ft·lbf | 32560 ft·lbf |
Service Refill Capacities |
||||
Fuel Tank Capacity | 86.6 gal (US) | 188.9 gal (US) | 188.9 gal (US) | - |
Cooling System | 6.6 gal (US) | 13.7 gal (US) | 13.7 gal (US) | 35 l |
Engine Oil | 4 gal (US) | - | 10.6 gal (US) | - |
Swing Drive - Each | 3.2 gal (US) | - | 2.8 gal (US) | - |
Final Drive - Each | 1.1 gal (US) | 2.5 gal (US) | 2.5 gal (US) | - |
Hydraulic System - Including Tank | 61.8 gal (US) | 145.3 gal (US) | 145.3 gal (US) | 74 gal (US) |
Hydraulic Tank | 30.4 gal (US) | 57.3 gal (US) | 57.3 gal (US) | 31.7 gal (US) |
DEF Tank | 10.3 gal (US) | 12.2 gal (US) | 12.2 gal (US) | - |
Engine Oil - With Filter | - | 10.6 gal (US) | - | - |
Swing Drive | - | 2.8 gal (US) | - | - |
Fuel Tank | - | - | - | 76.6 gal (US) |
Diesel Exhaust Fluid (DEF) | - | - | - | 5.3 gal (US) |
Dimensions |
||||
Boom | Reach 5.7 m (18'8") | LRE Boom 11.5 m (37'9") | - | VA 5.2 m (17'1") |
Stick | Reach 2.9 m (9'6") | LRE Stick 8.5 m (27'11') | - | 2.5m (8'2") |
Bucket | GD 1.0 m³ (1.31 yd³) | HD 1.19 m³ (1.56 yd³) | - | GD 0.91 m³ (1.19 yd³ ) |
Shipping Height - Top of Cab | 9.7 ft | 11.1 ft | 11.1 ft | 10.7 ft |
Handrail Height | 9.8 ft | 11.6 ft | - | - |
Shipping Length | 31.3 ft | 54 ft | 61.8 ft | 26.6 ft |
Tail Swing Radius | 9.3 ft | 12.3 ft | 12.3 ft | 6.25 ft |
Counterweight Clearance | 3.4 ft | 4.7 ft | 4.7 ft | 4.25 ft |
Ground Clearance | 1.5 ft | 2.3 ft | 1.7 ft | 1.4 ft |
Track Length | 14.7 ft | 17.6 ft | 18.9 ft | - |
Length to Center of Rollers | 11.11 ft | - | - | - |
Track Gauge | 7.9 ft | 10.6 ft | - | - |
Transport Width | 10.4 ft | 13.6 ft | 10.7 ft | - |
Track Length to Center of Rollers | - | 14.2 ft | 15.6 ft | - |
Note (1) | - | - | 28 m (91'10") UHD Front | - |
Cab Height - With OPG | - | - | 11.8 ft | - |
Working Gauge - Extended Position | - | - | 11.2 ft | - |
Shipping Gauge - Retracted Position | - | - | 7.9 ft | - |
Machine Length - without Front, with Counterweight | - | - | 25.5 ft | - |
Machine Length - without Front and Counterweight | - | - | 24.9 ft | - |
Track Width - Extended | - | - | 13.1 ft | - |
Track Width - Retracted | - | - | 9.8 ft | - |
Note (2) | - | - | 600 mm (24") Track Shoes | - |
Support Point | - | - | - | 11.6 ft |
Undercarriage Length | - | - | - | 16.6 ft |
Wheel Base | - | - | - | 8.8 ft |
Air Conditioning System |
||||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons). | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | - |
Note | - | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. |
Sustainability |
||||
Recyclability | 97% | - | - | - |
Working Ranges and Forces |
||||
Maximum Pin Height at Stick Nose | - | - | 90.8 ft | - |
Maximum Weight at Stick Nose | - | - | 8157 lb | - |
Maximum Working Pin Height at Stick Nose - 1/2 | - | - | 75.2 ft | - |
Maximum Working Reach at Stick Nose - 1/2 | - | - | 45.4 ft | - |
Maximum Height at Stick Nose in Max Reach Position | - | - | 52.9 ft | - |
Maximum Reach at Stick Nose | - | - | 51.7 ft | - |
Note (1) | - | - | 28 m (91' 10") UHD Front Over-the-Front | - |
Boom Type | - | - | - | VA 5.2 m (17'1") |
Stick | - | - | - | 2.5m (8'2") |
Bucket | - | - | - | GD 0.91 m³ (1.19 yd³ ) |
Dump Height | - | - | - | 25.6 ft |
Digging Height | - | - | - | 18.9 ft |
Reach at Ground Level | - | - | - | 30.2 ft |
Vertical Wall Digging Depth | - | - | - | 14.6 ft |
Stick Forces (ISO) | - | - | - | 16861 lbf |
Bucket Forces (ISO) | - | - | - | 26752 lbf |
Swing Mechanism - UHD Fronts |
||||
Swing Speed | - | - | 4.22 r/min | - |
Working Ranges and Forces - Retrofit Boom - Straight |
||||
Note 1 | - | - | Straight - R3.35 m (11'0") Stick (Over-the-Front) | - |
Bucket | - | - | GD 3.08 m³ (4.03 yd³) | - |
Maximum Pin Height at Stick Nose | - | - | 39.8 ft | - |
Maximum Weight at Stick Nose | - | - | 13190 lb | - |
Maximum Height at Stick Nose in Max Reach Position | - | - | 7.7 ft | - |
Maximum Reach at Stick Nose | - | - | 36.5 ft | - |
Maximum Digging Depth | - | - | 17 ft | - |
Maximum Reach - Ground Level | - | - | 41.9 ft | - |
Maximum Loading Height | - | - | 33.6 ft | - |
Minimum Loading Height | - | - | 15 ft | - |
Bucket Digging Force - ISO | - | - | 60250 lbf | - |
Stick Digging Force - ISO | - | - | 44740 lbf | - |
Working Ranges and Forces - Retrofit Boom - Bent |
||||
Note 1 | - | - | Bent - R3.35 m (11'0") Stick | - |
Bucket | - | - | GD 3.08 m³ (4.03 yd³) | - |
Maximum Digging Depth | - | - | 21.9 ft | - |
Maximum Reach - Ground Level | - | - | 39 ft | - |
Maximum Cutting Height | - | - | 35.1 ft | - |
Maximum Loading Height | - | - | 24.6 ft | - |
Minimum Loading Height | - | - | 10 ft | - |
Bucket Digging Force - ISO | - | - | 60250 lbf | - |
Stick Digging Force - ISO | - | - | 44740 lbf | - |
Machine Weight |
||||
Operating Weight Maximum | - | - | - | 46407 lb |
Operating Weight Minimum | - | - | - | 41888 lb |
Transmission |
||||
Maximum Travel Speed | - | - | - | 21.7 mile/h |
Forward/Reverse - 1st Gear | - | - | - | 6.2 mile/h |
Forward/Reverse - 2nd Gear | - | - | - | 21.7 mile/h |
Creeper Speed - 1st Gear | - | - | - | 3.4 mile/h |
Creeper Speed - 2nd Gear | - | - | - | 9.3 mile/h |
Drawbar Pull | - | - | - | 23380 lbf |
working Ranges and Forces |
||||
Cutting Height | - | - | - | 35.2 ft |
Add a Similar Product: