|
|
|
|
|
Engine |
Engine Model |
Cat C9.3B |
- |
Cat® C3.6 |
Cat C9.3B |
Power - Net |
215 hp |
- |
104 hp |
265 hp |
Net Power - Rated - ISO 9249/SAE J1349 |
215 hp |
- |
- |
265 hp |
Net Power (Rated) - ISO 9249 (DIN) |
219 mhp |
- |
- |
268 mhp |
Emissions |
U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V |
- |
- |
U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV |
Note (1) |
Rated horsepower at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a |
- |
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t |
Note (2) |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( |
- |
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( |
Note (3) |
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. |
- |
- |
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. |
Note (4) |
Machine Build Number 20B |
- |
- |
Machine Build Number 17A |
Displacement |
- |
- |
220 in³ |
- |
Net Power - 2,200 rpm - SAE J1349 |
- |
- |
104 hp |
- |
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 |
- |
- |
104 hp |
- |
Power Train |
- |
- |
Hydrostatic |
- |
Weights |
Operating Weight |
50733 lb |
- |
20640 lb |
65644 lb |
Operating Weight - LGP |
- |
- |
21369 lb |
- |
Operating Weight - LGP, 762 mm/30 in |
- |
- |
21810 lb |
- |
Note (2) |
- |
- |
For machine with ripper, add 554 kg (1,222 lb). |
- |
Note (1) |
- |
- |
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. |
Transmission |
Powertrain |
Fully Automatic 4-Speed Powershift |
- |
- |
Fully Automatic 4-Speed |
Transmission Type |
- |
Cat Planetary Power Shift |
- |
- |
Forward - 1 |
- |
3.7 mile/h |
- |
- |
Forward - 2 |
- |
6.5 mile/h |
- |
- |
Forward - 3 |
- |
11.2 mile/h |
- |
- |
Forward - 4 |
- |
19.4 mile/h |
- |
- |
Reverse - 1 |
- |
4.2 mile/h |
- |
- |
Reverse - 2 |
- |
7.3 mile/h |
- |
- |
Reverse - 3 |
- |
12.8 mile/h |
- |
- |
Reverse - 4 |
- |
22.1 mile/h |
- |
- |
Drive Pumps |
- |
- |
1 |
- |
Maximum Travel Speed - Forward |
- |
- |
5.6 mile/h |
- |
Maximum Travel Speed - Reverse |
- |
- |
6.2 mile/h |
- |
Track Motors |
- |
- |
2 |
- |
Relief Valve Settings |
- |
- |
7033 psi |
- |
Service Refill Capacities |
Fuel Tank |
90 gal (US) |
132.1 gal (US) |
51.5 gal (US) |
123 gal (US) |
DEF Tank |
7.4 gal (US) |
- |
- |
12 gal (US) |
Diesel Exhaust Fluid Tank |
- |
4.2 gal (US) |
- |
- |
Cooling Systems - Tier 4 Final/EU Stage V |
- |
21.4 gal (US) |
- |
- |
Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA |
- |
19.3 gal (US) |
- |
- |
Engine Crankcase |
- |
5.3 gal (US) |
- |
- |
Transmission |
- |
13.2 gal (US) |
- |
- |
Differential - Final Drives - Front |
- |
17.2 gal (US) |
- |
- |
Differential - Final Drives - Rear |
- |
17.2 gal (US) |
- |
- |
Hydraulic System - Implement/Steering |
- |
34.1 gal (US) |
- |
- |
Hydraulic Tank Only |
- |
19.8 gal (US) |
- |
- |
Cooling System |
- |
- |
5 gal (US) |
- |
Final Drive - Each - LGP |
- |
- |
2.6 gal (US) |
- |
Crankcase - With Filter |
- |
- |
2.8 gal (US) |
- |
Transmission - Hydraulic Tank |
- |
- |
23.8 gal (US) |
- |
Final Drives - Each Side |
- |
- |
2.6 gal (US) |
- |
Diesel Exhaust Fluid (DEF) Tank |
- |
- |
4.9 gal (US) |
- |
D6 Push Arm |
Operating Weight |
48788 lb |
- |
- |
- |
Ground Pressure |
7.9 psi |
- |
- |
- |
Width of Standard Shoe |
24 in |
- |
- |
- |
Blade |
Semi-Universal (SU) |
- |
- |
- |
Blade Capacity |
7.5 yd³ |
- |
- |
- |
D6 LGP (30-in) Push Arm |
Operating Weight |
50420 lb |
- |
- |
- |
Ground Pressure |
6.5 psi |
- |
- |
- |
Width of Standard Shoe |
30 in |
- |
- |
- |
Blade |
Semi-Universal (SU) |
- |
- |
- |
Blade Capacity |
7.6 yd³ |
- |
- |
- |
D6 LGP (36-in) Push Arm |
Operating Weight |
52715 lb |
- |
- |
- |
Ground Pressure |
5.2 psi |
- |
- |
- |
Width of Standard Shoe |
36 in |
- |
- |
- |
Blade |
Straight |
- |
- |
- |
Blade Capacity |
5 yd³ |
- |
- |
- |
D6 VPAT |
Operating Weight |
49108 lb |
- |
- |
- |
Ground Pressure |
7.1 psi |
- |
- |
- |
Width of Standard Shoe |
24 in |
- |
- |
- |
Blade |
VPAT |
- |
- |
- |
Blade Capacity |
5.4 yd³ |
- |
- |
- |
D6 LGP (30-in) VPAT |
Operating Weight |
50733 lb |
- |
- |
- |
Ground Pressure |
5.9 psi |
- |
- |
- |
Width of Standard Shoe |
30 in |
- |
- |
- |
Blade |
VPAT |
- |
- |
- |
Blade Capacity |
5.9 yd³ |
- |
- |
- |
D6 LGP (36-in) VPAT |
Operating Weight |
51912 lb |
- |
- |
- |
Ground Pressure |
5 psi |
- |
- |
- |
Width of Standard Shoe |
36 in |
- |
- |
- |
Blade |
VPAT |
- |
- |
- |
Blade Capacity |
6.5 yd³ |
- |
- |
- |
Sustainability |
Recyclability |
98% |
- |
- |
98% |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. |
Engine - Tier 4 Final/EU Stage V |
Engine Model |
- |
Cat C7.1 |
- |
- |
Net Power (SAE J1349:2011) |
- |
249 hp |
- |
- |
Net Power (ISO 9249:2007) |
- |
249 hp |
- |
- |
Emissions |
- |
U.S. EPA Tier 4 Final/EU Stage V |
- |
- |
Rated Speed |
- |
2200 r/min |
- |
- |
Gross Power (SAE J1995:2014) |
- |
284 hp |
- |
- |
Engine Power (ISO 14396:2002) |
- |
275 hp |
- |
- |
Peak Torque - 1,400 rpm |
- |
902 lb/ft |
- |
- |
Torque Rise |
- |
52% |
- |
- |
Bore |
- |
4.1 in |
- |
- |
Stroke |
- |
5.3 in |
- |
- |
Displacement |
- |
427.8 in³ |
- |
- |
High Idle Speed |
- |
2270 r/min |
- |
- |
Low Idle Speed |
- |
800 r/min |
- |
- |
Maximum Altitude without Derating |
- |
9842.5 ft |
- |
- |
Note |
- |
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. |
- |
- |
Operating Specifications - Tier 4 Final/EU Stage V |
Operating Weight |
- |
48526 lb |
- |
- |
Scoops |
Chip Scoop Doze Capacity |
- |
37.9 yd³ |
- |
- |
Chip Scoop Carry Capacity |
- |
19 yd³ |
- |
- |
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA |
Engine Model |
- |
Cat C7.1 |
- |
- |
Emissions |
- |
Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA |
- |
- |
Rated Speed |
- |
2200 r/min |
- |
- |
Net Power (SAE J1349:2011) |
- |
249 hp |
- |
- |
Gross Power (SAE J1995:2014) |
- |
286 hp |
- |
- |
Engine Power (ISO 14396:2002) |
- |
275 hp |
- |
- |
Peak Torque - 1,400 rpm |
- |
749 lb/ft |
- |
- |
Torque Rise |
- |
26% |
- |
- |
Bore |
- |
4.1 in |
- |
- |
Stroke |
- |
5.3 in |
- |
- |
Displacement |
- |
427.8 in³ |
- |
- |
High Idle Speed |
- |
2270 r/min |
- |
- |
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA |
Operating Weight |
- |
47887 lb |
- |
- |
Operating Specifications - Tier 4 Final/EU Stage V - Scoop |
Operating Weight |
- |
52280 lb |
- |
- |
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop |
Operating Weight |
- |
51639 lb |
- |
- |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
- |
Pilot operated LS valve with EH |
- |
- |
Lift/Tilt System |
- |
Variable displacement piston |
- |
- |
Maximum Flow at 2,200 rpm |
- |
23.5 gal/min |
- |
- |
Relief Valve Setting - Lift/Tilt |
- |
3190 psi |
- |
- |
Cylinders, Double Acting - Lift, Bore and Stroke |
- |
120 mm × 915 mm (4.7 in × 36.0 in) |
- |
- |
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke |
- |
101.6 mm × 234 mm (4.0 in × 9.2 in) |
- |
- |
Pilot System |
- |
Open center, fixed displacement gear |
- |
- |
Pilot Relief Valve Setting |
- |
3046 psi |
- |
- |
Hydraulic System - Steering |
Steering System - Circuit |
- |
Pilot, load sensing |
- |
- |
Steering System - Pump |
- |
Variable displacement piston |
- |
- |
Maximum Flow at 2,200 rpm |
- |
38.8 gal/min |
- |
- |
Relief Valve Setting - Steering |
- |
4003 psi |
- |
- |
Total Steering Angle |
- |
72° |
- |
- |
Steering Cycle Times - High Idle |
- |
3 s |
- |
- |
Steering Cycle Times - Low Idle |
- |
8.2 s |
- |
- |
Axles |
Front |
- |
Planetary – Fixed |
- |
- |
Rear |
- |
Planetary – Oscillating |
- |
- |
Oscillation Angle |
- |
±10° |
- |
- |
Braking System |
Service Brakes |
- |
Single Disc Wet (enclosed) 4 WHL |
- |
- |
Parking Brake |
- |
Drum and Shoe, Spring Applied, Hydraulic Released |
- |
- |
Dimensions (Approximate) |
Height to Top of Beacon |
- |
13.1 ft |
- |
- |
Height - Top of Cab |
- |
12.1 ft |
- |
- |
Height - Top of Exhaust Pipe |
- |
11.3 ft |
- |
- |
Height - Top of Hood |
- |
8.7 ft |
- |
- |
Height to Top of Radiator Guard |
- |
8 ft |
- |
- |
Ground Clearance to Hitch |
- |
1.4 ft |
- |
- |
Ground Clearance to Transmission Guard |
- |
1.4 ft |
- |
- |
Ground Clearance to Bottom of Bumper |
- |
2.3 ft |
- |
- |
Centerline of Rear Axle to Bumper |
- |
6.5 ft |
- |
- |
Centerline of Front Axle to Hitch |
- |
5.5 ft |
- |
- |
Wheel Base |
- |
11 ft |
- |
- |
Width over Platform |
- |
10.3 ft |
- |
- |
Overall Length to Front Tire |
- |
21 ft |
- |
- |
Overall Machine Length with Straight Blade |
- |
23.6 ft |
- |
- |
Overall Machine Length with Coal Blade |
- |
25.5 ft |
- |
- |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
Operator Sound Level (ISO 6396) |
- |
70 dB(A) |
- |
- |
Machine Sound Level (ISO 6395) |
- |
111 dB(A) |
- |
- |
Note (1) |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (2) |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
- |
Note (3) |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (4) |
- |
The operator sound pressure level uncertainty is ± 2 dB(A) |
- |
- |
Sound Performance - Tier 4 Final/EU Stage V - Suppression |
Operator Sound Level (ISO 6396) |
- |
70 dB(A) |
- |
- |
Machine Sound Level (ISO 6395) |
- |
109 dB(A) |
- |
- |
Note (1) |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (2) |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
- |
Note (3) |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (4) |
- |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
- |
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard |
Operator Sound Level (ISO 6396) |
- |
70 dB(A) |
- |
- |
Machine Sound Level (ISO 6395) |
- |
112 dB(A) |
- |
- |
Note (1) |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (2) |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
- |
Note (3) |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (4) |
- |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
- |
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression |
Operator Sound Level (ISO 6396) |
- |
70 dB(A) |
- |
- |
Machine Sound Level (ISO 6395) |
- |
110 dB(A) |
- |
- |
Note (1) |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (2) |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
- |
Note (3) |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (4) |
- |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
- |
Hydraulic Controls |
Pump Output |
- |
- |
17.2 gal/min |
- |
Relief Valve Settings |
- |
- |
2988 psi |
- |
Ripper |
Type |
- |
- |
Parallelogram |
- |
Number of Shanks |
- |
- |
3 |
- |
Height |
- |
- |
6.5 in |
- |
Weight |
- |
- |
1222 lb |
- |
Maximum Digging Depth |
- |
- |
13.3 in |
- |
Maximum Reach - Ground Line |
- |
- |
30.2 in |
- |
Overall Width |
- |
- |
67.3 in |
- |
Maximum Ground Clearance Under Tip |
- |
- |
17.6 in |
- |
Undercarriage |
Ground Pressure - LGP |
- |
- |
4.5 psi |
- |
Track Gauge - LGP |
- |
- |
69 in |
- |
Length - Track on Ground - LGP |
- |
- |
91 in |
- |
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage |
- |
- |
40 |
- |
Ground Pressure - LGP, 762 mm (30 in) |
- |
- |
3.9 psi |
- |
Length - Track on Ground - LGP, 762 mm (30 in) |
- |
- |
91 in |
- |
Shoe Width - LGP |
- |
- |
26 in |
- |
Shoe Width - LGP, 762 mm (30 in) |
- |
- |
30 in |
- |
Track Gauge |
- |
- |
63 in |
- |
Number of Rollers - Each Side |
- |
- |
7 |
- |
Track Gauge - LGP, 762 mm (30 in) |
- |
- |
73 in |
- |
Ground Pressure |
- |
- |
5.7 psi |
- |
Length of Track on Ground |
- |
- |
91 in |
- |
Number of Shoes - Each Side - Abrasion Undercarriage |
- |
- |
36 |
- |
Shoe Width - Standard |
- |
- |
20 in |
- |
Dimensions |
BLADE: Blade Width - LGP |
- |
- |
126.7 in |
- |
Track Gauge - LGP, 762 mm (30 in) |
- |
- |
73 in |
- |
BLADE: Digging Depth - LGP |
- |
- |
23.2 in |
- |
Track Gauge - LGP |
- |
- |
67.9 in |
- |
BLADE: Blade Capacity (SAE) - LGP |
- |
- |
3.06 yd³ |
- |
BLADE: Blade Width at Maximum Angle - LGP |
- |
- |
115.8 in |
- |
BLADE: Blade Cutting Edge Angle, Adjustable - LGP |
- |
- |
52° to 58° |
- |
Ground Clearance - LGP, 762 mm (30 in) |
- |
- |
13 in |
- |
BLADE: Blade Height - LGP |
- |
- |
39.8 in |
- |
BLADE: Blade Lift Height - LGP |
- |
- |
30.2 in |
- |
Ground Clearance - LGP |
- |
- |
13 in |
- |
Overall Length - With Blade - LGP, 762 mm (30 in) |
- |
- |
169.6 in |
- |
Overall Length - With Blade - LGP |
- |
- |
169.6 in |
- |
Note |
- |
- |
Abrasion Undercarriage |
- |
BLADE: Maximum Tilt - LGP |
- |
- |
17.7 in |
- |
BLADE: Maximum Angle (either side) - LGP |
- |
- |
25° |
- |
BLADE: Blade Capacity (SAE) - Standard |
- |
- |
2.86 yd³ |
- |
Track Gauge - Standard |
- |
- |
63 in |
- |
BLADE: Digging Depth - Standard |
- |
- |
23.8 in |
- |
BLADE: Blade Lift Height - Standard |
- |
- |
30.2 in |
- |
Ground Clearance - Standard |
- |
- |
13 in |
- |
Overall Length - With Blade - Standard |
- |
- |
170.7 in |
- |
BLADE: Blade Cutting Edge Angle, Adjustable - Standard |
- |
- |
52° to 58° |
- |
BLADE: Blade Height - Standard |
- |
- |
42.2 in |
- |
BLADE: Maximum Tilt - Standard |
- |
- |
15.8 in |
- |
BLADE: Blade Width - Standard |
- |
- |
109.5 in |
- |
BLADE: Blade Width at Maximum Angle - Standard |
- |
- |
103.8 in |
- |
BLADE: Maximum Angle (either side) - Standard |
- |
- |
25° |
- |
Length of Basic Dozer (without blade) - Standard |
- |
- |
128.7 in |
- |
Dozer Height - Standard |
- |
- |
109 in |
- |
Width of Dozer (standard shoes, no blade) - LGP |
- |
- |
94.9 in |
- |
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) |
- |
- |
103.5 in |
- |
Length of Basic Dozer (without blade) - LGP |
- |
- |
128.7 in |
- |
Dozer Height - LGP, 762 mm (30 in) |
- |
- |
109 in |
- |
Width of Dozer (standard shoes, no blade) - Standard |
- |
- |
83 in |
- |
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) |
- |
- |
128.7 in |
- |
Dozer Height - LGP |
- |
- |
109 in |
- |
Cab |
ROPS |
- |
- |
ISO 3471:2008 |
- |
FOPS |
- |
- |
ISO 3449:2005 Level II |
- |
Retrieval Winch |
Maximum Line Pull - Bare Drum |
- |
- |
32150 lb |
- |
Control |
- |
- |
Hydraulic |
- |
Rope Diameter - Optional |
- |
- |
0.75 in |
- |
Drum Capacity - Optional Cable |
- |
- |
195 ft |
- |
Maximum Line Speed - Full Drum |
- |
- |
79 ft/min |
- |
Drum Capacity - Recommended Cable |
- |
- |
277 ft |
- |
Winch Drive |
- |
- |
Hydraulic |
- |
Weight |
- |
- |
1747 lb |
- |
Maximum Line Pull - Full Drum |
- |
- |
20350 lb |
- |
Rope Diameter - Recommended |
- |
- |
0.63 in |
- |
Maximum Line Speed - Bare Drum |
- |
- |
50 ft/min |
- |
Speed |
- |
- |
Variable |
- |
Winch Length |
- |
- |
35.63 in |
- |
Drum Diameter |
- |
- |
8 in |
- |
Overall width |
- |
- |
27.91 in |
- |
Drum Width |
- |
- |
9.65 in |
- |
Throat Clearance |
- |
- |
5.6 in |
- |
High Performance Winch |
Winch length |
- |
- |
27.76 in |
- |
Rope diameter – optional |
- |
- |
0.75 in |
- |
Maximum line speed – bare drum |
- |
- |
131 ft/min |
- |
Maximum line pull – bare drum |
- |
- |
40000 lb |
- |
Weight |
- |
- |
1345 lb |
- |
Drum capacity – optional |
- |
- |
256 ft |
- |
Maximum line speed – full drum |
- |
- |
207 ft/min |
- |
Rope diameter – recommended |
- |
- |
0.63 in |
- |
Winch drive |
- |
- |
Hydrostatic |
- |
Throat clearance |
- |
- |
6.75 in |
- |
Drum diameter |
- |
- |
10 in |
- |
Overall width |
- |
- |
29.2 in |
- |
Drum width |
- |
- |
10.8 in |
- |
Maximum line pull – full drum |
- |
- |
25000 lb |
- |
Speed |
- |
- |
Variable |
- |
Drum capacity – recommended cable |
- |
- |
371 ft |
- |
Control |
- |
- |
Hydraulic |
- |
Standard SU |
Operating Weight |
- |
- |
- |
65644 lb |
Ground Pressure |
- |
- |
- |
10 psi |
Width of Standard Shoe |
- |
- |
- |
24 in |
Blade |
- |
- |
- |
Semi-Universal (SU) |
Blade Capacity |
- |
- |
- |
10 yd³ |
LGP S |
Operating Weight |
- |
- |
- |
63220 lb |
Ground Pressure |
- |
- |
- |
6 psi |
Width of Standard Shoe |
- |
- |
- |
36 in |
Blade |
- |
- |
- |
Straight (S) |
Blade Capacity |
- |
- |
- |
8 yd³ |
Waste Handler |
Operating Weight |
- |
- |
- |
62035 lb |
Ground Pressure |
- |
- |
- |
10 psi |
Width of Standard Shoe |
- |
- |
- |
24 in |
Blade |
- |
- |
- |
Universal Landfill (U) |
Blade Capacity |
- |
- |
- |
22 yd³ |
|
Note (2) |
- |
- |
- |
Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. |