Cat?� C1.5 Diesel Engine
Product description
The Cat?� C1.5 Industrial Diesel Engine is offered in ratings ranging from 20.9-30 bkW (28-40.2 bhp) @ 2200-3000 rpm. These ratings meet EU Stage IIIA emission standards. Applications powered by C1.5 engines include: Agriculture Tractors, Combines and Harvesters, Aircraft Ground Support, Bore/Drill Rigs, Chippers, Grinders, Compactors, Rollers, Compressors, Construction, Irrigation, Pumps, Turf, Landscaping, Mobile Earthmoving, Paving, Trenchers, Underground Mining, and Material Handling.
Power Rating
- Maximum Power - 40.2HP
- Maximum Torque - 83lb-ft @ 1800 rpm
- Rated Speed - 2200-3000 rpm
- Minimum Power - 27.8HP
Emission Standards
- Emissions - U.S. EPA Tier 4 Interim Equivalent
Engine Dimensions - Approximate
- Length - 22.5in
- Width - 20.3in
- Height - 25.3in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments - 345lb
General
- Engine Configuration - Inline 3, 4-Stroke-Cycle Diesel
- Bore - 3.3in
- Stroke - 3.5in
- Displacement - 91in³
- Compression Ratio - 22.5:1
- Aspiration - Naturally Aspirated (NA) or Turbocharged (T)
- Combustion System - Indirect Injection
- Rotation from Flywheel End - Counterclockwise
- Aftertreatment - -
Standard Equipment:
-
- Air Inlet System
-
- Inlet manifold with choice of inlets.
-
- Control System
-
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
-
- Cooling System
-
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
-
- Flywheel & Flywheel Housing
-
- Naturally Aspirated: SAE No. 7 1/2 flywheel
- Turbocharged: SAE No. 6 1/2 or SAE No. 7 1/2 flywheel
- Naturally Aspirated: Choice of SAE No. 4 or standard backplate flywheel housing
- Turbocharged: Choice of SAE No. 4 or SAE No. 5 or standard backplate flywheel housing
-
- Fuel System
-
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
-
- Lube System
-
- Alternative oil fillers
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
-
- General
-
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request